Mathsma wrote:

Fookiezi wrote:

can someone help me ?
Basically what i want is like a dot, then no dot after.
So what i did i changed the default-1 to a dot, then default-2 to insvible 1x1 pixel and so on.
The problem that i encaunterd is if a slider hit circle number is 2 4 6 8, you can't see where the start of it is.( i know you can technically see where it stars forming).
What i want is there to be a dot on the start of every slider, so can either someone help me or just do it for me? nobody that i asked knows.
here is the skin: https://www.mediafire.com/?tah7l2ddnehv17d

Sort of like this?

pic

If it's like that, what you do is make the numbers like an overlay and then in the skin.ini you make the HitCircleOverlap equal to the image width of the default-x.
Here are the ones from my skin - http://puu.sh/bbTVi/562e7cae99.zip - Add HitCircleOverlap: 128 to your skin.ini if it is not there or if it is different.

Frostei wrote:

proximuhtyz wrote:

Hmmmm for some reason my section fail sound is alot softer and barely can hear it unlike all my other sounds.

Is this a quality problem or can i change it to be louder from some sort of skin.ini setting

Just download Audacity or something similar to it and increase the volume of the sound file with it. I'm not sure if increasing the effect volume in options would make the section fail sound louder. Can't hurt to try that first though

Mathsma wrote:

I'll upload my current skin so you can look at it and try to figure out what is different with yours. http://puu.sh/bbWNE/b3e6fb0b9e.zip

dws123 wrote:

Well that makes sense, since your even numbers don't have dots so your sliders at even numbers wont have dots.
If you want sliders at even numbers to have dots then put the dots in even numbers .png
Normal hitcircles and sliders have the same set of numbering soo...

Quiesce wrote:

Your taiko-drum image sizes should be 90x200 (180x400 @2x), otherwise alignment issues will hate you.

Ayatori wrote:

Currently combining a lot of elements and editing them from some of my favorite skins, but I came upon this when I changed the HP bar:



How do I get rid of that strange element at the end of the HP bar? What's the filename? Thanks in advance.

Narrill wrote:

Anyone know if the target practice targets are skinnable?

Violent Rime wrote:

Narrill wrote:

Anyone know if the target practice targets are skinnable?

yes and the name of file is "selection-mod-target".


Anyway i have a question here:
> "@2x"??? what is this??
> is taiko font (taiko.ttf) still work?
> How to change the big circle in the main menu osu!
> Can i move my score-0~9, combo counter, and skip button to the front scorebar-bg?

Chaoslitz wrote:

@2x is size double from the original one, which is for HD skinning
nope the osu!menu can not be skinned now
You can't move that I think ._.

Violent Rime wrote:

Chaoslitz wrote:

@2x is size double from the original one, which is for HD skinning
nope the osu!menu can not be skinned now
You can't move that I think ._.

oh i see, well how about taiko font?

Chaoslitz wrote:

If you mean this one
then yes it still can use

Violent Rime wrote:

Narrill wrote:

Anyone know if the target practice targets are skinnable?

yes and the name of file is "selection-mod-target".

bosmen5 wrote:

ktoś wie może czemu mi dźwięki prawidłowo nie działają ?
mam wgrane rożne dźwięki ale jak jednego brakuje (mam własne) to ten jeden co go brak, jest oryginalny z osu
i sie dzieje tak że jak gram to te dźwięki się same w sobie mieszają .-.
czyli nie są stałe i ten jeden dźwięk robi tak że np, on jest pod normal hit, potem się miesza i idzie pod slider , potem pod spinera...
wkurza to
poza tym, świetnie się robi skiny ale dźwięki denerowją strasznie .-.
ktoś ma jakąś rade to tego ?

SPOILER

deadbeat wrote:

oh right, not sure if you all know about this yet, but i'd suggest reading this blog, covers some mania.ini stuff http://smgi.me/?p=170
might find it helpful :3

deadbeat wrote:

oh right, not sure if you all know about this yet, but i'd suggest reading this blog, covers some mania.ini stuff http://smgi.me/?p=170
might find it helpful :3

IA42 wrote:

can anyone tell me where to get this ranking letter?

Lust69400 wrote:

Hey guys,

Apologize for my english, its not my native language at all, thanks.

I started a previous thread yesterday about my problem > you can find it there : t/243809

I'm using a skin that i do really enjoy, but there's no numbers on the hitcircles and as a beginner i get in troubles when it's the time for some weird square patterns. I did try to follow the answer made by ClothCurtain, but it seems i'm doing it wrong.

I did open the right files into my photo editor (e.g gimp) and i tried an absolute basic move to make the numbers appear.

The result is ... :

Wich is not what i was looking for.. at all .

I have no knowledge about gfx things or even drawing...

Anyone may help me realise it ? (advices or some try)

Lust69400 wrote:

Hey guys,

Apologize for my english, its not my native language at all, thanks.

