I can't do this, because my note contains two elementsinverness wrote:
p/3423744Hinei wrote:
How to make sliders without note in the end?
forum
Skinning tutorial (+ skinning support)
posted
Total Posts
4,226
I've been trying to fix this for a while with no solution.
The number 0 and 7 seem to be scaled smaller than the rest of the numbers which makes the score look odd. I've tried resizing the dimensions of the files, but it didn't seem to affect it. Oddly it's fine on a 1600x900 monitor, but happens when I use my 1366x768 monitor. Any help?
The number 0 and 7 seem to be scaled smaller than the rest of the numbers which makes the score look odd. I've tried resizing the dimensions of the files, but it didn't seem to affect it. Oddly it's fine on a 1600x900 monitor, but happens when I use my 1366x768 monitor. Any help?
Topic Starter
Some of them have @2x after name aka they are in HD.-Mo- wrote:
I've been trying to fix this for a while with no solution.
The number 0 and 7 seem to be scaled smaller than the rest of the numbers which makes the score look odd. I've tried resizing the dimensions of the files, but it didn't seem to affect it. Oddly it's fine on a 1600x900 monitor, but happens when I use my 1366x768 monitor. Any help?
HD is activated when you are using resolution with height higher than 800px or when you force it in your osu!.<username>.cfg
-Mo- wrote:
I've been trying to fix this for a while with no solution.
The number 0 and 7 seem to be scaled smaller than the rest of the numbers which makes the score look odd. I've tried resizing the dimensions of the files, but it didn't seem to affect it. Oddly it's fine on a 1600x900 monitor, but happens when I use my 1366x768 monitor. Any help?
Some of your numbers have HD version, but haven't SD, and when u use SD resolution - they cant turn into SD
I have both SD and HD versions. Removing one or the other has even worst effects.
Topic Starter
Hmmm... weird. Are you sure they have correct size? For example SD is 90x90 and HD should be 180x180. and make sure that all numbers have same height.
Can you upload them so I can see them?
Can you upload them so I can see them?
They are all the same height as eachother. They are also the same width with the exception for 1. They're not the square dimensions as you mentioned, however.MLGnom wrote:
Hmmm... weird. Are you sure they have correct size? For example SD is 90x90 and HD should be 180x180. and make sure that all numbers have same height.
Can you upload them so I can see them?
Download for just the numbers.
Edit: Actually, I might've found the problem. I think they were just badly scaled when they were put into SD mode.
Edit 2: Yep, fixed it. I just redid them from the HD versions. Sorry for the inconvinience.
Is it possible that the keys of mania were shown on the graphic key ? If someone does not understand me what I mean (most of people ) , I add a link(s)
https://osu.ppy.sh/ss/2209550 <-- There are shown keys that are used to play mania, only at begin of map.
https://osu.ppy.sh/ss/2209556 <-- when map is starting, they dissapear...
And... i want them shown always... Can someone help me?
/sorry for bad english ;c
https://osu.ppy.sh/ss/2209550 <-- There are shown keys that are used to play mania, only at begin of map.
https://osu.ppy.sh/ss/2209556 <-- when map is starting, they dissapear...
And... i want them shown always... Can someone help me?
/sorry for bad english ;c
DeletedUser_4041880
Is there a way to modify the drag sound? It's played when dragging the opacity up/down or any slider in options.
The name of the file is "sliderbar.wav". The original sound is played at the lowest value, and the higher is the option value, the more high pitched is the sound. You can also use a .mp3 instead of a .wav. You can find a full list of the customizable sounds here.TFguy wrote:
Is there a way to modify the drag sound? It's played when dragging the opacity up/down or any slider in options.
Thank you! I just find it plain annoying so it's an empty file now :3koopa712 wrote:
The name of the file is "sliderbar.wav". The original sound is played at the lowest value, and the higher is the option value, the more high pitched is the sound. You can also use a .mp3 instead of a .wav. You can find a full list of the customizable sounds here.
