- W i n t e r - wrote:

i get

X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 154 (GLX)
Minor opcode of failed request: 3 (X_GLXCreateContext)
Value in failed request: 0x0
Serial number of failed request: 403
Current serial number in output stream: 404

im on arch and idk how to fix it

Oceana wrote:

Is compatibility mode mandatory? I heard it has an impact on frames

Peoy wrote:

MarshNello wrote:

final result:

https://youtu.be/Ve4qr3jmDbM

A little introduction:

osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide (https://osu.ppy.sh/community/forums/topics/367783), which are probably the best methods even now. However, in my case both ended up in a broken installation, so I kept searching for ways to install osu! until I actually managed to run it perfectly thanks to some workarounds. It's a pretty easy guide, written especially for beginners (just like me xd), so if you want to install osu! on your Linux distro, just keep reading e.e

PREREQUISITES:
install the following: git, build-essential, dialog, curl.

- sudo apt install git
- sudo apt install build-essential
- sudo apt install dialog
- sudo apt install curl

install wine (the script will do it itself but it's better to have it):
https://wiki.winehq.org/Download

also make sure you installed proprietary drivers for your gpu if you need to
guide for it: https://itsfoss.com/install-additional-drivers-ubuntu/

GUIDE:

to set up our osu!, we'll use osu-install script from yurisuki (credits to him):
https://gitlab.com/yurisuki/osu-install

just follow the instructions here and install it: https://gitlab.com/yurisuki/osu-install#how-do-i-execute-this-script

once you start the script, just follow its instructions.
the script was supposed to do everything automatically, from installing osu! to the patch, but it actually crashes after installing osu! and running it. That's fine, because we'll only use it for the installation indeed.

the steps to make it work are:

- step 1: run it the first time, follow the script's instructions which will install everything but, in the part supposed to run osu!, it shouldn't start (if it starts, skip to step 3); so run the script again.

- step 2: follow the script's instructions again until it starts osu! (if you get "osu! crashed", just click on restart osu! and it should be working now.)

- step 3: the game is now working fine: close it, press whatever key you want on the terminal and the script should crash. that's fine, move on to step 4.

- step 4: run the script again for the last time and follow whatever it says, until it runs osu! again. When it starts, close the game and close the terminal by pressing any key.

our osu! is now completely set up and working fine, but we gotta apply thepoon's patch for latency and create a script to launch (or eventually, kill) the game.

LATENCY PATCH:

let's begin with the patch:

- open the terminal as root using sudo su
sudo su

- type:
mkdir -p /etc/pulse/daemon.conf.d/

echo "high-priority = yes
nice-level = -15

realtime-scheduling = yes
realtime-priority = 50

resample-method = speex-float-0

default-fragments = 2 # Minimum is 2
default-fragment-size-msec = 2 # You can set this to 1, but that will break OBS audio capture." | sudo tee -a /etc/pulse/daemon.conf.d/10-better-latency.conf

(WARNING: if after applying this the system's audio is garbage, increase default-fragment-size-msec by 2, save and reboot)

- then type:
nano /etc/security/limits.conf

- scroll to the bottom of the file and add:
echo "USERNAME - nice -20

USERNAME - rtprio 99" >> /etc/security/limits.conf

- replace USERNAME with your username, save the file with ctrl+o and exit with ctrl+x.

- now open /etc/pulse/default.pa with
nano -c /etc/pulse/default.pa

- here somewhere near lines 40/50 you should find this line:
load-module module-udev-detect

- once you find it, add tsched=0 to the end of it, so like this:
load-module module-udev-detect tsched=0

save the file again with ctrl+o and exit with ctrl+x.

the patch is now applied. reboot your pc to apply the changes and go on with the guide e.e

OSU LAUNCHER:

we're almost done! the last thing to do is create a script to start the game.
to do that:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/
(if z: isn't your drive here, just search for the right one)

- type this to create the osu script:
cat > osu << "EOF"

- now paste in the terminal the following (always replacing username with yours):

#!/bin/sh

export STAGING_AUDIO_DURATION=5000
export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wine /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/osu\!.exe "$@"
EOF

- in the end launch these two commands.
sudo mv osu /usr/bin/
sudo chmod +x /usr/bin/osu

you can now launch your osu! by typing "osu" in the terminal!
to create a script to kill osu!, just in case it won't launch for any reason, let's do this:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/

- type this to create the osukill script:
cat > osukill << "EOF"

- now paste in the terminal the following:

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wineserver -k
EOF

- in the end launch again these two commands.
sudo mv osukill /usr/bin/
sudo chmod +x /usr/bin/osukill

you can now kill osu by typing osukill in the terminal when you need to

END
And that's it! Your osu! should now work perfectly fine!
Last but not least: you can also create a desktop shortcut for it, by left clicking on your desktop and selecting "create a launcher". It should look like this:



Well, that's the end of the guide! Thanks for reading, and have fun playing osu! on your linux <33

This is the maximum performance I got even using that configuration, Spec (2gb ram, 1.35ghz cpu, no graphic card)(Lubuntu 20.04 lts)

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

sudo apt-get update
sudo apt-get install libc6 build-essential

sudo apt-get upgrade

MarshNello wrote:

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

Assuming you're using Ubuntu (or anything Debian-based) you might fix installing these:

sudo apt-get update
sudo apt-get install libc6 build-essential

If it still doesn't work, you might just have to upgrade your system:

sudo apt-get upgrade

leny wrote:

MarshNello wrote:

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

Assuming you're using Ubuntu (or anything Debian-based) you might fix installing these:

sudo apt-get update
sudo apt-get install libc6 build-essential

If it still doesn't work, you might just have to upgrade your system:

sudo apt-get upgrade

Sadly did not do the trick (for me) but thanks for help

- sylvie - wrote:

Heya. I have stuff working pretty alright but there are still slight frame drops, and most notably, the framerate is capped at 144hz. How do I remedy this stuff. I am on Fedora 35 (wayland and pipewire lol)

K a r b o X wrote:

hey, i have a huge problem, i could not solve this, trying since last week (not jk). i can't start osu, it says "osu! was unable to obtain a graphics context. If this is the fisrt time you've seen this, please try restarting your PC." it is not the first time happening and idk what to do. When i click on "OK", osu pops up with "osu! crashed" telling that "OpenGL could not initialize.". I did every step of the instalation, wine, osu-wine, etc.

Following error.

#=zXgkpUpGWooUUAiSeA$2PQINAAvLf: No available GL context found. ---> OpenTK.Graphics.GraphicsContextException: Failed to initialize EGL, error NOT_INITIALIZED.
at OpenTK.Platform.Egl.EglWindowInfo..ctor(IntPtr handle, IntPtr display, IntPtr surface)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateWindowInfo(IAngleWindowInfoInternal window_info, Int32 major, GraphicsContextFlags flags)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateGLContext(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Boolean directRendering, Int32 major, Int32 minor, GraphicsContextFlags flags)
at OpenTK.Graphics.GraphicsContext..ctor(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Int32 major, Int32 minor, GraphicsContextFlags flags)
at #=zpDGDyz8NOUCZMTHvJseFwYRM_vID.#=zvP5cQlU=(Int32 #=zHaeeObY=, Int32 #=zE7$2IB4=, GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
--- End of inner exception stack trace ---
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.OnHandleCreated(EventArgs #=zFfm4ggA=)
at #=zLbmb8cFB3iFDJ6H8xbwAg313TvKd.OnHandleCreated(EventArgs #=zFfm4ggA=)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmCreate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at #=z6cA5tJtDC3Zha7QqOkNVjTQ=.WndProc(Message& #=zkhmiKZw=)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Specs.

CPU:
⠀Architecture: x86_64
⠀⠀CPU op-mode(s): 32-bit, 64-bit
⠀⠀Address sizes: 39 bits physical, 48 bits virtual
⠀⠀Byte Order: Little Endian
⠀CPU(s): 4
⠀⠀On-line CPU(s) list: 0-3
⠀Vendor ID: GenuineIntel
⠀⠀BIOS Vendor ID: Intel(R) Corporation
⠀⠀Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀BIOS Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀CPU family: 6
⠀⠀⠀Model: 78
⠀⠀⠀Thread(s) per core: 2
⠀⠀⠀Core(s) per socket: 2
⠀⠀⠀Socket(s): 1
⠀⠀⠀Stepping: 3
⠀⠀⠀CPU max MHz: 2000.0000
⠀⠀⠀CPU min MHz: 400.0000
⠀⠀⠀BogoMIPS: 3999.93
⠀Virtualization features:
⠀⠀Virtualization: VT-x
⠀Caches (sum of all):
⠀⠀L1d: 64 KiB (2 instances)
⠀⠀L1i: 64 KiB (2 instances)
⠀⠀L2: 512 KiB (2 instances)
⠀⠀L3: 3 MiB (1 instance)

Distro (ik its bad):
⠀No LSB modules are available.
⠀Distributor ID: Kali
⠀Description: Kali GNU/Linux Rolling
⠀Release: 2021.3
⠀Codename: kali-rolling

RAM: 4GB 2100Mhz
Disk: 120GB HD 79.09GB free (linux partition)

yes, i have "libgl" packages installed, and i found out some forum that says that i need gpu drivers but i don't find any Intel ones, yea. Because of my distro i don't want to install Ubuntu dependencies or Debian 9 ones, and i can't install "wine32", because when i try to install, says i need to remove every single package that i already have, including xserver, xfce, Xorg, burpsuite, etc. (not kidding tho, everything). i tried doing it on a virtual machine and that sh*t crashed and gdm3 and Xorg don't work anymore, even installing it after. my distro uses Debian Sid packages for those who don't know, any packages from Debian 9+ might work tho. i gave up because i don't want to crash anything in my computer and deal with bigger problems, if anyone have a solution that might work that don't work with too much danger, im down. im not used to write in english, sorry for any english mistakes. and yes i live in brazil.

MarshNello wrote:

K a r b o X wrote:

hey, i have a huge problem, i could not solve this, trying since last week (not jk). i can't start osu, it says "osu! was unable to obtain a graphics context. If this is the fisrt time you've seen this, please try restarting your PC." it is not the first time happening and idk what to do. When i click on "OK", osu pops up with "osu! crashed" telling that "OpenGL could not initialize.". I did every step of the instalation, wine, osu-wine, etc.

Following error.

