where?
forum
Skinning tutorial (+ skinning support)
posted
Total Posts
4,226
Is there a limit to how long the applause sound file is? If not then what is the recommended length for it?
I don't believe there is a limit but I can't say for certain. I've used a 20 second sound file before as an applause sound and it works. The common length for most is around 10 seconds or less.a1l2d3r4e5d6 wrote:
Is there a limit to how long the applause sound file is? If not then what is the recommended length for it?
Ok. Thank you. This has given me a general idea of how long it should be.SAOnline wrote:
I don't believe there is a limit but I can't say for certain. I've used a 20 second sound file before as an applause sound and it works. The common length for most is around 10 seconds or less.a1l2d3r4e5d6 wrote:
Is there a limit to how long the applause sound file is? If not then what is the recommended length for it?
You misspelled it.-Troke- wrote:
mania-stage-right didn't work
It can't be animated afaik. Only mania-stage-bottom can be animated.OsuMe65 wrote:
You misspelled it.-Troke- wrote:
mania-stage-right didn't work
oh, it's only mania-stage-bottom ??ReddScorn wrote:
It can't be animated afaik. Only mania-stage-bottom can be animated.
i dont know that
Does anyone know if the osu! theme music can be skinned?
Hey guys! Quick question regarding hitnotes.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
In you skn.ini file search for "HitCircleOverlayAboveNumber: 1" and change the 1 to a 0, or add that line if it is not in it.NoClue wrote:
Hey guys! Quick question regarding hitnotes.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
That line changes the numbers to be on top of the overlay instead of behind.
Oh ho! Thank you very much. Didn't think that you could change the layering order of things.ReddScorn wrote:
In you skn.ini file search for "HitCircleOverlayAboveNumber: 1" and change the 1 to a 0, or add that line if it is not in it.NoClue wrote:
Hey guys! Quick question regarding hitnotes.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
That line changes the numbers to be on top of the overlay instead of behind.
IA42
So it's not my problem, i can't find it too ;w;
How can I make my slider ball, http://i.imgur.com/wY47rb7.png , change according to combo colour? Yes I have the option set in Osu!.
My skin is Dashie's skin. My skin is private. My skin public today in poland page! (http/www.chomikuj.pl). My info skin. XD
i hear any update about nK.ini being deprecated,
and some skin addition, could anyone list to me, which thing that got changed recently from 27 november (public release only)? by PMing me ofc
and some skin addition, could anyone list to me, which thing that got changed recently from 27 november (public release only)? by PMing me ofc
J'aimerais savoir comment on peut rendre les slider tous de la meme couleur?
hey guys, http://www.youtube.com/watch?v=p3zGzSiYdkM any1 have this hitsounds?
Hi,
I'm currently working on my own skin. And I wanted to ask if someone could tell me how to adjust the numbers for my hitcircles, so they won't be placed next to each other once they reach 10.
Gritoit did it in his skin but I have no Idea how(he didn't just use the Hitcircle itself or the Hitcircleoverlay nor changed anything in the skin.ini).
I can just place his "default-.png" files in my skin-folder and it works. But I want to use my own files.
I'm sorry if this question has already been answered a lot of times but I didn't really know how to search for it.
I'm currently working on my own skin. And I wanted to ask if someone could tell me how to adjust the numbers for my hitcircles, so they won't be placed next to each other once they reach 10.
Gritoit did it in his skin but I have no Idea how(he didn't just use the Hitcircle itself or the Hitcircleoverlay nor changed anything in the skin.ini).
I can just place his "default-.png" files in my skin-folder and it works. But I want to use my own files.
I'm sorry if this question has already been answered a lot of times but I didn't really know how to search for it.
IA42
-Go to your skin folder and open file skin.ini with notepad (or any text editor) then search "HitCircleOverlap: 1"Maeno-san wrote:
Hi,
I'm currently working on my own skin. And I wanted to ask if someone could tell me how to adjust the numbers for my hitcircles, so they won't be placed next to each other once they reach 10.
Gritoit did it in his skin but I have no Idea how(he didn't just use the Hitcircle itself or the Hitcircleoverlay nor changed anything in the skin.ini).
I can just place his "default-.png" files in my skin-folder and it works. But I want to use my own files.
I'm sorry if this question has already been answered a lot of times but I didn't really know how to search for it.
- Adjust the value from "1" to "155", in my skin.ini is "155" because the pixel is 128x128 but i dunno with other skin maybe you can try adjust this by yourself
IT WORKED
Had to set it to 100, I guess because my png's size was 100x100.