Does anyone know where I can find the triangle tile wallpaper/texture used in the new osu!elements (such as the store)? I would like to use it for my skin.
Seen here: http://store.ppy.sh/store/listing
EDIT: I found something by going into the page source, and then browsing the CSS at http://store.ppy.sh/style/compiled.css?1401015814. Apparently the source file can be found at http://store.ppy.sh/images/layout/background.svg, as seen here: http://imgur.com/sVRhxcY.
But, is this the best version I can get? Is there a more complete source file?
Seen here: http://store.ppy.sh/store/listing
EDIT: I found something by going into the page source, and then browsing the CSS at http://store.ppy.sh/style/compiled.css?1401015814. Apparently the source file can be found at http://store.ppy.sh/images/layout/background.svg, as seen here: http://imgur.com/sVRhxcY.
But, is this the best version I can get? Is there a more complete source file?
What is the difference between using a 1x1 image and a blank transparent 256x256 image when you don't want certain element images shown in your skin?
256x256 or other sizes allow being clickable (like cr1m's skin style hitcircles if used in editor) or to be hovered over to show a hover box (ranking graph).
1x1 simply disables these functions and make them unclickable. It mostly depends on what element you want to hide. Some clicks or hovers might be important and prefer the larger dimensions.
1x1 simply disables these functions and make them unclickable. It mostly depends on what element you want to hide. Some clicks or hovers might be important and prefer the larger dimensions.
Is there any way to move or get rid of the accuracy chart? Holy crap is it placed badly, especially at more square resolutions.
oreNa_
Use Version: 1 in your skin.ini instead. And ofcourse it changes not only this but also the layout of ranking-panel, coloured warning arrow, etcIm Black wrote:
I don't understand how you make your countdown skin spread out, my countdown is stacking on top of each other instead of being to the left and right, please help.
1
2
3
I noticed that the maps without background don't use the playfield.png anymore
is there any way to change the blue background for those songs?
for example
also does anyone knows what size should be the playfield.png?
is there any way to change the blue background for those songs?
for example
also does anyone knows what size should be the playfield.png?
Playfield is no longer used anywhere but editor, the role got replaced by menu-backround.jpg instead. Regarding the dimensions, stick to the aspect ratio you're currently using (widescreen: 1366x768 or more, normal: 1024x768 or more)
Use invisible hitcircle, use invisible hitcircleoverlay (to hide the sliderend hitcircles), and use visible hitcircleoverlay-0 (for the hitcircleoverlay to appear in hitcircle and the start of sliders).
Clear me up when you don't understand
Clear me up when you don't understand
i have question...
if i use 1920 x 1080 screen resolution
did HD skin work? or the normal skin work?
if i use 1920 x 1080 screen resolution
did HD skin work? or the normal skin work?
Yes (unless you set LowResolution to 1 in osu!<computerusername>.cfg, it should work).2D girl lover wrote:
i have question...
if i use 1920 x 1080 screen resolution
did HD skin work? or the normal skin work?
41236 wrote:
Guys, when is playfield.png used?
inverness wrote:
Playfield is no longer used anywhere but editor, the role got replaced by menu-backround.jpg instead. Regarding the dimensions, stick to the aspect ratio you're currently using (widescreen: 1366x768 or more, normal: 1024x768 or more)
playfield.png is still used during gameplay of old ranked songs that don't have a background image o_OInori wrote:
41236 wrote:
Guys, when is playfield.png used?inverness wrote:
Playfield is no longer used anywhere but editor, the role got replaced by menu-backround.jpg instead. Regarding the dimensions, stick to the aspect ratio you're currently using (widescreen: 1366x768 or more, normal: 1024x768 or more)
for example Hit in the USA mapped by Shin looks like this on the song select screen:
and becomes this during gameplay:
Because that's what I have as my playfield.png
Kasie_old_1
It's a staple behavior. Making approach circle blank is a bad option. Leave it as is.