#=zXgkpUpGWooUUAiSeA$2PQINAAvLf: No available GL context found. ---> OpenTK.Graphics.GraphicsContextException: Failed to initialize EGL, error NOT_INITIALIZED.
at OpenTK.Platform.Egl.EglWindowInfo..ctor(IntPtr handle, IntPtr display, IntPtr surface)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateWindowInfo(IAngleWindowInfoInternal window_info, Int32 major, GraphicsContextFlags flags)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateGLContext(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Boolean directRendering, Int32 major, Int32 minor, GraphicsContextFlags flags)
at OpenTK.Graphics.GraphicsContext..ctor(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Int32 major, Int32 minor, GraphicsContextFlags flags)
at #=zpDGDyz8NOUCZMTHvJseFwYRM_vID.#=zvP5cQlU=(Int32 #=zHaeeObY=, Int32 #=zE7$2IB4=, GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
--- End of inner exception stack trace ---
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.OnHandleCreated(EventArgs #=zFfm4ggA=)
at #=zLbmb8cFB3iFDJ6H8xbwAg313TvKd.OnHandleCreated(EventArgs #=zFfm4ggA=)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmCreate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at #=z6cA5tJtDC3Zha7QqOkNVjTQ=.WndProc(Message& #=zkhmiKZw=)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Specs.

CPU:
⠀Architecture: x86_64
⠀⠀CPU op-mode(s): 32-bit, 64-bit
⠀⠀Address sizes: 39 bits physical, 48 bits virtual
⠀⠀Byte Order: Little Endian
⠀CPU(s): 4
⠀⠀On-line CPU(s) list: 0-3
⠀Vendor ID: GenuineIntel
⠀⠀BIOS Vendor ID: Intel(R) Corporation
⠀⠀Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀BIOS Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀CPU family: 6
⠀⠀⠀Model: 78
⠀⠀⠀Thread(s) per core: 2
⠀⠀⠀Core(s) per socket: 2
⠀⠀⠀Socket(s): 1
⠀⠀⠀Stepping: 3
⠀⠀⠀CPU max MHz: 2000.0000
⠀⠀⠀CPU min MHz: 400.0000
⠀⠀⠀BogoMIPS: 3999.93
⠀Virtualization features:
⠀⠀Virtualization: VT-x
⠀Caches (sum of all):
⠀⠀L1d: 64 KiB (2 instances)
⠀⠀L1i: 64 KiB (2 instances)
⠀⠀L2: 512 KiB (2 instances)
⠀⠀L3: 3 MiB (1 instance)

Distro (ik its bad):
⠀No LSB modules are available.
⠀Distributor ID: Kali
⠀Description: Kali GNU/Linux Rolling
⠀Release: 2021.3
⠀Codename: kali-rolling

RAM: 4GB 2100Mhz
Disk: 120GB HD 79.09GB free (linux partition)

yes, i have "libgl" packages installed, and i found out some forum that says that i need gpu drivers but i don't find any Intel ones, yea. Because of my distro i don't want to install Ubuntu dependencies or Debian 9 ones, and i can't install "wine32", because when i try to install, says i need to remove every single package that i already have, including xserver, xfce, Xorg, burpsuite, etc. (not kidding tho, everything). i tried doing it on a virtual machine and that sh*t crashed and gdm3 and Xorg don't work anymore, even installing it after. my distro uses Debian Sid packages for those who don't know, any packages from Debian 9+ might work tho. i gave up because i don't want to crash anything in my computer and deal with bigger problems, if anyone have a solution that might work that don't work with too much danger, im down. im not used to write in english, sorry for any english mistakes. and yes i live in brazil.

I've never really used Kali myself but you might try installing this (?) https://installlion.com/kali/kali/main/i/intel-gpu-tools/install/index.html

MarshNello wrote:

leny wrote:

MarshNello wrote:

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

Assuming you're using Ubuntu (or anything Debian-based) you might fix installing these:

sudo apt-get update
sudo apt-get install libc6 build-essential

If it still doesn't work, you might just have to upgrade your system:

sudo apt-get upgrade

Sadly did not do the trick (for me) but thanks for help

Update: check the troubleshooting box e.e

MarshNello wrote:

- sylvie - wrote:

Heya. I have stuff working pretty alright but there are still slight frame drops, and most notably, the framerate is capped at 144hz. How do I remedy this stuff. I am on Fedora 35 (wayland and pipewire lol)

Sooo first of all: I assume you have a 240hz monitor, but Wine should detect the same refresh rate of the system, so the issue might be your drivers or some dependency (?) I've never really used Wayland myself so xd

Try updating your drivers or installing all the Wine dependencies listed here:

Fedora dependencies

sudo dnf install alsa-plugins-pulseaudio.i686 glibc-devel.i686 glibc-devel libgcc.i686 libX11-devel.i686 freetype-devel.i686 libXcursor-devel.i686 libXi-devel.i686 libXext-devel.i686 libXxf86vm-devel.i686 libXrandr-devel.i686 libXinerama-devel.i686 mesa-libGLU-devel.i686 mesa-libOSMesa-devel.i686 libXrender-devel.i686 libpcap-devel.i686 ncurses-devel.i686 libzip-devel.i686 lcms2-devel.i686 zlib-devel.i686 libv4l-devel.i686 libgphoto2-devel.i686 cups-devel.i686 libxml2-devel.i686 openldap-devel.i686 libxslt-devel.i686 gnutls-devel.i686 libpng-devel.i686 flac-libs.i686 json-c.i686 libICE.i686 libSM.i686 libXtst.i686 libasyncns.i686 liberation-narrow-fonts.noarch libieee1284.i686 libogg.i686 libsndfile.i686 libuuid.i686 libva.i686 libvorbis.i686 libwayland-client.i686 libwayland-server.i686 llvm-libs.i686 mesa-dri-drivers.i686 mesa-filesystem.i686 mesa-libEGL.i686 mesa-libgbm.i686 nss-mdns.i686 ocl-icd.i686 pulseaudio-libs.i686 sane-backends-libs.i686 tcp_wrappers-libs.i686 unixODBC.i686 samba-common-tools.x86_64 samba-libs.x86_64 samba-winbind.x86_64 samba-winbind-clients.x86_64 samba-winbind-modules.x86_64 mesa-libGL-devel.i686 fontconfig-devel.i686 libXcomposite-devel.i686 libtiff-devel.i686 openal-soft-devel.i686 mesa-libOpenCL-devel.i686 opencl-utils-devel.i686 alsa-lib-devel.i686 gsm-devel.i686 libjpeg-turbo-devel.i686 pulseaudio-libs-devel.i686 pulseaudio-libs-devel gtk3-devel.i686 libattr-devel.i686 libva-devel.i686 libexif-devel.i686 libexif.i686 glib2-devel.i686 mpg123-devel.i686 mpg123-devel.x86_64 libcom_err-devel.i686 libcom_err-devel.x86_64 libFAudio-devel.i686 libFAudio-devel.x86_64
sudo dnf groupinstall "C Development Tools and Libraries"
sudo dnf groupinstall "Development Tools"

BoofMonke wrote:

Hi, i've recently installed osu and im using wine-staging because I've had better experience with that on this particular guide, but it seems my latency is all over the place. I've tried 0 universal offset, 25 and even -25. I've tried enabling and disabling compatibility mode, even using the pipewire settings in the Extra info section but it just doesnt seem right. Any idea how to fix it?

I'm running arch.

Also the tablet delay is unbearable even with the compositor disabled, any idea? OpenTabletDriver isn't the issue as it runs fine on the desktop.

MarshNello wrote:

Liang J wrote:

is there a way to move my songs from windows to Linux?, i tried to move it directly but the game dosent recognize it

you just need to paste your Windows' "Songs" folder to your Linux's osu! directory (which should be around here /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/)

after that just refresh your maps in osu! pressing F5 and you're good

Ashtrath wrote:

MarshNello wrote:

Liang J wrote:

is there a way to move my songs from windows to Linux?, i tried to move it directly but the game dosent recognize it

you just need to paste your Windows' "Songs" folder to your Linux's osu! directory (which should be around here /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/)

after that just refresh your maps in osu! pressing F5 and you're good

where i can find the .wine_osu folders i only have .wine folders, or its the same? its not on my home directory for some reason, im using arch if that matters.

also i dont have much resolution option compared to the windows one, like i don't have 720p resolution option.

spunout enjoyer wrote:

i was looking around to optimize games and i found gamemode. it really did smoothen my osu so i decided to share it with you.

1-) install gamemode:

arch

sudo pacman -S gamemode lib32-gamemode

ubuntu

sudo apt install gamemode

2-) use gamemoderun ./game (gamemoderun osu-wine in this case) if you are starting the game from terminal, if you are starting the game from .desktop file you need to add gamemoderun into command line like this.

------optional step for lutris games------
if you play your games on lutris you can enable this by default which can save you lot of time

steps

KatouMegumi wrote:

Gamemode may not help in some cases. It could make it worse too, so try it and see.

MarshNello wrote:

KatouMegumi wrote:

Gamemode may not help in some cases. It could make it worse too, so try it and see.

Really? I got better performance on like 3 pcs so I thought it was good xd
I'll add that to its section e.e

Kolmas wrote:

looks fps on wayland is locked to refresh rate of the screen, it's running fine on X11 tho
also it's probably my problem but idk why i can't get opentabletdriver to work unless using sudo

systemctl --user enable opentabletdriver --now

kotik0666 wrote:

Please make guide for VOID LINUX

[NekoToo] wrote:

This is sort of unrelated but would anyone know how to install opentabletdriver on fedora linux like compile it from source, I've never really compiled something from source so I don't know how to Edit: Another problem I have once switching to the osu wine specific one my osu doesn't load backgrounds for beatmaps or the menu is there a fix to this? I was reading a post somewhere else about this and it has something to do with libjpeg but I have the 32 and 64 bit ones installed

opentabletdriver

Example:

KatouMegumi wrote:

Ummm, uhh. You shouldn't be installing things into system folders by yourself. Your package manager is supposed to manage that.