Thanks a lot for the help!
Had to set it to 100, I guess because my png's size was 100x100.
Thanks a lot for the help!
[/color][/color]I wonder why a nuke,
Fixed Icon
Fixed Icon
http://puu.sh/8vnhx.jpg I want to obtain the background in this image, and I have the image but where would I need to put it?
as shown in rrtyui's livestream. I checked the skin tutorial and it only explains what a playfield is and nothing about changing the back ground on the playfield.
sorry if it is obvious, but I have found nothing.
as shown in rrtyui's livestream. I checked the skin tutorial and it only explains what a playfield is and nothing about changing the back ground on the playfield.
sorry if it is obvious, but I have found nothing.
I've designed my own inputoverlay itself. It is supposed to be purple, and pressed it must be purple (press decreases). But I have a problem. If you press the button, it turns red. How do I do that away? 
" [smoogipooo] Allow ARGB and RGB colours in skins. "
i Half understand this, A rgb is Alpha R g b, but i can do something special with it ? like Transparent color ??
i Half understand this, A rgb is Alpha R g b, but i can do something special with it ? like Transparent color ??
What is the name for CtB comboburst? I can't remember that filename, you should put it in the wiki for reference.
It follows the same format as the combobursts for standard, just with "-fruits-" between the comboburst and number
comboburst-fruits-0.png
comboburst-fruits-1.png
and so on.
comboburst-fruits-0.png
comboburst-fruits-1.png
and so on.
i kind of want to completely redo the skinning portion of wiki, but not sure how to do it yetGarygoh884 wrote:
you should put it in the wiki for reference.
Redo it again? D:deadbeat wrote:
i kind of want to completely redo the skinning portion of wiki, but not sure how to do it yet
that is the plan. but i'm not sure how i want to go about it. i'm thinking of having a central hub and have it link off to different pages that go over the skin elements. which would mean 6 pages.
-hub
-standard
-taiko
-catch the beat
-mania
-skin.ini
-hub
-standard
-taiko
-catch the beat
-mania
-skin.ini
How can I change the menu BGM that you hear if you have the option ticked?
That makes me very sad it would be really cool if we could
it would be really cool if we couldOk so, i use IIDX MANIA 1.0 skin as my osu!mania skin. Due to recent skinning changes the background is now trasparent instead of black and the notes are smaller
How can i switch t the old (good) one?
How can i switch t the old (good) one?
These lines would be the ones to look out for.
ColumnWidth seems to be changed to real pixel width.
Colours are in RGBA where A controls the transparency of a lane. 0 is transparent and 255 is solid.
EDIT:about the notes, seems something is broken as I only see small lines. nvm after restarting worked fine again.
ColumnWidth: 50,50,50,50,50,50,50
Colour#: x,x,x,255 (# is for the specific lane)
ColumnWidth seems to be changed to real pixel width.
Colours are in RGBA where A controls the transparency of a lane. 0 is transparent and 255 is solid.
EDIT:
How do you make the follow point look like a line? Would you just make a lined shape follow point, or is this the animated follow point? If so then how would you go about in making it?
example:
example:
For test i am using
volume-bg@2x
http://gyazo.com/a7550a14934c06028dd9a7b06abda5de
volume-bg-effect@2x
http://gyazo.com/bd63616ddc0eee130b803eaa13ba4143
but i get this
http://gyazo.com/411a1be813372b288faea8a42b682c41
I am using the effect filename wrong ?
i used this page for reference https://osu.ppy.sh/wiki/Skinning
volume-bg@2x
http://gyazo.com/a7550a14934c06028dd9a7b06abda5de
volume-bg-effect@2x
http://gyazo.com/bd63616ddc0eee130b803eaa13ba4143
but i get this
http://gyazo.com/411a1be813372b288faea8a42b682c41
I am using the effect filename wrong ?
i used this page for reference https://osu.ppy.sh/wiki/Skinning
the file name is correct and I assume you already play in HD.
volume-bg-effect is not an overlay to show the volume level, it is the background when you change the volume level of sound effects manually like you would adjust the normal volume during or between plays.
This can be done by holding down the "Alt"-button while changing the volume with the mousewheel or arrowkeys. This is where volume-bg-effect shows up.
volume-bg-effect is not an overlay to show the volume level, it is the background when you change the volume level of sound effects manually like you would adjust the normal volume during or between plays.