For some reason some of my elements get these itsy bitsy gross black pixels on the edges of them when displayed in osu:
even though they aren't there in my image files (white background added to make this easilly visible):
Does anybody know what I could do about this?
It doesn't happen to all of the elements so I was wondering if it had to do with compression settings or something strange like that?
Also-
even though they aren't there in my image files (white background added to make this easilly visible):
Does anybody know what I could do about this?
It doesn't happen to all of the elements so I was wondering if it had to do with compression settings or something strange like that?
Also-
I'm pretty sure Zeugmax is referring to how a hitcircle gets bigger and fades out after being clicked, though I have no clue if that can be changed.OsuMe65 wrote:
It's a staple behavior. Making approach circle blank is a bad option. Leave it as is.
I'm not sure of what he's referring to aswell, but the only fade in I know of is the approach circle I guess, and you should never play without them (unless with hidden). Maybe the lighting.png file? But that gives a fade out effect, not fade in.dorothy3242 wrote:
Also-I'm pretty sure Zeugmax is referring to how a hitcircle gets bigger and fades out after being clicked, though I have no clue if that can be changed.OsuMe65 wrote:
It's a staple behavior. Making approach circle blank is a bad option. Leave it as is.
Also I don't know what happened to your file dorothy, never happened to me, what resolution do you run your game in? Did you try changing it?
Side note: Since the last patches all my spinner backgrounds disappeared?? The file is in my skin folder, the game just doesn't recognize or load it for some reason.. (this happened in every skin with a spinner background) Did this happened to anyone else that can help me out?
I usually run it in 1366 x 768 (native) with fullscreen mode, but it happens no matter what resolution I use. It's less visible on lower resolutions because of the upscaled blurriness in fullscreen, but it's still there. Only with some elements that I've made does this happen, but no matter I can't seem to make it go away on the ranking letters.Milhofo wrote:
Also I don't know what happened to your file dorothy, never happened to me, what resolution do you run your game in? Did you try changing it?
AlecJumps wrote:
So, are the skin sounds not the same? Or are there no sounds?Nyanaro124 wrote:
So i want all my skin sounds to be the same, ive already changed each sound and kept the right names on everything, i have also turned on the skin sound sample setting but it does not work. I need help
Sorry this is really late.
But the skin sounds are not the same no. It is using the osu skin sounds.
Thanks for your contribution 
I am trying to get the whole hitcircle coloured the same as the inner ring, http://i.imgur.com/ogYCFzB.png I'm referring to the green inner part of the circle and it would be appreciated if someone could help. I worded that really awkwardly, but I hope you can understand. Essentialy, instead of the inside of the hitcircle being blank, give it the same transparent colour.
my skin can be downloaded here https://www.sendspace.com/file/fxxbzb (It's based off of Nara and uses elements from other skins for personal use). I'm trying to make mine more like the ones from phaze, http://i.imgur.com/gPDQ3sU.png - which has a subtle colour in the hitcircle
Actually, I just took the hitcircle (not overlay) from Phaze and added it to mine and the result was okay.
This?-Geo- wrote:
Hi guys, does anyone have the "sugoi desu" sound ? Thanks
I need help with the scorebar/health bar.
How do I line up the scorebar with the background of the scorebar?
How do I line up the scorebar with the background of the scorebar?
I usually use another skin as an example (open the elements of that skin and see their positioning), or just go by trial and error. Maybe there's a way more simple solution that I don't know of?Ruin Lance wrote:
I need help with the scorebar/health bar.
How do I line up the scorebar with the background of the scorebar?
K-F-C
I need some help with the scoreboard.
For awhile, I could use different elements for the playing field and the scoreboard (blank hit300-0.png, and a actual image for hit300.png), however, since one of the recent updates, the scoreboard seems to be using the hit300-0.png instead, displaying an empty space instead of an image. Anyone know how to fix this ?
For awhile, I could use different elements for the playing field and the scoreboard (blank hit300-0.png, and a actual image for hit300.png), however, since one of the recent updates, the scoreboard seems to be using the hit300-0.png instead, displaying an empty space instead of an image. Anyone know how to fix this ?