[Teo] wrote:

hello
so i've followed the guide completely and osu has installed
thing is,when i try to open it,it launches the updater and then the osu logo but the game doesnt actually open
if i download a beatmap and open it,it'll actually open the game but the beatmap wont load
the beatmap thing is the only way i can actually open the game
any idea what might be up?
using ubuntu 20.04.3 lts

daud_ahn wrote:

I already followed all steps, including the "How to add osu! to Lutris", but after i played for around half an hour, osu! just closed itself without any error or anything. Im using linux mint 20.2
here's log file (taken from lutris) raw file:

Started initial process 2689 from gamemoderun /home/daud/.local/share/lutris/runners/wine/wine-osu/bin/wine /home/daud/.local/share/osu-wine/OSU/osu!.exe
Start monitoring process.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.

ERROR: Caught a segmentation fault while loading plugin file:
/usr/lib/i386-linux-gnu/gstreamer-1.0/libgstcdparanoia.so

Please either:
- remove it and restart.
- run with --gst-disable-segtrap --gst-disable-registry-fork and debug.
Monitored process exited.
No return code
Started initial process 3064 from gamemoderun /home/daud/.local/share/lutris/runners/wine/wine-osu/bin/wine /home/daud/.local/share/osu-wine/OSU/osu!.exe
Start monitoring process.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
winegstreamer error: decodebin0: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin0: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin0/GstDecodeBin:decodebin0:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
gamemodeauto: 
[4651:4651:1103/072734.031920:ERROR:sandbox_linux.cc(374)] InitializeSandbox() called with multiple threads in process gpu-process.
[4618:4618:1103/072734.682996:ERROR:CONSOLE(1)] "[Shields]: Can't request shields panel data for tabId: 6.  Error: No tab url specified", source: chrome-extension://mnojpmjdmbbfmejpflffifhffcmidifd/out/brave_extension_background.bundle.js (1)
[4618:4618:1103/072735.828714:ERROR:object_proxy.cc(642)] Failed to call method: org.freedesktop.ScreenSaver.GetActive: object_path= /org/freedesktop/ScreenSaver: org.freedesktop.DBus.Error.NotSupported: This method is not implemented
[4618:4636:1103/072736.554239:ERROR:chrome_browser_main_extra_parts_metrics.cc(230)] crbug.com/1216328: Checking Bluetooth availability started. Please report if there is no report that this ends.
[4618:4636:1103/072736.554261:ERROR:chrome_browser_main_extra_parts_metrics.cc(233)] crbug.com/1216328: Checking Bluetooth availability ended.
[4618:4636:1103/072736.554266:ERROR:chrome_browser_main_extra_parts_metrics.cc(236)] crbug.com/1216328: Checking default browser status started. Please report if there is no report that this ends.
[4618:4636:1103/072736.673561:ERROR:chrome_browser_main_extra_parts_metrics.cc(240)] crbug.com/1216328: Checking default browser status ended.
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0434
winegstreamer error: decodebin1: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin1: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin1/GstDecodeBin:decodebin1:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin2: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin2: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin2/GstDecodeBin:decodebin2:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin3: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin3: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin3/GstDecodeBin:decodebin3:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin4: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin4: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin4/GstDecodeBin:decodebin4:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin5: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin5: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin5/GstDecodeBin:decodebin5:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)


Unhandled Exception: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
   at System.Net.UnsafeNclNativeMethods.OSSOCK.select(Int32 ignoredParameter, IntPtr[] readfds, IntPtr[] writefds, IntPtr[] exceptfds, TimeValue& timeout)
   at System.Net.Sockets.Socket.Poll(Int32 microSeconds, SelectMode mode)
   at System.Net.Sockets.NetworkStream.PollRead()
   at System.Net.Connection.StartRequest(HttpWebRequest request, Boolean canPollRead)
   at System.Net.Connection.SubmitRequest(HttpWebRequest request, Boolean forcedsubmit)
   at System.Net.ServicePoint.SubmitRequest(HttpWebRequest request, String connName)
   at System.Net.HttpWebRequest.SubmitRequest(ServicePoint servicePoint)
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zd7QKC1139$z5()
   at (Object , Object[] )
   at ?.(MethodBase , Object , Object[] , Boolean )
   at ?.(MethodBase , Boolean )
   at ?. (? ,   )
   at ?.()
   at ?. (Boolean )
   at ?.(Object[] , Type[] , Type[] , Object[] )
   at A.B.(Object )
   at A.B.D(Object r)
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zhdRTaNI=()
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zwlIQxdGwXFZU()
   at #=z1xwc$0OuyrlnX$PgjPApPkg=.#=zsnO8BkE=(Boolean #=zmbzDALk=)
   at #=z1xwc$0OuyrlnX$PgjPApPkg=.#=zbTAJMZA=()
   at #=zexquLa$9eI26S91OZw==.#=zDt5ZZEKsSG3Knhilg_q8qDs=.#=z7vDPpGS9$IbwNZaUDeH5pBk=()
   at #=ziIiH1t7Xxp3S_zsZe4Q4VUrQSbdq.#=zb34v$wqcz4Q0uelx3YQ$8AI=.#=zzLYRibA0YbWNEbIoVg==(Object #=zuMRmxV_bF6tQ)
   at #=z1PWF9Oop5EoyTGWXxdZwqu8=.#=z7n8r6Aex9t4P()
   at #=z1PWF9Oop5EoyTGWXxdZwqu8=.#=zHC1U5wY=()
   at #=zluTOhkpZPoQZ_FbbbJx1Mhk=.#=z7n8r6Aex9t4P(#=z1PWF9Oop5EoyTGWXxdZwqu8= #=z8MKEQu8=)
   at #=zluTOhkpZPoQZ_FbbbJx1Mhk=.#=z1BPg7YA0dqOQ()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
Monitored process exited.
Initial process has exited (return code: 1280)
Exit with return code 1280

Doxxz wrote:

daud_ahn wrote:

I already followed all steps, including the "How to add osu! to Lutris", but after i played for around half an hour, osu! just closed itself without any error or anything. Im using linux mint 20.2
here's log file (taken from lutris) raw file:

Started initial process 2689 from gamemoderun /home/daud/.local/share/lutris/runners/wine/wine-osu/bin/wine /home/daud/.local/share/osu-wine/OSU/osu!.exe
Start monitoring process.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.

ERROR: Caught a segmentation fault while loading plugin file:
/usr/lib/i386-linux-gnu/gstreamer-1.0/libgstcdparanoia.so

Please either:
- remove it and restart.
- run with --gst-disable-segtrap --gst-disable-registry-fork and debug.
Monitored process exited.
No return code
Started initial process 3064 from gamemoderun /home/daud/.local/share/lutris/runners/wine/wine-osu/bin/wine /home/daud/.local/share/osu-wine/OSU/osu!.exe
Start monitoring process.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
winegstreamer error: decodebin0: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin0: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin0/GstDecodeBin:decodebin0:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
gamemodeauto: 
[4651:4651:1103/072734.031920:ERROR:sandbox_linux.cc(374)] InitializeSandbox() called with multiple threads in process gpu-process.
[4618:4618:1103/072734.682996:ERROR:CONSOLE(1)] "[Shields]: Can't request shields panel data for tabId: 6.  Error: No tab url specified", source: chrome-extension://mnojpmjdmbbfmejpflffifhffcmidifd/out/brave_extension_background.bundle.js (1)
[4618:4618:1103/072735.828714:ERROR:object_proxy.cc(642)] Failed to call method: org.freedesktop.ScreenSaver.GetActive: object_path= /org/freedesktop/ScreenSaver: org.freedesktop.DBus.Error.NotSupported: This method is not implemented
[4618:4636:1103/072736.554239:ERROR:chrome_browser_main_extra_parts_metrics.cc(230)] crbug.com/1216328: Checking Bluetooth availability started. Please report if there is no report that this ends.
[4618:4636:1103/072736.554261:ERROR:chrome_browser_main_extra_parts_metrics.cc(233)] crbug.com/1216328: Checking Bluetooth availability ended.
[4618:4636:1103/072736.554266:ERROR:chrome_browser_main_extra_parts_metrics.cc(236)] crbug.com/1216328: Checking default browser status started. Please report if there is no report that this ends.
[4618:4636:1103/072736.673561:ERROR:chrome_browser_main_extra_parts_metrics.cc(240)] crbug.com/1216328: Checking default browser status ended.
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0434
winegstreamer error: decodebin1: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin1: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin1/GstDecodeBin:decodebin1:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin2: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin2: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin2/GstDecodeBin:decodebin2:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin3: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin3: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin3/GstDecodeBin:decodebin3:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin4: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin4: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin4/GstDecodeBin:decodebin4:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin5: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin5: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin5/GstDecodeBin:decodebin5:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)


Unhandled Exception: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
   at System.Net.UnsafeNclNativeMethods.OSSOCK.select(Int32 ignoredParameter, IntPtr[] readfds, IntPtr[] writefds, IntPtr[] exceptfds, TimeValue& timeout)
   at System.Net.Sockets.Socket.Poll(Int32 microSeconds, SelectMode mode)
   at System.Net.Sockets.NetworkStream.PollRead()
   at System.Net.Connection.StartRequest(HttpWebRequest request, Boolean canPollRead)
   at System.Net.Connection.SubmitRequest(HttpWebRequest request, Boolean forcedsubmit)
   at System.Net.ServicePoint.SubmitRequest(HttpWebRequest request, String connName)
   at System.Net.HttpWebRequest.SubmitRequest(ServicePoint servicePoint)
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zd7QKC1139$z5()
   at (Object , Object[] )
   at ?.(MethodBase , Object , Object[] , Boolean )
   at ?.(MethodBase , Boolean )
   at ?. (? ,   )
   at ?.()
   at ?. (Boolean )
   at ?.(Object[] , Type[] , Type[] , Object[] )
   at A.B.(Object )
   at A.B.D(Object r)
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zhdRTaNI=()
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zwlIQxdGwXFZU()
   at #=z1xwc$0OuyrlnX$PgjPApPkg=.#=zsnO8BkE=(Boolean #=zmbzDALk=)
   at #=z1xwc$0OuyrlnX$PgjPApPkg=.#=zbTAJMZA=()
   at #=zexquLa$9eI26S91OZw==.#=zDt5ZZEKsSG3Knhilg_q8qDs=.#=z7vDPpGS9$IbwNZaUDeH5pBk=()
   at #=ziIiH1t7Xxp3S_zsZe4Q4VUrQSbdq.#=zb34v$wqcz4Q0uelx3YQ$8AI=.#=zzLYRibA0YbWNEbIoVg==(Object #=zuMRmxV_bF6tQ)
   at #=z1PWF9Oop5EoyTGWXxdZwqu8=.#=z7n8r6Aex9t4P()
   at #=z1PWF9Oop5EoyTGWXxdZwqu8=.#=zHC1U5wY=()
   at #=zluTOhkpZPoQZ_FbbbJx1Mhk=.#=z7n8r6Aex9t4P(#=z1PWF9Oop5EoyTGWXxdZwqu8= #=z8MKEQu8=)
   at #=zluTOhkpZPoQZ_FbbbJx1Mhk=.#=z1BPg7YA0dqOQ()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
Monitored process exited.
Initial process has exited (return code: 1280)
Exit with return code 1280