I started a previous thread yesterday about my problem > you can find it there : t/243809

I'm using a skin that i do really enjoy, but there's no numbers on the hitcircles and as a beginner i get in troubles when it's the time for some weird square patterns. I did try to follow the answer made by ClothCurtain, but it seems i'm doing it wrong.

I did open the right files into my photo editor (e.g gimp) and i tried an absolute basic move to make the numbers appear.

The result is ... :

Wich is not what i was looking for.. at all .

I have no knowledge about gfx things or even drawing...

Anyone may help me realise it ? (advices or some try)

Lust69400 wrote:

HitCircleOverlayAboveNumber: 0

Serendipity wrote:

Ok thanks i'll try it !

Edit :

Seems it's not working or i did it wrong. I used Photoshop, Ctrl N new image 150x150, then Image>transparency. Saving and replacing the file as hitcircleoverlay.png in the osu!skin/skinname folder.



RESULT >

It gives me this ... :



its like it removed the other circles (those u can find usually on the sliders begin > end) and not the white square.

Here are the only files that i have used (the ones with a blue star icon) :



Do i have to use the other hitcircle images (the ones i ve put into the red square) ?


I want the skin to look like the original with the numbers. :

bokufizi wrote:

i know the simple way... you just writing number on the top blank layer on photoshop... and save as *.png and rename it as default- 1 default-2 default-3 --> default-9 you can also change the number font... oh you must make the size of canvas fit with size of hitcircle... it will easier if you have template from other skin default number... so you not have to resized again and again...

Frostei wrote:

You do realize that it's already fixed, right?

bokufizi wrote:

Serendipity wrote:

Ok thanks i'll try it !

i know the simple way... you just writing number on the top blank layer on photoshop... and save as *.png and rename it as default- 1 default-2 default-3 --> default-9 you can also change the number font... oh you must make the size of canvas fit with size of hitcircle... it will easier if you have template from other skin default number... so you not have to resized again and again...

Serendipity wrote:

Thanks mate but this problem got solved already so i dont have to learn photoshop (yeahhhhhhh )

wejder wrote:

How to convert HD skin into regular?

[Colours]
Combo1: R,G,B
Combo2: R,G,B

dorothy3242 wrote:

How do I change the glow color that appears when completing a spinner? I've tried changing the spinner-glow.png color to match the rest of my skin as a test, but the glow is still the same blue color? Was spinner-glow.png for something else? Is there a different image that's related to the blue glow?

EDIT: I'm dumb, so apparently it recolors whatever I have as the spinner-glow.png to blue and flashes to the original color. Is there any way to make it not color to blue?

dorothy3242 wrote:

Another problem

for some reason, the numbers and dots and commas are all anchoring at the top? This started when I went through and recolored the numbers a little. It was fine before.

dws123 wrote:

dorothy3242 wrote:

Another problem

for some reason, the numbers and dots and commas are all anchoring at the top? This started when I went through and recolored the numbers a little. It was fine before.

I think that's actually default
that's why the comma .png file has that space above it

dorothy3242 wrote:

dws123 wrote:

I think that's actually default
that's why the comma .png file has that space above it

I've gotten it fixed now, thanks!
Now to wait for the epiphany where I figure out how to change spinner glow tint

ReddScorn wrote:

To your long awaited answer regarding spinner-glow: You can't. It will always be tinted blue. No options for that.

ReddScorn wrote:

To your long awaited answer regarding spinner-glow: You can't. It will always be tinted blue. No options for that.

manjumochi wrote:

Unfortunately, I'd like to have a option to disable tint in skin.ini or, at least, can change color or type of tint (in future versions). For now, this limits a lot creation of new skins, imo.

dorothy3242 wrote:

I think this would be a great feature since the current set up of being always tinted blue kind of limits options of making it match the color scheme of the rest of the skin and discourages custom new style spinners. Something like
SpinnerGlowTint: 0/1 or SpinnerGlowTint: 255,255,0 maybe would be a nice addition.

OsuMe65 wrote:

I bet you should try to request that @ 4

OsuMe65 wrote:

He used a wide image width and standard height for that image.

ReddScorn wrote:

Well, it never works on small combo chains. Build up some larger combo chains like 30+ and after that it should be played. Otherwise you made it very quiet so it hardly gets noticed during play.

deadbeat wrote:

can someone quickly provide a list of the file names for the version 2 spinner set?

1. spinner-approachcircle
2. spinner-bottom
3. spinner-middle (spinner-middle2)
4. spinner-top
5. spinner-glow
6. spinner-spin
7. spinner-osu
8. spinner-clear
9. spinner-rpm

deadbeat wrote:

thanks <3
also what are the 3 cursor files. cursor, cursortrail and cursormiddle?

deadbeat wrote:

https://osu.ppy.sh/wiki/Skinning#Skin_Sets any issue with this new list so far
-mania is missing i know
-some elements such as followpoint are missing as well. dunno how to organize some things :<