Rename your old hit300-0.png to hit300-1.png and rename a copy of hit300.png to hit300-0.png. Same goes for hit300g.pngK-F-C wrote:
I need some help with the scoreboard.
For awhile, I could use different elements for the playing field and the scoreboard (blank hit300-0.png, and a actual image for hit300.png), however, since one of the recent updates, the scoreboard seems to be using the hit300-0.png instead, displaying an empty space instead of an image. Anyone know how to fix this ?
The first animation frame gets shown on the ranking panel and not shown during gameplay due to the fixed animation speed. So no worries about it popping up.
Was wondering if anyone knew how to make the score pop up along the line for Osu!Mania and just have it be a line rather than numbers. http://puu.sh/d6L2i/98a22d2069.png
Hi,
I'm visually-impaired and I struggle with several elements in this game, but one in particular I'm having a real problem with is sliders. My eyesight isn't good enough to tell which end of the slider I should be aiming for, so I constantly break combo, or even completely fail, from going the wrong way over a slider. Is it possible to change the colour of the opposite end of the slider only? It seems skins use the hit circles for both ends of the slider, but I'd like to be able to distinguish between each end of the slider by using different colours. Reading through the tutorial, it doesn't seem as though this is possible. I'd be grateful for some advice here.
I'm visually-impaired and I struggle with several elements in this game, but one in particular I'm having a real problem with is sliders. My eyesight isn't good enough to tell which end of the slider I should be aiming for, so I constantly break combo, or even completely fail, from going the wrong way over a slider. Is it possible to change the colour of the opposite end of the slider only? It seems skins use the hit circles for both ends of the slider, but I'd like to be able to distinguish between each end of the slider by using different colours. Reading through the tutorial, it doesn't seem as though this is possible. I'd be grateful for some advice here.
Yeah, it's already on, and it helps for easier maps where the circles are quite close to each other, but whenever the jumps are a bit longer I never see the animation. Thanks for the reply.
oreNa_
make sure that you named combobursts as "comboburst" or "comboburst-0, comboburst-1, comboburst-2, and so on".Im Black wrote:
Can someone please help me? My combo burst characters aren't changing.
Does someone know how to fix this?
hi,can someone give me some hitsounds?like'pop','ting'sounds? 
sorry for bad grammer
sorry for bad grammer
https://osu.ppy.sh/u/lksjessicakaka wrote:
hi,can someone give me some hitsounds?like'pop','ting'sounds?
sorry for bad grammer
Download the hitsound pack from the userpage and search from it :3
i can't dl 'the hitsound pack
where?
Is there a limit to how long the applause sound file is? If not then what is the recommended length for it?
I don't believe there is a limit but I can't say for certain. I've used a 20 second sound file before as an applause sound and it works. The common length for most is around 10 seconds or less.a1l2d3r4e5d6 wrote:
Is there a limit to how long the applause sound file is? If not then what is the recommended length for it?
Ok. Thank you. This has given me a general idea of how long it should be.SAOnline wrote:
I don't believe there is a limit but I can't say for certain. I've used a 20 second sound file before as an applause sound and it works. The common length for most is around 10 seconds or less.a1l2d3r4e5d6 wrote:
Is there a limit to how long the applause sound file is? If not then what is the recommended length for it?
You misspelled it.-Troke- wrote:
mania-stage-right didn't work
It can't be animated afaik. Only mania-stage-bottom can be animated.OsuMe65 wrote:
You misspelled it.-Troke- wrote:
mania-stage-right didn't work
oh, it's only mania-stage-bottom ??ReddScorn wrote:
It can't be animated afaik. Only mania-stage-bottom can be animated.
i dont know that
Does anyone know if the osu! theme music can be skinned?
Hey guys! Quick question regarding hitnotes.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
In you skn.ini file search for "HitCircleOverlayAboveNumber: 1" and change the 1 to a 0, or add that line if it is not in it.NoClue wrote:
Hey guys! Quick question regarding hitnotes.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
That line changes the numbers to be on top of the overlay instead of behind.