Have you managed to find a solution for this crash? I also keep getting these System.AccessViolationException crashes and i've tried everything to fix it. Tried a bunch of different combinations of wine versions and windows versions on winecfg, installed all lib32 gstreamer plugins and also many other libs, reinstalled osu following a bunch of different guides (including this one), changed audio driver from pulseaudio to pipewire, etc etc. But no matter what i do this crash always comes back to haunt me. Can't wait for osu!lazer.

daud_ahn wrote:

apparently they don't even intend to support Linux with lazer either, so things may also break and probably no one will fix it

Doxxz wrote:

daud_ahn wrote:

I already followed all steps, including the "How to add osu! to Lutris", but after i played for around half an hour, osu! just closed itself without any error or anything. Im using linux mint 20.2
here's log file (taken from lutris) raw file:

Started initial process 2689 from gamemoderun /home/daud/.local/share/lutris/runners/wine/wine-osu/bin/wine /home/daud/.local/share/osu-wine/OSU/osu!.exe
Start monitoring process.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.

ERROR: Caught a segmentation fault while loading plugin file:
/usr/lib/i386-linux-gnu/gstreamer-1.0/libgstcdparanoia.so

Please either:
- remove it and restart.
- run with --gst-disable-segtrap --gst-disable-registry-fork and debug.
Monitored process exited.
No return code
Started initial process 3064 from gamemoderun /home/daud/.local/share/lutris/runners/wine/wine-osu/bin/wine /home/daud/.local/share/osu-wine/OSU/osu!.exe
Start monitoring process.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
winegstreamer error: decodebin0: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin0: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin0/GstDecodeBin:decodebin0:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
gamemodeauto: 
[4651:4651:1103/072734.031920:ERROR:sandbox_linux.cc(374)] InitializeSandbox() called with multiple threads in process gpu-process.
[4618:4618:1103/072734.682996:ERROR:CONSOLE(1)] "[Shields]: Can't request shields panel data for tabId: 6.  Error: No tab url specified", source: chrome-extension://mnojpmjdmbbfmejpflffifhffcmidifd/out/brave_extension_background.bundle.js (1)
[4618:4618:1103/072735.828714:ERROR:object_proxy.cc(642)] Failed to call method: org.freedesktop.ScreenSaver.GetActive: object_path= /org/freedesktop/ScreenSaver: org.freedesktop.DBus.Error.NotSupported: This method is not implemented
[4618:4636:1103/072736.554239:ERROR:chrome_browser_main_extra_parts_metrics.cc(230)] crbug.com/1216328: Checking Bluetooth availability started. Please report if there is no report that this ends.
[4618:4636:1103/072736.554261:ERROR:chrome_browser_main_extra_parts_metrics.cc(233)] crbug.com/1216328: Checking Bluetooth availability ended.
[4618:4636:1103/072736.554266:ERROR:chrome_browser_main_extra_parts_metrics.cc(236)] crbug.com/1216328: Checking default browser status started. Please report if there is no report that this ends.
[4618:4636:1103/072736.673561:ERROR:chrome_browser_main_extra_parts_metrics.cc(240)] crbug.com/1216328: Checking default browser status ended.
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0434
winegstreamer error: decodebin1: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin1: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin1/GstDecodeBin:decodebin1:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin2: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin2: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin2/GstDecodeBin:decodebin2:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin3: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin3: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin3/GstDecodeBin:decodebin3:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin4: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin4: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin4/GstDecodeBin:decodebin4:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)

winegstreamer error: decodebin5: Your GStreamer installation is missing a plug-in.
winegstreamer error: decodebin5: gstdecodebin2.c(4678): gst_decode_bin_expose (): /GstBin:bin5/GstDecodeBin:decodebin5:
no suitable plugins found:
Missing decoder: MS GSM (audio/ms-gsm, rate=(int)44100, channels=(int)1, codec_data=(buffer)4001)


Unhandled Exception: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
   at System.Net.UnsafeNclNativeMethods.OSSOCK.select(Int32 ignoredParameter, IntPtr[] readfds, IntPtr[] writefds, IntPtr[] exceptfds, TimeValue& timeout)
   at System.Net.Sockets.Socket.Poll(Int32 microSeconds, SelectMode mode)
   at System.Net.Sockets.NetworkStream.PollRead()
   at System.Net.Connection.StartRequest(HttpWebRequest request, Boolean canPollRead)
   at System.Net.Connection.SubmitRequest(HttpWebRequest request, Boolean forcedsubmit)
   at System.Net.ServicePoint.SubmitRequest(HttpWebRequest request, String connName)
   at System.Net.HttpWebRequest.SubmitRequest(ServicePoint servicePoint)
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zd7QKC1139$z5()
   at (Object , Object[] )
   at ?.(MethodBase , Object , Object[] , Boolean )
   at ?.(MethodBase , Boolean )
   at ?. (? ,   )
   at ?.()
   at ?. (Boolean )
   at ?.(Object[] , Type[] , Type[] , Object[] )
   at A.B.(Object )
   at A.B.D(Object r)
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zhdRTaNI=()
   at #=zucjbFxG7BXNPooH9t0M6FZc=.#=zwlIQxdGwXFZU()
   at #=z1xwc$0OuyrlnX$PgjPApPkg=.#=zsnO8BkE=(Boolean #=zmbzDALk=)
   at #=z1xwc$0OuyrlnX$PgjPApPkg=.#=zbTAJMZA=()
   at #=zexquLa$9eI26S91OZw==.#=zDt5ZZEKsSG3Knhilg_q8qDs=.#=z7vDPpGS9$IbwNZaUDeH5pBk=()
   at #=ziIiH1t7Xxp3S_zsZe4Q4VUrQSbdq.#=zb34v$wqcz4Q0uelx3YQ$8AI=.#=zzLYRibA0YbWNEbIoVg==(Object #=zuMRmxV_bF6tQ)
   at #=z1PWF9Oop5EoyTGWXxdZwqu8=.#=z7n8r6Aex9t4P()
   at #=z1PWF9Oop5EoyTGWXxdZwqu8=.#=zHC1U5wY=()
   at #=zluTOhkpZPoQZ_FbbbJx1Mhk=.#=z7n8r6Aex9t4P(#=z1PWF9Oop5EoyTGWXxdZwqu8= #=z8MKEQu8=)
   at #=zluTOhkpZPoQZ_FbbbJx1Mhk=.#=z1BPg7YA0dqOQ()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
Monitored process exited.
Initial process has exited (return code: 1280)
Exit with return code 1280

Have you managed to find a solution for this crash? I also keep getting these System.AccessViolationException crashes and i've tried everything to fix it. Tried a bunch of different combinations of wine versions and windows versions on winecfg, installed all lib32 gstreamer plugins and also many other libs, reinstalled osu following a bunch of different guides (including this one), changed audio driver from pulseaudio to pipewire, etc etc. But no matter what i do this crash always comes back to haunt me. Can't wait for osu!lazer.

MarshNello wrote:

Well this is a known issue yeah

Doxxz wrote:

MarshNello wrote:

Well this is a known issue yeah

daud_ahn was the singular person i had ever seen talking about this issue, thought it was a rare bug. Is it actually common?

KatouMegumi wrote:

PSA: If you use pipewire, don't update to 0.3.41 yet or use self built version from git.

MarshNello wrote:

KatouMegumi wrote:

PSA: If you use pipewire, don't update to 0.3.41 yet or use self built version from git.

Did anything break with the latest version? I haven't noticed anything while playing xD

Kolmas wrote:

i've started actually playing osu on linux this week, everything actually runs better than that on windows, just one weird thing, the game sometimes literally vanish in the middle of clicking a circles, idk if it's wine's problem or distro's problem (on pop os 21.10 now), but yeah other than this weird bug everything is pretty good

KatouMegumi wrote:

Kolmas wrote:

i've started actually playing osu on linux this week, everything actually runs better than that on windows, just one weird thing, the game sometimes literally vanish in the middle of clicking a circles, idk if it's wine's problem or distro's problem (on pop os 21.10 now), but yeah other than this weird bug everything is pretty good

What wine version/build?

MarshNello wrote:

I’d say on GonX as he followed the guide, ig he’s talking about those random crashes which occur rarely (at least here)

MarshNello wrote:

KatouMegumi wrote:

Kolmas wrote:

i've started actually playing osu on linux this week, everything actually runs better than that on windows, just one weird thing, the game sometimes literally vanish in the middle of clicking a circles, idk if it's wine's problem or distro's problem (on pop os 21.10 now), but yeah other than this weird bug everything is pretty good

What wine version/build?

I’d say on GonX as he followed the guide, ig he’s talking about those random crashes which occur rarely (at least here)

Kolmas wrote:

MarshNello wrote:

KatouMegumi wrote:

Kolmas wrote:

i've started actually playing osu on linux this week, everything actually runs better than that on windows, just one weird thing, the game sometimes literally vanish in the middle of clicking a circles, idk if it's wine's problem or distro's problem (on pop os 21.10 now), but yeah other than this weird bug everything is pretty good

What wine version/build?

I’d say on GonX as he followed the guide, ig he’s talking about those random crashes which occur rarely (at least here)

yeah i followed the guide from top to down and done everything (except the extra part) everything runs smoothly aside from the rare random crashes

the only info i have is every crashes so far is during gameplay, but didn't notice any other special things :shrug:

MarshNello wrote:

Kolmas wrote:

MarshNello wrote:

KatouMegumi wrote:

Kolmas wrote:

i've started actually playing osu on linux this week, everything actually runs better than that on windows, just one weird thing, the game sometimes literally vanish in the middle of clicking a circles, idk if it's wine's problem or distro's problem (on pop os 21.10 now), but yeah other than this weird bug everything is pretty good

What wine version/build?