This can be done by holding down the "Alt"-button while changing the volume with the mousewheel or arrowkeys. This is where volume-bg-effect shows up.
You have several followpoint image files, from 0 to 9 (I think), the length of the followpoint is determined by the number of those files that are not blank (the 5th file is the center of the "followline"). Just get a skin that has line followpoints and see for yourself how they should look like. The file name should be "followpoint-x.png", replace x by a number.a1l2d3r4e5d6 wrote:
How do you make the follow point look like a line? Would you just make a lined shape follow point, or is this the animated follow point? If so then how would you go about in making it?
example:
Ah I see... thank you for the help.
hello! i'm making a taiko skin but i encountered a problem, approach circle on standart and taiko mode aren't diferent files, on taiko mode it looks just fine, but in standart mode it looks so weird lol. i want standart to be different is there any way to fix it? thanks
is there any way to fix it? thanksYou can make a skin for taiko only and have this approachcircle there. Just make a folder named "taiko" put your taiko elements there and go to the options ingame. go to the skin section there and enable "use taiko skin for taiko mode". Everytime you play taiko this taiko skin will automatically be used, regardless of your skin. On your skin for standard you will use another approachcircle of course.
got it, thank you very much
I actually don't know does the picture that used for skins are R-15 or R-18
ok guys, this page is now updated. https://osu.ppy.sh/wiki/Skin.ini
HUGE thanks to smoogipooo for providing me with a template skin.ini with most of the //comments already attached :3
HUGE thanks to smoogipooo for providing me with a template skin.ini with most of the //comments already attached :3
little problem with spinner
hey everyone,
Since the new Osu, i've been having problems with my CtB skin. the "Character" won't change.
It's named:
- fruit-catcher-fail.png,
- fruit-catcher-fail@2x.png,
- fruit-catcher-idle.png,
- fruit-catcher-idle@2x.png,
- fruit-catcher-kiai.png
- fruit-catcher-kiai@2x.png
these were working on the old Osu! but now i have the one from the original osu! skin.
any ideas?
thx alot
Since the new Osu, i've been having problems with my CtB skin. the "Character" won't change.
It's named:
- fruit-catcher-fail.png,
- fruit-catcher-fail@2x.png,
- fruit-catcher-idle.png,
- fruit-catcher-idle@2x.png,
- fruit-catcher-kiai.png
- fruit-catcher-kiai@2x.png
these were working on the old Osu! but now i have the one from the original osu! skin.
any ideas?
thx alot
Change the Version in the skin.ini to
Version: 2.3
This is happening with the new update. How can I fix?
[General]
Version: 2.4
Try this. If fails, edit manually
score-comma.png can be used for accuracy if the decimal point comma (,) is used for specific languages. score-dot.png will be used otherwise.Telerator wrote:
is score-comma.png used anywhere in the game?
hi,
I'm having some issues with my hitcircleoverlay at the moment. For a while now, I've been using hitcirlceoverlay-0.png to effectively have an overlay only at the beginning of a slider. This has been working fine until I changed the image.
This is what it looks like currently, but the only thing that was different previously was the lack of the inner light-blue portion.
And this is the result in-game. It still works fine on hitcircles, but the sliders' overlay is entirely gone.
I'd have to assume that it has something to do with the middle of an overlay having to be transparent, but I still don't really get why it wouldn't work. Thanks in advance if you can help explain this to me.
I'm having some issues with my hitcircleoverlay at the moment. For a while now, I've been using hitcirlceoverlay-0.png to effectively have an overlay only at the beginning of a slider. This has been working fine until I changed the image.
This is what it looks like currently, but the only thing that was different previously was the lack of the inner light-blue portion.
And this is the result in-game. It still works fine on hitcircles, but the sliders' overlay is entirely gone.
I'd have to assume that it has something to do with the middle of an overlay having to be transparent, but I still don't really get why it wouldn't work. Thanks in advance if you can help explain this to me.
The overlay-0 method only works with "HitCircleOverlayAboveNumber: 1" in the skin.ini file, so that means you have to use a transparent middlepart in the overlay to see the number.
Uncheck "Hit Lightning" in the options? or replace lighting.png with a blank *.png file...[ Emerick ] wrote:
How do I stop colored sparks from appearing when I hit notes?
if you meant the whole effect itself:
1. Follow Rio-
2. make particle50/100/300 blank as well
1. Follow Rio-
2. make particle50/100/300 blank as well
I think he means star2.png, just make a a 1*1 blank image.
reversearrow is already static. The twitching behavior is a staple behavior of osu!. Can't avoid that.
http://speedy.sh/d2YKw/Nexus.rar
Since yesterday (or 2 days ago) 4k mania skin is broken- the rightmost column is a few pixels spaced from the border. I use 1280x1024 fullscreen res. I was told it's caused by latest skin.ini format change. Could someone change the ini in the archive so it works correctly, please?