Oh ho! Thank you very much. Didn't think that you could change the layering order of things.ReddScorn wrote:
In you skn.ini file search for "HitCircleOverlayAboveNumber: 1" and change the 1 to a 0, or add that line if it is not in it.NoClue wrote:
Hey guys! Quick question regarding hitnotes.
Is there any way at all to be able to have static coloring on a note?
For example: I wish to put a very small decal at the center of the note but can't get the proper effect for it because of how the hitnote layer is effected by the color change and that I wish for it to not change. I also can't apply the decal to the overlay because I've come to find out that the overlay file goes over the top of the numbers as well.
Kind of stuck but not sure if there's some sort of work around that I can use to achieve this.
That line changes the numbers to be on top of the overlay instead of behind.
IA42
So it's not my problem, i can't find it too ;w;
How can I make my slider ball, http://i.imgur.com/wY47rb7.png , change according to combo colour? Yes I have the option set in Osu!.
My skin is Dashie's skin. My skin is private. My skin public today in poland page! (http/www.chomikuj.pl). My info skin. XD
i hear any update about nK.ini being deprecated,
and some skin addition, could anyone list to me, which thing that got changed recently from 27 november (public release only)? by PMing me ofc
and some skin addition, could anyone list to me, which thing that got changed recently from 27 november (public release only)? by PMing me ofc
J'aimerais savoir comment on peut rendre les slider tous de la meme couleur?
hey guys, http://www.youtube.com/watch?v=p3zGzSiYdkM any1 have this hitsounds?
Hi,
I'm currently working on my own skin. And I wanted to ask if someone could tell me how to adjust the numbers for my hitcircles, so they won't be placed next to each other once they reach 10.
Gritoit did it in his skin but I have no Idea how(he didn't just use the Hitcircle itself or the Hitcircleoverlay nor changed anything in the skin.ini).
I can just place his "default-.png" files in my skin-folder and it works. But I want to use my own files.
I'm sorry if this question has already been answered a lot of times but I didn't really know how to search for it.
I'm currently working on my own skin. And I wanted to ask if someone could tell me how to adjust the numbers for my hitcircles, so they won't be placed next to each other once they reach 10.
Gritoit did it in his skin but I have no Idea how(he didn't just use the Hitcircle itself or the Hitcircleoverlay nor changed anything in the skin.ini).
I can just place his "default-.png" files in my skin-folder and it works. But I want to use my own files.
I'm sorry if this question has already been answered a lot of times but I didn't really know how to search for it.
IA42
-Go to your skin folder and open file skin.ini with notepad (or any text editor) then search "HitCircleOverlap: 1"Maeno-san wrote:
Hi,
I'm currently working on my own skin. And I wanted to ask if someone could tell me how to adjust the numbers for my hitcircles, so they won't be placed next to each other once they reach 10.
Gritoit did it in his skin but I have no Idea how(he didn't just use the Hitcircle itself or the Hitcircleoverlay nor changed anything in the skin.ini).
I can just place his "default-.png" files in my skin-folder and it works. But I want to use my own files.
I'm sorry if this question has already been answered a lot of times but I didn't really know how to search for it.
- Adjust the value from "1" to "155", in my skin.ini is "155" because the pixel is 128x128 but i dunno with other skin maybe you can try adjust this by yourself
IT WORKED
Had to set it to 100, I guess because my png's size was 100x100.
Thanks a lot for the help!
Had to set it to 100, I guess because my png's size was 100x100.
Thanks a lot for the help!
[/color][/color]I wonder why a nuke,
Fixed Icon
Fixed Icon
http://puu.sh/8vnhx.jpg I want to obtain the background in this image, and I have the image but where would I need to put it?
as shown in rrtyui's livestream. I checked the skin tutorial and it only explains what a playfield is and nothing about changing the back ground on the playfield.
sorry if it is obvious, but I have found nothing.
as shown in rrtyui's livestream. I checked the skin tutorial and it only explains what a playfield is and nothing about changing the back ground on the playfield.
sorry if it is obvious, but I have found nothing.