I’d say on GonX as he followed the guide, ig he’s talking about those random crashes which occur rarely (at least here)

yeah i followed the guide from top to down and done everything (except the extra part) everything runs smoothly aside from the rare random crashes

the only info i have is every crashes so far is during gameplay, but didn't notice any other special things :shrug:

Try opening osu in your terminal with osu-wine and when those occur just paste the terminal’s output here, as Megumi says checking is better xD

idk i can't read the stuff

KatouMegumi wrote:

PSA: If you use pipewire, don't update to 0.3.41 yet or use self built version from git.

ImPristine wrote:

KatouMegumi wrote:

PSA: If you use pipewire, don't update to 0.3.41 yet or use self built version from git.

so what version of pipewire that is the most stable?

EDIT: i use pipewire 0.3.40

Kolmas wrote:

idk i can't read the stuff

System.AccessViolationException

Doxxz wrote:

Kolmas wrote:

idk i can't read the stuff

System.AccessViolationException

Welcome to hell.

sudo rm -rf /opt/wine-osu/

cd ~/Downloads

tar -xf wine-osu-7.0-rc4_staging-1-x86_64.pkg.tar.zst

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

MarshNello wrote:

Doxxz wrote:

Kolmas wrote:

idk i can't read the stuff

System.AccessViolationException

Welcome to hell.

Coming from heaven with an update e.e
First things first: what all these crashes have in common (besides System.AccessViolationException) is OSSOCK.select, and as I've read on ThePoon's ds (ty openglfreak) this socket code crash has been fixed in the latest Wine 7.0-rc3. Therefore I built it with gonX's patches and it seems to work like a charm xD

Replacing it is really easy:
Delete your current wine-osu version:

sudo rm -rf /opt/wine-osu/

Then download the latest wine-osu here:
https://drive.google.com/file/d/1YOMPZbgRTCR9j-9v9jREpDfkF3zOfaqy/view?usp=sharing

And just install it with the same commands as the guide:

cd ~/Downloads

tar -xf wine-osu-7.0_staging-1-x86_64.pkg.tar.zst

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

Doing this should fix those crashes while playing, just let me know if it really works as I've never gotten many of them xD

For Mint/Ubuntu users with GLIBC error using the other package:

hwsnemo has already updated the wine-osu package to 7.0-rc3 so updating your system should do the thing (or just do all the steps in the box again).

MarshNello wrote:

ImPristine wrote:

KatouMegumi wrote:

PSA: If you use pipewire, don't update to 0.3.41 yet or use self built version from git.

so what version of pipewire that is the most stable?

EDIT: i use pipewire 0.3.40

I’d stay on 0.3.40 for a while as latest version broke my OBS somehow lmao

BoofMonke wrote:

Also, I've heard that pipewire is not necessary as the +25ms delay does the job even for pulse. Is this true? I really can't upgrade to PipeWire as 1 crucial thing i depend on (Viper4Linux) does not work properly under pipewire even with all the tweaks about audio underflow etc.

KatouMegumi wrote:

pipewire 0.3.42 works fine, lol.

EnderNeko wrote:

How do i delete osu! because i just need to reinstall again

cd osu-wine

sudo ./install.sh uninstall

sudo rm -rf ~/.local/share/osu-wine

BeefBoy wrote:

I installed and everything is working fine but i cannot drag and drop osz and osk files. is there a fix for this as i currently don't have supporter

sudo wget --no-check-certificate 'https://docs.google.com/uc?export=download&id=1Zu5vK-ACs1KhF4Rju1HAIIPb6XC42s9X' -O /usr/bin/osu-wine

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

MarshNello wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

You sure you’re using PipeWire? That sounds like some Pulse thing xd always if you didn’t mess with Pipewire’s settings

krvqx wrote:

for some reason, if i try to change slider velocities or timings in editor by pressing F6, the whole game crashes
this didn't happen until recently and no idea why
i did the latest Patches (7.0 one) and didn't help

MarshNello wrote:

krvqx wrote:

for some reason, if i try to change slider velocities or timings in editor by pressing F6, the whole game crashes
this didn't happen until recently and no idea why
i did the latest Patches (7.0 one) and didn't help

could you give me the logs for that? just run osu-wine in your terminal, try pressing F6 in editor and post the output here

edit: i’m also gonna update the guide in a few days so if it doesn’t fix, try with that

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

mqwilliamscom wrote:

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

Dude you are a life saver. Works like a charm now.

Edit: all that's left is to figure out how to transfer my beatmaps and skins over to this device. Should be a piece of cake

01b0:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc55046

MarshNello wrote:

final result:


UPDATE: Guide is finally out on YouTube! Check it out here:
https://youtu.be/BdBcR8jfErc

A little introduction:
osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide, but thanks to PipeWire and to the latest custom builds it's actually even easier. Let's start 8^)

Prerequisites:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

 sudo apt update && sudo apt upgrade && sudo apt install git curl build-essential zstd

Arch Linux (Manjaro, Endeavour OS, etc.):

 sudo pacman -Syu git p7zip wget

Fedora:

 sudo dnf update 

 sudo dnf install git zstd p7zip p7zip-plugins wget 

 sudo dnf groupinstall "Development Tools" "Development Libraries" 

install wine and its dependencies:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

sudo dpkg --add-architecture i386
wget -nc https://dl.winehq.org/wine-builds/winehq.key
sudo apt-key add winehq.key
sudo apt-add-repository 'https://dl.winehq.org/wine-builds/ubuntu/'
sudo apt update
sudo apt install --install-recommends winehq-staging
sudo apt install winetricks

Arch Linux (Manjaro, Endeavour OS, etc.):

make sure to enable multilib first (https://i.imgur.com/DuLktxI.jpg)

sudo pacman -Sy
sudo pacman -S wine-staging winetricks
sudo pacman -S giflib lib32-giflib libpng lib32-libpng libldap lib32-libldap gnutls lib32-gnutls mpg123 lib32-mpg123 openal lib32-openal v4l-utils lib32-v4l-utils libpulse lib32-libpulse alsa-plugins lib32-alsa-plugins alsa-lib lib32-alsa-lib libjpeg-turbo lib32-libjpeg-turbo libxcomposite lib32-libxcomposite libxinerama lib32-libxinerama ncurses lib32-ncurses opencl-icd-loader lib32-opencl-icd-loader libxslt lib32-libxslt libva lib32-libva gtk3 lib32-gtk3 gst-plugins-base-libs lib32-gst-plugins-base-libs vulkan-icd-loader lib32-vulkan-icd-loader cups samba dosbox

Fedora:

 sudo dnf install alsa-plugins-pulseaudio.i686 glibc-devel.i686 glibc-devel libgcc.i686 libX11-devel.i686 freetype-devel.i686 libXcursor-devel.i686 libXi-devel.i686 libXext-devel.i686 libXxf86vm-devel.i686 libXrandr-devel.i686 libXinerama-devel.i686 mesa-libGLU-devel.i686 mesa-libOSMesa-devel.i686 libXrender-devel.i686 libpcap-devel.i686 ncurses-devel.i686 libzip-devel.i686 lcms2-devel.i686 zlib-devel.i686 libv4l-devel.i686 libgphoto2-devel.i686 cups-devel.i686 libxml2-devel.i686 openldap-devel.i686 libxslt-devel.i686 gnutls-devel.i686 libpng-devel.i686 flac-libs.i686 json-c.i686 libICE.i686 libSM.i686 libXtst.i686 libasyncns.i686 liberation-narrow-fonts.noarch libieee1284.i686 libogg.i686 libsndfile.i686 libuuid.i686 libva.i686 libvorbis.i686 libwayland-client.i686 libwayland-server.i686 llvm-libs.i686 mesa-dri-drivers.i686 mesa-filesystem.i686 mesa-libEGL.i686 mesa-libgbm.i686 nss-mdns.i686 ocl-icd.i686 pulseaudio-libs.i686 sane-backends-libs.i686 tcp_wrappers-libs.i686 unixODBC.i686 samba-common-tools.x86_64 samba-libs.x86_64 samba-winbind.x86_64 samba-winbind-clients.x86_64 samba-winbind-modules.x86_64 mesa-libGL-devel.i686 fontconfig-devel.i686 libXcomposite-devel.i686 libtiff-devel.i686 openal-soft-devel.i686 mesa-libOpenCL-devel.i686 opencl-utils-devel.i686 alsa-lib-devel.i686 gsm-devel.i686 libjpeg-turbo-devel.i686 pulseaudio-libs-devel.i686 pulseaudio-libs-devel gtk3-devel.i686 libattr-devel.i686 libva-devel.i686 libexif-devel.i686 libexif.i686 glib2-devel.i686 mpg123-devel.i686 mpg123-devel.x86_64 libcom_err-devel.i686 libcom_err-devel.x86_64 libFAudio-devel.i686 libFAudio-devel.x86_64

 sudo dnf groupinstall "C Development Tools and Libraries"

 sudo dnf groupinstall "Development Tools"

 sudo dnf install wine

(if you're using other distros, give this a look https://www.gloriouseggroll.tv/how-to-get-out-of-wine-dependency-hell/)

also make sure you installed the right drivers for your gpu:
https://github.com/lutris/docs/blob/master/InstallingDrivers.md

Let's begin from Latency:

Latency: Installing Pipewire

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

To install Pipewire on Debian, just follow these commands:

sudo add-apt-repository ppa:pipewire-debian/pipewire-upstream
sudo apt update
sudo apt install pipewire
sudo apt install libspa-0.2-bluetooth
sudo apt install pipewire-audio-client-libraries
systemctl --user daemon-reload
systemctl --user --now disable pulseaudio.service pulseaudio.socket
systemctl --user mask pulseaudio
systemctl --user --now enable pipewire-media-session.service pipewire pipewire-pulse

And then just reboot and you should be done.

Arch Linux (Manjaro, Endeavour OS, etc.):

Remove PulseAudio:

sudo pacman -Rdd pulseaudio

And install PipeWire:

sudo pacman -S pipewire pipewire-pulse pipewire-jack pipewire-alsa wireplumber

And then just reboot and you should be done.

