how can i upscale an image?
forum
Image Scaler
posted
Total Posts
86
Topic Starter
You should be able to just enter a value for the scaling factor that is greater than 1.0. If that doesn't work for some reason, please let me know.Kuzuga wrote:
how can i upscale an image?
That being said, usually upscaling an image doesn't really get you more quality or anything just more pixels. If you want to upscale an image and get a good result you're better off using something that tries to guess what a larger version of the image would've looked like such as https://github.com/nagadomi/waifu2x
Topic Starter
Nice!Xenos_2064 wrote:
It finally works!
Thank you!
I wasn't aware that something was previously broken though
ty so much and sorry late respondCorne2Plum3 wrote:
This is especially for guys who create skins. Normally, the skinner created some HD elements (@2x files) and this program create normal files with the standard resolution (without @2x).MattTheMysthYt wrote:
can someone tell how to use it
If you use this to do the thing I talked about in the previous paragraph, you need just in 'Input Folder' put you skin folder and press Start, the program is already configured to do that
Hey there, ur program sounds cool, will this help out like lag caused by the skins? and also how do I use it?
Look up.LameO3000 wrote:
Hey there, ur program sounds cool, will this help out like lag caused by the skins? and also how do I use it?
Corne2Plum3 wrote:
This is especially for guys who create skins. Normally, the skinner created some HD elements (@2x files) and this program create normal files with the standard resolution (without @2x).MattTheMysthYt wrote:
can someone tell how to use it
If you use this to do the thing I talked about in the previous paragraph, you need just in 'Input Folder' put you skin folder and press Start, the program is already configured to do that
Topic Starter
I hope that TTChaos' answer addressed the usage part of your question. As for whether it will help out with lag caused by skins. I would assume that it does not, this program is a tool for skinners to use when making a skin to make it easier to make SD elements, if you already have a completed skin there's not really a need to run this program. And there's not really a significant different performance wise when it comes to images created manually and images generated by this program.LameO3000 wrote:
Hey there, ur program sounds cool, will this help out like lag caused by the skins? and also how do I use it?
@ 2x has been added to all file names. Can this option be turned off? Do you have to delete all yourself (^ ～ ^;) ゞ
EDIT: One of the files has been changed by the program from .png to .psd.
Some files are double - one with @ 2x and the other not, as I am supposed to understand the ones without are the unscaled ones
EDIT: One of the files has been changed by the program from .png to .psd.
Some files are double - one with @ 2x and the other not, as I am supposed to understand the ones without are the unscaled ones
wow it's working thankyou dude
Topic Starter
If you are running with default settings then no names will get @2x added to them and no extensions will be changed either. The idea is that you run this on a skin with HD elements (@2x files) and then SD elements will be generated automatically (files without @2x) and that's what the default settings are configured to do. I'm not quite sure how you got some of the results you're describing, so if you have detailed steps to reproduce them I'd be interested.dawwideq wrote:
@ 2x has been added to all file names. Can this option be turned off? Do you have to delete all yourself (^ ～ ^;) ゞ
EDIT: One of the files has been changed by the program from .png to .psd.
Some files are double - one with @ 2x and the other not, as I am supposed to understand the ones without are the unscaled ones
Technically yes, but note that upscaling an image only gets you more resolution not quality. If you want to upscale an image and increase its quality you may want to take a look at waifu2x.YesRythm wrote:
does it work on standard to @2x
You're welcomepithau wrote:
wow it's working thankyou dude
Hey, i have a question abut this program
¿How i can Downscale images with this progam?
¿How i can Downscale images with this progam?
Topic Starter
You can set the scaling factor in the GUI, this is the number that the dimensions of the input images will be multiplied with to create the output image. So a number below 1 means images get downscaled, a number equal to 1 means the output becomes the same as the input and a number greater than 1 mean the images get upscaled.JakeBlade2017 wrote:
Hey, i have a question abut this program
¿How i can Downscale images with this progam?
Hello! I know this is an old thread but this solution worked and thank you! I can definitely use this program not only for osu! but for other things as well when it comes to images.
Topic Starter
I'm glad it is useful to youBukoPie wrote:
Hello! I know this is an old thread but this solution worked and thank you! I can definitely use this program not only for osu! but for other things as well when it comes to images.
svtzx
Could you do it for me? I tried, and didn't work.. https://skins.osuck.net/index.php?newsid=1107 (CK version)
what error are you getting? Just simply saying it doesn't work and expect people to do the task for you ain't it.xzintocatgirls wrote:
Could you do it for me? I tried, and didn't work.. https://skins.osuck.net/index.php?newsid=1107 (CK version)
If you're really confused how it works, all you have to do is insert the file location for both input and output folder at the top - you can relocate the output folder by unchecking the "write to input folder".
If you did try but still no avail, I think your images are located in a new file. Try searching something like "Not applicable, input is a file" outside the program.