I've designed my own inputoverlay itself. It is supposed to be purple, and pressed it must be purple (press decreases). But I have a problem. If you press the button, it turns red. How do I do that away?
" [smoogipooo] Allow ARGB and RGB colours in skins. "
i Half understand this, A rgb is Alpha R g b, but i can do something special with it ? like Transparent color ??
i Half understand this, A rgb is Alpha R g b, but i can do something special with it ? like Transparent color ??
What is the name for CtB comboburst? I can't remember that filename, you should put it in the wiki for reference.
It follows the same format as the combobursts for standard, just with "-fruits-" between the comboburst and number
comboburst-fruits-0.png
comboburst-fruits-1.png
and so on.
comboburst-fruits-0.png
comboburst-fruits-1.png
and so on.
i kind of want to completely redo the skinning portion of wiki, but not sure how to do it yetGarygoh884 wrote:
you should put it in the wiki for reference.
Redo it again? D:deadbeat wrote:
i kind of want to completely redo the skinning portion of wiki, but not sure how to do it yet
that is the plan. but i'm not sure how i want to go about it. i'm thinking of having a central hub and have it link off to different pages that go over the skin elements. which would mean 6 pages.
-hub
-standard
-taiko
-catch the beat
-mania
-skin.ini
-hub
-standard
-taiko
-catch the beat
-mania
-skin.ini
How can I change the menu BGM that you hear if you have the option ticked?
That makes me very sad it would be really cool if we could
it would be really cool if we couldOk so, i use IIDX MANIA 1.0 skin as my osu!mania skin. Due to recent skinning changes the background is now trasparent instead of black and the notes are smaller
How can i switch t the old (good) one?
How can i switch t the old (good) one?
These lines would be the ones to look out for.
ColumnWidth seems to be changed to real pixel width.
Colours are in RGBA where A controls the transparency of a lane. 0 is transparent and 255 is solid.
EDIT:about the notes, seems something is broken as I only see small lines. nvm after restarting worked fine again.
ColumnWidth: 50,50,50,50,50,50,50
Colour#: x,x,x,255 (# is for the specific lane)
ColumnWidth seems to be changed to real pixel width.
Colours are in RGBA where A controls the transparency of a lane. 0 is transparent and 255 is solid.
EDIT:
How do you make the follow point look like a line? Would you just make a lined shape follow point, or is this the animated follow point? If so then how would you go about in making it?
example:
example:
For test i am using
volume-bg@2x
http://gyazo.com/a7550a14934c06028dd9a7b06abda5de
volume-bg-effect@2x
http://gyazo.com/bd63616ddc0eee130b803eaa13ba4143
but i get this
http://gyazo.com/411a1be813372b288faea8a42b682c41
I am using the effect filename wrong ?
i used this page for reference https://osu.ppy.sh/wiki/Skinning
volume-bg@2x
http://gyazo.com/a7550a14934c06028dd9a7b06abda5de
volume-bg-effect@2x
http://gyazo.com/bd63616ddc0eee130b803eaa13ba4143
but i get this
http://gyazo.com/411a1be813372b288faea8a42b682c41
I am using the effect filename wrong ?
i used this page for reference https://osu.ppy.sh/wiki/Skinning
the file name is correct and I assume you already play in HD.
volume-bg-effect is not an overlay to show the volume level, it is the background when you change the volume level of sound effects manually like you would adjust the normal volume during or between plays.
This can be done by holding down the "Alt"-button while changing the volume with the mousewheel or arrowkeys. This is where volume-bg-effect shows up.
volume-bg-effect is not an overlay to show the volume level, it is the background when you change the volume level of sound effects manually like you would adjust the normal volume during or between plays.
This can be done by holding down the "Alt"-button while changing the volume with the mousewheel or arrowkeys. This is where volume-bg-effect shows up.