Fedora:

Well, Fedora's latest versions already ship with Pipewire xD you might want to check doing this:

 sudo dnf install pulseaudio-utils

 pactl info

And if you see Server Name: PulseAudio (on PipeWire) you're good to go.

After doing this, you should be already done with Pipewire

Now let's install osu! and set up our Wine:

Installing osu! (All distros)

To install osu!, we'll just use Forefront's package on gitlab (https://gitlab.com/osu-wine/osu-wine). His package is the most stable one I've ever tried, so huge grats and credits to him e.e

Installing the game is just as simple as this:

git clone https://gitlab.com/osu-wine/osu-wine

cd osu-wine

sudo ./install.sh

osu-wine

The game is now working, but we need to change the Wine version to an osu! specific one.
To do this, let's download the wine-osu 7.0 package with gonX's patches from here:
https://drive.google.com/file/d/1xgJIe18ccBx6yjPcmBxDbTnS1XxwrAcc/view?usp=sharing

Once you've done that, you need to extract the package.
You can do it like this: (remember to change "Downloads" to your language's name if needed!)

cd ~/Downloads

tar -xf wine-osu-7.0-x86_64.pkg.tar.zst

Now let's copy the extracted folder to the /opt directory:

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

And let's edit the /etc/osu-wine.conf file:

sudo nano /etc/osu-wine.conf

Here, you need to uncomment the PATH line at the end, just like this:

## Path, DO NOT EDIT THIS VARIABLE, ONLY UNCOMMENT
PATH="/opt/wine-osu/bin:$PATH"

Once you've done this, just save with Ctrl+O and exit with Ctrl+X.
Now use this last command to copy the .conf file:

cp /etc/osu-wine.conf ~/.osu-wine.conf

Last but not least: run this to fix drag and drop songs:

sudo wget --no-check-certificate 'https://docs.google.com/uc?export=download&id=1Zu5vK-ACs1KhF4Rju1HAIIPb6XC42s9X' -O /usr/bin/osu-wine

The installation is now finished! You need just to open osu! and run it.

But before playing, the last thing you need to do is to set your universal offset to -25ms, so that your osu! will sound just like on Windows.



Warning: -25ms is what I generally recommend, but try to find your sweet spot from -40ms!

And you're done! You can now play osu!



Check the troubleshooting box if you need any help or just write me on Twitter (@MarshNello) [OS in the ss is Arch Linux GNOME]
And that's it! Enjoy playing osu! on your Linux!

Got any error? (GLIBC, Game not starting, input lag, random crashes etc.)
Check the box below:

Extra info and troubleshooting:

Open me \o/:

Game won't start/ntdll.so (GLIBC_2.32) error

This error actually occurs a lot when using Ubuntu or Debian-based distros. whose GLIBC isn't updated.
Before doing anything, upgrading your system might fix depending on your distro:

sudo apt update
sudo apt upgrade

If that didn't help, we will need to change some things xD

Assuming you've followed the guide until the end, let's delete wine-osu first.

sudo rm -rf /opt/wine-osu/

Let's now download another version, working on older GLIBCs as well.
Make sure curl is installed first:

sudo apt install curl

And now:

echo 'deb http://download.opensuse.org/repositories/home:/hwsnemo:/packaged-wine-osu/xUbuntu_20.04/ /' | sudo tee /etc/apt/sources.list.d/home:hwsnemo:packaged-wine-osu.list
curl -fsSL https://download.opensuse.org/repositories/home:hwsnemo:packaged-wine-osu/xUbuntu_20.04/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/home_hwsnemo_packaged-wine-osu.gpg > /dev/null
sudo apt update
sudo apt install wine-osu

You can now play perfectly fine e.e

(Instructions might change depending on your distro, you can check yourself here:
https://software.opensuse.org//download.html?project=home%3Ahwsnemo%3Apackaged-wine-osu&package=wine-osu)

Input lag/Compositing

First of all, if you're gaming on Linux make sure to install all the necessary dependencies listed above (see Wine and dependencies)

Otherwise, what really affects input lag is desktop compositing, which is active by default on many desktop environments even when gaming.
If you're using Lutris to run osu!, you can disable it from the rule as you can see here:
(thanks TheKej for the reply below <3)


If you are not, check the other box for "How to add osu! to Lutris" xd

How to add osu! to Lutris

If you don't know what Lutris is, just google it and install it for your own system (it's really simple).

Now, if you're never used Lutris before, open it and then run this command:

cd ~/.local/share/lutris/runners/ && mkdir wine

This will create our wine folder; then, let's copy the Wine version we downloaded beforehand here as well:

sudo cp -r /opt/wine-osu/ ~/.local/share/lutris/runners/wine

Close Lutris and open it again.
Click on the + button you can find on the top left of your Lutris and just write osu! (or whatever you want) in the name. For the runner instead, just choose Wine (click yes to whatever pops up). It should look like this:



After this, go on the "Game options" box and just set it up like this:

Executable:

~/.local/share/osu-wine/OSU/osu!.exe

Working directory:

~/.local/share/osu-wine/OSU

Wine prefix:

~/.local/share/osu-wine/WINE.win32

Example:



Now let's go to the "Runner options" box and here select "wine-osu":



Last but not least, let's disable our desktop effects aka compositor in "System options" (enable advanced options):



And we're done! You can now run your osu! through Lutris as well!

osu! disappears/crashes randomly

These random crashes have been a thing for many people as they depended on a wine bug, and what those have in common (besides System.AccessViolationException) is OSSOCK.select. As I've read on ThePoon's ds (ty openglfreak), this socket code crash has been fixed in the latest Wine 7.0-rc3, and also listed in Wine 7.0-rc4's bug fixes.



So I built Wine 7.0-rc4 with gonX's patches and it seems to work like a charm xD

Replacing it is really easy:
Delete your current wine-osu version:

sudo rm -rf /opt/wine-osu/

Then download the latest wine-osu here:
https://drive.google.com/file/d/14Ikp0x2vVPIy0wBcC2bPvTJSlaqCwfW9/view?usp=sharing

And just install it with the same commands as the guide:

cd ~/Downloads

tar -xf wine-osu-7.0-rc4_staging-1-x86_64.pkg.tar.zst

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

Doing this should fix those crashes while playing, just let me know if it really works as I've never gotten many of them xD

For Mint/Ubuntu users with GLIBC error using the other package:

hwsnemo has already updated the wine-osu package to 7.0-rc3 so updating your system should do the thing (or just do all the steps in the box again).

Optimize your performance: Gamemode

Gamemode is a tool which might improve your gaming depending on your system: to install it and try it, follow the instructions spunout enjoyer wrote here: https://osu.ppy.sh/community/forums/topics/1248084?n=61
(great job <3)

If you notice your games are actually running worse than before, just disable its rule on Lutris/don't use it when starting the game.

Even lower latency: gonX's PipeWire settings

If after installing osu! your latency sounds strange and you want an even lower one, we'll apply gonX's PipeWire "patch" (credits to him and don't forget to thank him for the help he always delivers with others on ThePoon's discord <3)

First of all, to prevent any missing files, run this command:

 mkdir -p ~/.config/pipewire && cp -rv /usr/share/pipewire/* ~/.config/pipewire/ 

After doing this, you just need to edit the pipewire-pulse.conf file in ~/.config/pipewire/
I'll do it with nano:

sudo nano ~/.config/pipewire/pipewire-pulse.conf

Here, you might want to push your latency as far as possible: starting from 256, try to find the closest value to 32 which makes your sound stable/not cracking. It depends on your pc, there's not a "default" value xD
I'll use 32 as an example, so edit the file like this:

context.modules = {
    pulse.min.req = 32/48000              # 0.67ms
    pulse.min.quantum = 32/48000          # 0.67ms
}

Once you've done this, just save with Ctrl+O and exit with Ctrl+X.
Reboot, and the patch is done e.e

Moving your songs/skins from Windows

First of all, make sure you installed the ntfs-3g package needed to read Windows partitions:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

sudo apt install ntfs-3g

Arch Linux (Manjaro, Endeavour OS, etc.):

sudo pacman -Sy ntfs-3g

Fedora:

sudo dnf install ntfs-3g

Then, just copy the Skins and Songs folder to your Linux osu! folder, that you can find at:

~/.local/share/osu-wine/OSU

PP Counter for OBS: gosumemory

Gosumemory actually works perfectly with this osu! guide e.e
Let's start from downloading the latest release from GitHub (you obv need to download the Linux version): https://github.com/l3lackShark/gosumemory/releases/
I'll go with amd64 as my PC is 64bits.

Now let's extract the file in the gosumemory folder: (remember to change "Downloads" to your language's name if needed!)

 cd ~/Downloads && mkdir gosumemory

 unzip -q gosumemory_linux_amd64.zip -d ~/Downloads/gosumemory/

Let's now run gosumemory once with:

 cd ~/Downloads/gosumemory && chmod +x gosumemory

 sudo ./gosumemory

Ignore the error and edit this file:

 sudo nano ~/Downloads/gosumemory/config.ini

Here, you need to edit these 2 lines like this: (replace username with your own)

 wine = true 

 path = /home/username/.local/share/osu-wine/OSU/Songs

Save with CTRL+O and exit with CTRL+X.