If you did try but still no avail, I think your images are located in a new file. Try searching something like "Not applicable, input is a file" outside the program.
this is very helpful, thank you
Topic Starter
ThanksNasiGaPakeNasi wrote:
this is very helpful, thank you
Imma ask if this program will exist in android? I rlly need it xD
Topic Starter
I currently do not have any plans (or time) to port the program to Android. This would be quite a lot of work, so unless it becomes a common request I probably won't do it. Honestly I didn't even know people made skins on their Android devices >_>ManJebs wrote:
Imma ask if this program will exist in android? I rlly need it xD
How do I make the picture 16;10 aspect ratio? or 1650x1050 resolution?
Topic Starter
If you have an existing picture with the correct aspect ratio you can just compute which factor you need to scale down by. If you do not have a picture with the correct aspect ratio you will need to first cut your image to the correct size with some image editing software.CrimsonKyle wrote:
How do I make the picture 16;10 aspect ratio? or 1650x1050 resolution?
Hii i had a trouble with my osu skin on mac due to the mod selection doesn't show the skin. So i was wondering can mac use this image scaler too?
Topic Starter
Hey, the program should run just fine on mac, specifically the Java Archive version and assuming you have Java installed. I'm not sure if it would solve the issue you're having with your skin though.EmelyKuro wrote:
Hii i had a trouble with my osu skin on mac due to the mod selection doesn't show the skin. So i was wondering can mac use this image scaler too?
Topic Starter
ThanksBluecord6411 wrote:
this works so well!!!!
stupid question, can i convert 16:9 skins to 16:10 with this? how to do it?
Topic Starter
You can't, this program is purely for batch image resizing so the aspect ratio will remain the same. It also wouldn't really be possible to automate changing the aspect ratio of a skin in many cases as you'd effectively need to create new content out of nothing (otherwise the images would need to stretched or cut).oozorasubaru1 wrote:
stupid question, can i convert 16:9 skins to 16:10 with this? how to do it?
can i get some tutorial?
i want to use it for HD to SD
i want to use it for HD to SD
Topic Starter
That's what the default settings are for, so all you need to do is set the input folder to the skin folder and optionally change the output folder if you want the SD files in a separate location. And then you just press 'Start' and wait for it to finish.GoodRacer900 wrote:
can i get some tutorial?
i want to use it for HD to SD
Очень полезная программа! Для тех ,у кого слабый пк:)
=====================================================
A very useful program! For those who have a weak PC:)
=====================================================
A very useful program! For those who have a weak PC:)
Roan wrote:
That's what the default settings are for, so all you need to do is set the input folder to the skin folder and optionally change the output folder if you want the SD files in a separate location. And then you just press 'Start' and wait for it to finish.GoodRacer900 wrote:
can i get some tutorial?
i want to use it for HD to SD
thanks
Topic Starter
ThanksKGB_RUSSIAN wrote:
Очень полезная программа! Для тех ,у кого слабый пк:)
=====================================================
A very useful program! For those who have a weak PC:)
No problemGoodRacer900 wrote:
thanks
Can you use this to make a skin from 1960x1080 to 2560 x 1080
coz my monitor is ultra wide :/
and can someone tell me how to do it if possible
coz my monitor is ultra wide :/
and can someone tell me how to do it if possible
No you can not, for that you need to edit the source files yourself. This program simply generates SD images from HD imagesFlying_Dino wrote:
Can you use this to make a skin from 1960x1080 to 2560 x 1080
coz my monitor is ultra wide :/
and can someone tell me how to do it if possible
It wont find any files to rescale! How do i fix this?
Topic Starter
You're going to have to be a bit more specific. Also note that by default it looks for image files than end in @2x in the folder you select as input.Daniel_osu wrote:
It wont find any files to rescale! How do i fix this?
Topic Starter
You're welcome and thank you for using itSF JBaoz wrote:
thank you so much, this is amazing...
Oh nice that's so cool
Topic Starter
ThanksStomiks wrote:
Oh nice that's so cool
Hii, I was wondering if the file had a virus as Microsoft SmartScreen seems to have detected that it might be a risk...
Topic Starter
Hi, basically SmartScreen is telling you the application is unsigned and therefore nothing is known about the publisher, making it untrusted. Which makes sense, since as far as Microsoft is concerned I'm just a random person they have no reason to trust. The normal way to make applications trusted by Microsoft is to buy extremely expensive signing certificates, but those would cost me hundreds of euros each year, which is not really something I can afford to do for a project that makes me no money.Juakitoxis wrote:
Hii, I was wondering if the file had a virus as Microsoft SmartScreen seems to have detected that it might be a risk...
So in the end the decision of trust lies with you, if you think I'm trustworthy you can hit "Run anyway", if not I understand that too. As long as you got the file from the official download page (this forum post or the official GitHub page), then there are no viruses. If you want some extra certainty of that you can upload the file to VirusTotal, e.g., see https://www.virustotal.com/gui/file/c006d19649063ffe41d7dd174e5b0412da9690b6d0839e6e7b1c6d5f8e9a584c.
GRACIAS AMIGO ME AYUDASTE MUCHO. YA ME ESTABA VOLVIENDO LOCO CON LA SKIN BUGEADA