Since yesterday (or 2 days ago) 4k mania skin is broken- the rightmost column is a few pixels spaced from the border. I use 1280x1024 fullscreen res. I was told it's caused by latest skin.ini format change. Could someone change the ini in the archive so it works correctly, please?
How do I adjust the skin for the new countdown?
Rise_old_1
Hey, urm I want my Combo Colour to be black but then it turns my approach circle to be black also. This makes it hard to see the approach circle on maps with dark backgrounds. Is there any way to get around this while still keeping the combo color black.
Thank you in advance.
Thank you in advance.
Use a black hitcircleoverlay (and SliderTrackOverride: 0,0,0 in the skin.ini too if you want the sliders to be black as well)
IA42
There's no way to adjust this now, Please follow this --> t/270736 or this t/269825Timorisu wrote:
Is there any way to adjust MenuGlow now?
New countdown is auto adjust to centered in your screen, but if you wanna old count down add thisAndRay2014 wrote:
How do I adjust the skin for the new countdown?
Version: 1.0to your skin.ini file under [general] section
I don't get itRise wrote:
I noticed in some old osu!standard gameplay that the Hitcircle's / Hitcircleoverlay's used to expand more (and decay slower) is there any way I can get that effect now or maybe use an older version (I assume that's not gonna work anyways).
you mean this -->
Rise_old_1
I don't get itRise wrote:
I noticed in some old osu!standard gameplay that the Hitcircle's / Hitcircleoverlay's used to expand more (and decay slower) is there any way I can get that effect now or maybe use an older version (I assume that's not gonna work anyways).
you mean this -->The after-effect of clicking the hitcircle's was expanded more and decayed slower, as showed ^ (old video)
That will change all combo colors to be black, I just want one combo to be black and one to be green, but for the black combos the hit circle is turned black which is difficult to see the hit circle on dark maps. The problem isn't really making the combo is black, it is the fact OSU is turning my hit circle black also xDinverness wrote:
Use a black hitcircleoverlay (and SliderTrackOverride: 0,0,0 in the skin.ini too if you want the sliders to be black as well)
Also another question; Is there a maximum amount of combobursts for a skin? I tried to do three but it only uses 2 throughout the map, how should I be naming them?
There is no limit to combobursts. You start naming them like in an animation like comboburst-0.png, comboburst-1.png, comboburst-2.png, etc.
They always appear on set combo counts; starting at 30, then 60, followed by 100 and everytime after 50 more combo. To make all appear more frequently just add ComboBurstRandom: 1 to your skin.ini file under the [General] section of it.
They always appear on set combo counts; starting at 30, then 60, followed by 100 and everytime after 50 more combo. To make all appear more frequently just add ComboBurstRandom: 1 to your skin.ini file under the [General] section of it.
ReddScorn wrote:
There is no limit to combobursts. You start naming them like in an animation like comboburst-0.png, comboburst-1.png, comboburst-2.png, etc.
They always appear on set combo counts; starting at 30, then 60, followed by 100 and everytime after 50 more combo. To make all appear more frequently just add ComboBurstRandom: 1 to your skin.ini file under the [General] section of it.
Also in the OP there is a "s" in combobursts-2.png, Im guessing that is just a typo?
EDIT: OOps, I named it comburst-3.png rather than 2, which must've been the mistake
i want to make mania-key bottoms with halo， it‘s hideen while no press bottom （like this 
-
but when i change the Hitposition（i want to make it higher then before） →
①LN thorugh mania-stage-hint ②we can see mania-stage-light below in my bottom。。。QAQ
-
-
then，i made bottom’s BG dark，but →
mania-key2D is hiddened by mania-key1， and the same to others。。。when i press other key，they will hidd each other。。。PAP
-
Unless。。Make it like this。。。
but i think it ugly。。
-
-
-
FOR HELP。。（can we make Layer-priority of mania-stage-hint Higher than light & note？
（sorry _idk whether there is a similar post in forums。。becuz of my poor English
-
but when i change the Hitposition（i want to make it higher then before） →
①LN thorugh mania-stage-hint ②we can see mania-stage-light below in my bottom。。。QAQ
-
-
then，i made bottom’s BG dark，but →
mania-key2D is hiddened by mania-key1， and the same to others。。。when i press other key，they will hidd each other。。。PAP
-
Unless。。Make it like this。。。
-
-
-
FOR HELP。。（can we make Layer-priority of mania-stage-hint Higher than light & note？
（sorry _idk whether there is a similar post in forums。。becuz of my poor English
Check every element to ensure size consistency. If one is oversized, edit it manually
**mania
i tried to change the Combo/ScorePosition but it isn't working. (I tried both nK.ini and skins.ini but the problem still occurs.)