Our gosumemory is now working, but let's create a script to launch it whenever we want:

 sudo nano /usr/bin/gosumemory

Here, just paste these commands:

 #!/bin/sh

cd ~/Downloads/gosumemory
sudo ./gosumemory

And now just launch this one:

 sudo chmod +x /usr/bin/gosumemory

And we're done! You can now launch gosumemory whenever you want by just typing:

 gosumemory

in your terminal! e.e

Last thing to do is: adding it to OBS.
Here, I reccommend y'all to use the Snap version of OBS (https://snapcraft.io/obs-studio) as it provides everything you might need for streaming.
Now open your osu!, launch gosumemory and then open your browser at this link: http://127.0.0.1:24050

Here you should see all the different overlays available: let's say I choose this one



You need to copy that link and paste in it OBS > Sources > Browser like this:



And you're done! PP Counter is finally working xD

Tablet drivers on Linux: OpenTabletDriver (+ Fedora install)

OpenTabletDriver is the perfect alternative to any tablet driver.
Follow its guide to install it:
https://opentabletdriver.net/Wiki/Install/Linux

Fedora isn't supported yet as of right now, so you need to compile it from source to actually use it. It's a bit long, but I wrote every step here e.e:

Fedora instructions

Compiling OTD from source

Let's start from dependencies: (most of them should be already installed)

 sudo dnf install libX11 libXrandr libevdev gtk3 bash

Let's now install .NET 6 SDK which isn't available in repositories yet xd
Follow these commands:

 cd && wget https://download.visualstudio.microsoft.com/download/pr/17b6759f-1af0-41bc-ab12-209ba0377779/e8d02195dbf1434b940e0f05ae086453/dotnet-sdk-6.0.100-linux-x64.tar.gz && mkdir dotnet

 tar zxf dotnet-sdk-6.0.100-linux-x64.tar.gz -C dotnet/

 export PATH=$PATH:$HOME/dotnet

Last thing to do is to build OpenTabletDriver:

 git clone https://github.com/OpenTabletDriver/OpenTabletDriver.git && cd OpenTabletDriver/

 chmod +x build.sh

Now replace username with your own:

 sudo env "PATH=$PATH:/home/username/dotnet/" ./build.sh

 chmod +x generate-rules.sh

 sudo env "PATH=$PATH:/home/username/dotnet/" ./generate-rules.sh

 sudo mv ./bin/99-opentabletdriver.rules /etc/udev/rules.d/

Let's now create a script to launch OTD:

OTD Scripts

Let's start:

 sudo nano /usr/bin/otd

Here, you need to paste this: (change username with your own)

 !/bin/bash
cd /home/username/OpenTabletDriver/OpenTabletDriver.UX.Gtk/bin/Release/net6.0/linux-x64
export PATH=$PATH:$HOME/dotnet
dotnet ./OpenTabletDriver.UX.Gtk.dll "$@"

Save with CTRL+O and exit with CTRL+X; now execute this one:

 sudo chmod +x /usr/bin/otd

Let's now create a script to launch the OTD daemon:

 sudo nano /usr/bin/otddaemon

Paste this: (change username with your own)

 #!/bin/bash
cd /home/username/OpenTabletDriver/bin
export PATH=$PATH:$HOME/dotnet
if [ $# -eq 0 ]
then
    if [[ ! -v DISPLAY ]] && [[ ! -v WAYLAND_DISPLAY ]]
    then
        echo "DISPLAY and/or WAYLAND_DISPLAY is not set"
        exit 64
    fi
    dotnet ./OpenTabletDriver.Daemon.dll -c ./Configurations
else
    dotnet ./OpenTabletDriver.Console.dll "$@"
fi

Now just run this:

 sudo chmod +x /usr/bin/otddaemon

Our two scripts are now finally set up; let's create the last one to launch both together:

 sudo nano /usr/bin/opentabletdriver

Here, just paste this:

 #!/bin/bash
otddaemon &
P1=$!
otd &
P2=$!
wait $P1 $P2

Save with CTRL+O and exit with CTRL+X; now execute this one:

 sudo chmod +x /usr/bin/opentabletdriver

You're finally done! Launch OTD by typing:

 opentabletdriver

in your terminal e.e

Example:

osu! installer can't download files/XComposite error etc.

All these errors come from missing dependencies: make sure to install them all (see Wine and dependencies)

No sound when opening osu!

You probably only need to reboot or reload PipeWire by doing this:

sudo systemctl --user restart pipewire pipewire-pulse
sudo systemctl --user daemon-reload

Special thanks to:

1. KatouMegumi's guide: https://wiki.archlinux.org/title/User:Katoumegumi#osu!_(stable)_on_Arch_Linux

1. ThePoon's Discord server: https://discord.com/invite/thepoon

1. GonX's wine-osu builds: https://drive.google.com/drive/folders/17MVlyXixv7uS3JW4B-H8oS4qgLn7eBw5

1. hwsnemo's prepackaged wine-osu:
   https://software.opensuse.org//download.html?project=home%3Ahwsnemo%3Apackaged-wine-osu&package=wine-osu

1. l3lackShark's gosumemory: https://github.com/l3lackShark/gosumemory

And to everyone willing to help! :3

Kolmas wrote:

mqwilliamscom wrote:

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

Dude you are a life saver. Works like a charm now.

Edit: all that's left is to figure out how to transfer my beatmaps and skins over to this device. Should be a piece of cake

This happens to me just today (things are fine yesterday even after two reboot and a system update) , turning on audio compatibility mode does solve the audio issue but whenever i tried to play a map or watch a replay, it will stuck and jitter on the first note then straight up crashing the game and shows the following error code

01b0:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc55046

MarshNello wrote:

Kolmas wrote:

mqwilliamscom wrote:

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

Dude you are a life saver. Works like a charm now.

Edit: all that's left is to figure out how to transfer my beatmaps and skins over to this device. Should be a piece of cake

This happens to me just today (things are fine yesterday even after two reboot and a system update) , turning on audio compatibility mode does solve the audio issue but whenever i tried to play a map or watch a replay, it will stuck and jitter on the first note then straight up crashing the game and shows the following error code

01b0:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc55046

latest pipewire broke something here too a.a try to revert with downgrade

MarshNello wrote:

final result:


UPDATE: Guide is finally out on YouTube! Check it out here:
https://youtu.be/BdBcR8jfErc

A little introduction:
osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide, but thanks to PipeWire and to the latest custom builds it's actually even easier. Let's start 8^)

Prerequisites:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

 sudo apt update && sudo apt upgrade && sudo apt install git curl build-essential zstd

Arch Linux (Manjaro, Endeavour OS, etc.):

 sudo pacman -Syu git p7zip wget

Fedora:

 sudo dnf update 

 sudo dnf install git zstd p7zip p7zip-plugins wget 

 sudo dnf groupinstall "Development Tools" "Development Libraries" 

install wine and its dependencies:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

sudo dpkg --add-architecture i386
wget -nc https://dl.winehq.org/wine-builds/winehq.key
sudo apt-key add winehq.key
sudo apt-add-repository 'https://dl.winehq.org/wine-builds/ubuntu/'
sudo apt update
sudo apt install --install-recommends winehq-staging
sudo apt install winetricks

Arch Linux (Manjaro, Endeavour OS, etc.):

make sure to enable multilib first (https://i.imgur.com/DuLktxI.jpg)

sudo pacman -Sy
sudo pacman -S wine-staging winetricks
sudo pacman -S giflib lib32-giflib libpng lib32-libpng libldap lib32-libldap gnutls lib32-gnutls mpg123 lib32-mpg123 openal lib32-openal v4l-utils lib32-v4l-utils libpulse lib32-libpulse alsa-plugins lib32-alsa-plugins alsa-lib lib32-alsa-lib libjpeg-turbo lib32-libjpeg-turbo libxcomposite lib32-libxcomposite libxinerama lib32-libxinerama ncurses lib32-ncurses opencl-icd-loader lib32-opencl-icd-loader libxslt lib32-libxslt libva lib32-libva gtk3 lib32-gtk3 gst-plugins-base-libs lib32-gst-plugins-base-libs vulkan-icd-loader lib32-vulkan-icd-loader cups samba dosbox

Fedora:

 sudo dnf install alsa-plugins-pulseaudio.i686 glibc-devel.i686 glibc-devel libgcc.i686 libX11-devel.i686 freetype-devel.i686 libXcursor-devel.i686 libXi-devel.i686 libXext-devel.i686 libXxf86vm-devel.i686 libXrandr-devel.i686 libXinerama-devel.i686 mesa-libGLU-devel.i686 mesa-libOSMesa-devel.i686 libXrender-devel.i686 libpcap-devel.i686 ncurses-devel.i686 libzip-devel.i686 lcms2-devel.i686 zlib-devel.i686 libv4l-devel.i686 libgphoto2-devel.i686 cups-devel.i686 libxml2-devel.i686 openldap-devel.i686 libxslt-devel.i686 gnutls-devel.i686 libpng-devel.i686 flac-libs.i686 json-c.i686 libICE.i686 libSM.i686 libXtst.i686 libasyncns.i686 liberation-narrow-fonts.noarch libieee1284.i686 libogg.i686 libsndfile.i686 libuuid.i686 libva.i686 libvorbis.i686 libwayland-client.i686 libwayland-server.i686 llvm-libs.i686 mesa-dri-drivers.i686 mesa-filesystem.i686 mesa-libEGL.i686 mesa-libgbm.i686 nss-mdns.i686 ocl-icd.i686 pulseaudio-libs.i686 sane-backends-libs.i686 tcp_wrappers-libs.i686 unixODBC.i686 samba-common-tools.x86_64 samba-libs.x86_64 samba-winbind.x86_64 samba-winbind-clients.x86_64 samba-winbind-modules.x86_64 mesa-libGL-devel.i686 fontconfig-devel.i686 libXcomposite-devel.i686 libtiff-devel.i686 openal-soft-devel.i686 mesa-libOpenCL-devel.i686 opencl-utils-devel.i686 alsa-lib-devel.i686 gsm-devel.i686 libjpeg-turbo-devel.i686 pulseaudio-libs-devel.i686 pulseaudio-libs-devel gtk3-devel.i686 libattr-devel.i686 libva-devel.i686 libexif-devel.i686 libexif.i686 glib2-devel.i686 mpg123-devel.i686 mpg123-devel.x86_64 libcom_err-devel.i686 libcom_err-devel.x86_64 libFAudio-devel.i686 libFAudio-devel.x86_64

 sudo dnf groupinstall "C Development Tools and Libraries"

 sudo dnf groupinstall "Development Tools"

 sudo dnf install wine

(if you're using other distros, give this a look https://www.gloriouseggroll.tv/how-to-get-out-of-wine-dependency-hell/)

also make sure you installed the right drivers for your gpu:
https://github.com/lutris/docs/blob/master/InstallingDrivers.md

Let's begin from Latency:

Latency: Installing Pipewire

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

To install Pipewire on Debian, just follow these commands:

sudo add-apt-repository ppa:pipewire-debian/pipewire-upstream
sudo apt update
sudo apt install pipewire
sudo apt install libspa-0.2-bluetooth
sudo apt install pipewire-audio-client-libraries
systemctl --user daemon-reload
systemctl --user --now disable pulseaudio.service pulseaudio.socket
systemctl --user mask pulseaudio
systemctl --user --now enable pipewire-media-session.service pipewire pipewire-pulse

And then just reboot and you should be done.