any solution for this?
i tried to change the Combo/ScorePosition but it isn't working. (I tried both nK.ini and skins.ini but the problem still occurs.)
any solution for this?
You'll have to change these values in your skin.ini; values from your nK.ini files are no longer readable by osu!. Make sure you reload your skin (CTRL-ALT-SHIFT-S) after saving your skin.ini and ensure it has the correct syntax.[FX] AEM wrote:
**mania
i tried to change the Combo/ScorePosition but it isn't working. (I tried both nK.ini and skins.ini but the problem still occurs.)
any solution for this?
Reverce arrow not static. In my skin she pulsatesOsuMe65 wrote:
reversearrow is already static. The twitching behavior is a staple behavior of osu!. Can't avoid that.
IT'S. A. STAPLE. BEHAVIOR. just deal with it. ( O-o)b
Soz Hun I ain't reading that.
There are new mania key counts now. 1K,2K,3K,9K and 10K.
if you're making skins with mania, please take this into consideration and don't forget to add them
Ever since I started playing, I've always played without followpoints. Now I decided to try them, because I thought it might help me with airman. The problem is sometimes the followpoints appear in reverse, coming from the other direction. I use a line followpoint, so this really throws me off and makes me unable to play. I'd really like to try followpoints to see if it makes any difference, but as it is right now it's nigh impossible.
Why does my skin behave this way? What can I do to fix it?
Why does my skin behave this way? What can I do to fix it?
I don't know if any of you know this but you can use count.wav in place of count1s.wav, count2s.wav, count3.wav, and gos.wav.
readys.wav will play normally followed by count.wav being played 4 times.
This will only work if count3s.wav is absent.
The biggest use for this would be for silencing countdowns where you only have to mute 2 files instead of 5.
readys.wav will play normally followed by count.wav being played 4 times.
This will only work if count3s.wav is absent.
The biggest use for this would be for silencing countdowns where you only have to mute 2 files instead of 5.
Editing [x]k.ini dont work
any solution for this?
any solution for this?
IA42
Open your skin.ini file, find section "[mania]" if you can't find it just wrote it :3 then edit it to like you wantBlackCobra89 wrote:
Editing [x]k.ini dont work
any solution for this?
For more info you can go here and move to mania section :3 --> https://osu.ppy.sh/wiki/Skin.ini
Thx it workedIA42 wrote:
Open your skin.ini file, find section "[mania]" if you can't find it just wrote it :3 then edit it to like you wantBlackCobra89 wrote:
Editing [x]k.ini dont work
any solution for this?
For more info you can go here and move to mania section :3 --> https://osu.ppy.sh/wiki/Skin.ini
You mean they originate at the next note and travel to the current note, or the sprite appears in reverse? I honestly don't understand how the former could ever happen.Haiiro wrote:
The problem is sometimes the followpoints appear in reverse, coming from the other direction. I use a line followpoint, so this really throws me off and makes me unable to play.
Hi! I've been modifying default skin little to make it more the one which I personally like. I have just been wondering is there any way to make sliderfollowcircle to not "bounce", "throb", "beat" or "pulsate"? So that it would just say still. Just little thing which I would personally prefer more. I hope someone of you can give me answer fot this. Thanks!
Hello, for some reason my scorebar bg and color ar not aligning properly. Also my spinner elements are not working (spinner-top, etc...). The default spinner always shows up instead. My skin is on ver 2.2. Can anyone tell me what I am doing wrong?
Screenshots:
Screenshots:
Delete Spinner-Background.png?AlecJumps wrote:
Hello, for some reason my scorebar bg and color ar not aligning properly. Also my spinner elements are not working (spinner-top, etc...). The default spinner always shows up instead. My skin is on ver 2.2. Can anyone tell me what I am doing wrong?
Screenshots:
Delete scorebar-marker.pngAlecJumps wrote:
Thanks, I just need to figure out how to fix the scorebar