Arch Linux (Manjaro, Endeavour OS, etc.):

Remove PulseAudio:

sudo pacman -Rdd pulseaudio

And install PipeWire:

sudo pacman -S pipewire pipewire-pulse pipewire-jack pipewire-alsa wireplumber

And then just reboot and you should be done.

Fedora:

Well, Fedora's latest versions already ship with Pipewire xD you might want to check doing this:

 sudo dnf install pulseaudio-utils

 pactl info

And if you see Server Name: PulseAudio (on PipeWire) you're good to go.

After doing this, you should be already done with Pipewire

Now let's install osu! and set up our Wine:

Installing osu! (All distros)

To install osu!, we'll just use Forefront's package on gitlab (https://gitlab.com/osu-wine/osu-wine). His package is the most stable one I've ever tried, so huge grats and credits to him e.e

Installing the game is just as simple as this:

git clone https://gitlab.com/osu-wine/osu-wine

cd osu-wine

sudo ./install.sh

osu-wine

The game is now working, but we need to change the Wine version to an osu! specific one.
To do this, let's download the wine-osu 7.0 package with gonX's patches from here:
https://drive.google.com/file/d/1xgJIe18ccBx6yjPcmBxDbTnS1XxwrAcc/view?usp=sharing

Once you've done that, you need to extract the package.
You can do it like this: (remember to change "Downloads" to your language's name if needed!)

cd ~/Downloads

tar -xf wine-osu-7.0-x86_64.pkg.tar.zst

Now let's copy the extracted folder to the /opt directory:

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

And let's edit the /etc/osu-wine.conf file:

sudo nano /etc/osu-wine.conf

Here, you need to uncomment the PATH line at the end, just like this:

## Path, DO NOT EDIT THIS VARIABLE, ONLY UNCOMMENT
PATH="/opt/wine-osu/bin:$PATH"

Once you've done this, just save with Ctrl+O and exit with Ctrl+X.
Now use this last command to copy the .conf file:

cp /etc/osu-wine.conf ~/.osu-wine.conf

Last but not least: run this to fix drag and drop songs:

sudo wget --no-check-certificate 'https://docs.google.com/uc?export=download&id=1Zu5vK-ACs1KhF4Rju1HAIIPb6XC42s9X' -O /usr/bin/osu-wine

The installation is now finished! You need just to open osu! and run it.

But before playing, the last thing you need to do is to set your universal offset to -25ms, so that your osu! will sound just like on Windows.



Warning: -25ms is what I generally recommend, but try to find your sweet spot from -40ms!

And you're done! You can now play osu!



Check the troubleshooting box if you need any help or just write me on Twitter (@MarshNello) [OS in the ss is Arch Linux GNOME]
And that's it! Enjoy playing osu! on your Linux!

Got any error? (GLIBC, Game not starting, input lag, random crashes etc.)
Check the box below:

Extra info and troubleshooting:

Open me \o/:

Game won't start/ntdll.so (GLIBC_2.32) error

This error actually occurs a lot when using Ubuntu or Debian-based distros. whose GLIBC isn't updated.
Before doing anything, upgrading your system might fix depending on your distro:

sudo apt update
sudo apt upgrade

If that didn't help, we will need to change some things xD

Assuming you've followed the guide until the end, let's delete wine-osu first.

sudo rm -rf /opt/wine-osu/

Let's now download another version, working on older GLIBCs as well.
Make sure curl is installed first:

sudo apt install curl

And now:

echo 'deb http://download.opensuse.org/repositories/home:/hwsnemo:/packaged-wine-osu/xUbuntu_20.04/ /' | sudo tee /etc/apt/sources.list.d/home:hwsnemo:packaged-wine-osu.list
curl -fsSL https://download.opensuse.org/repositories/home:hwsnemo:packaged-wine-osu/xUbuntu_20.04/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/home_hwsnemo_packaged-wine-osu.gpg > /dev/null
sudo apt update
sudo apt install wine-osu

You can now play perfectly fine e.e

(Instructions might change depending on your distro, you can check yourself here:
https://software.opensuse.org//download.html?project=home%3Ahwsnemo%3Apackaged-wine-osu&package=wine-osu)

Input lag/Compositing

First of all, if you're gaming on Linux make sure to install all the necessary dependencies listed above (see Wine and dependencies)

Otherwise, what really affects input lag is desktop compositing, which is active by default on many desktop environments even when gaming.
If you're using Lutris to run osu!, you can disable it from the rule as you can see here:
(thanks TheKej for the reply below <3)


If you are not, check the other box for "How to add osu! to Lutris" xd

How to add osu! to Lutris

If you don't know what Lutris is, just google it and install it for your own system (it's really simple).

Now, if you're never used Lutris before, open it and then run this command:

cd ~/.local/share/lutris/runners/ && mkdir wine

This will create our wine folder; then, let's copy the Wine version we downloaded beforehand here as well:

sudo cp -r /opt/wine-osu/ ~/.local/share/lutris/runners/wine

Close Lutris and open it again.
Click on the + button you can find on the top left of your Lutris and just write osu! (or whatever you want) in the name. For the runner instead, just choose Wine (click yes to whatever pops up). It should look like this:



After this, go on the "Game options" box and just set it up like this:

Executable:

~/.local/share/osu-wine/OSU/osu!.exe

Working directory:

~/.local/share/osu-wine/OSU

Wine prefix:

~/.local/share/osu-wine/WINE.win32

Example:



Now let's go to the "Runner options" box and here select "wine-osu":



Last but not least, let's disable our desktop effects aka compositor in "System options" (enable advanced options):



And we're done! You can now run your osu! through Lutris as well!

osu! disappears/crashes randomly

These random crashes have been a thing for many people as they depended on a wine bug, and what those have in common (besides System.AccessViolationException) is OSSOCK.select. As I've read on ThePoon's ds (ty openglfreak), this socket code crash has been fixed in the latest Wine 7.0-rc3, and also listed in Wine 7.0-rc4's bug fixes.



So I built Wine 7.0-rc4 with gonX's patches and it seems to work like a charm xD

Replacing it is really easy:
Delete your current wine-osu version:

sudo rm -rf /opt/wine-osu/

Then download the latest wine-osu here:
https://drive.google.com/file/d/14Ikp0x2vVPIy0wBcC2bPvTJSlaqCwfW9/view?usp=sharing

And just install it with the same commands as the guide:

cd ~/Downloads

tar -xf wine-osu-7.0-rc4_staging-1-x86_64.pkg.tar.zst

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

Doing this should fix those crashes while playing, just let me know if it really works as I've never gotten many of them xD

For Mint/Ubuntu users with GLIBC error using the other package:

hwsnemo has already updated the wine-osu package to 7.0-rc3 so updating your system should do the thing (or just do all the steps in the box again).

Optimize your performance: Gamemode

Gamemode is a tool which might improve your gaming depending on your system: to install it and try it, follow the instructions spunout enjoyer wrote here: https://osu.ppy.sh/community/forums/topics/1248084?n=61
(great job <3)

If you notice your games are actually running worse than before, just disable its rule on Lutris/don't use it when starting the game.

Even lower latency: gonX's PipeWire settings

If after installing osu! your latency sounds strange and you want an even lower one, we'll apply gonX's PipeWire "patch" (credits to him and don't forget to thank him for the help he always delivers with others on ThePoon's discord <3)

First of all, to prevent any missing files, run this command:

 mkdir -p ~/.config/pipewire && cp -rv /usr/share/pipewire/* ~/.config/pipewire/ 

After doing this, you just need to edit the pipewire-pulse.conf file in ~/.config/pipewire/
I'll do it with nano:

sudo nano ~/.config/pipewire/pipewire-pulse.conf

Here, you might want to push your latency as far as possible: starting from 256, try to find the closest value to 32 which makes your sound stable/not cracking. It depends on your pc, there's not a "default" value xD
I'll use 32 as an example, so edit the file like this:

context.modules = {
    pulse.min.req = 32/48000              # 0.67ms
    pulse.min.quantum = 32/48000          # 0.67ms
}

Once you've done this, just save with Ctrl+O and exit with Ctrl+X.
Reboot, and the patch is done e.e

Moving your songs/skins from Windows

First of all, make sure you installed the ntfs-3g package needed to read Windows partitions:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

sudo apt install ntfs-3g

Arch Linux (Manjaro, Endeavour OS, etc.):

sudo pacman -Sy ntfs-3g

Fedora:

sudo dnf install ntfs-3g

Then, just copy the Skins and Songs folder to your Linux osu! folder, that you can find at:

~/.local/share/osu-wine/OSU

PP Counter for OBS: gosumemory

Gosumemory actually works perfectly with this osu! guide e.e
Let's start from downloading the latest release from GitHub (you obv need to download the Linux version): https://github.com/l3lackShark/gosumemory/releases/
I'll go with amd64 as my PC is 64bits.

Now let's extract the file in the gosumemory folder: (remember to change "Downloads" to your language's name if needed!)

 cd ~/Downloads && mkdir gosumemory

 unzip -q gosumemory_linux_amd64.zip -d ~/Downloads/gosumemory/

Let's now run gosumemory once with:

 cd ~/Downloads/gosumemory && chmod +x gosumemory

 sudo ./gosumemory

Ignore the error and edit this file:

 sudo nano ~/Downloads/gosumemory/config.ini

Here, you need to edit these 2 lines like this: (replace username with your own)

 wine = true 

 path = /home/username/.local/share/osu-wine/OSU/Songs

Save with CTRL+O and exit with CTRL+X.

Our gosumemory is now working, but let's create a script to launch it whenever we want:

 sudo nano /usr/bin/gosumemory

Here, just paste these commands:

 #!/bin/sh

cd ~/Downloads/gosumemory
sudo ./gosumemory

And now just launch this one:

 sudo chmod +x /usr/bin/gosumemory

And we're done! You can now launch gosumemory whenever you want by just typing:

 gosumemory

in your terminal! e.e

Last thing to do is: adding it to OBS.
Here, I reccommend y'all to use the Snap version of OBS (https://snapcraft.io/obs-studio) as it provides everything you might need for streaming.
Now open your osu!, launch gosumemory and then open your browser at this link: http://127.0.0.1:24050

Here you should see all the different overlays available: let's say I choose this one



You need to copy that link and paste in it OBS > Sources > Browser like this:



And you're done! PP Counter is finally working xD

Tablet drivers on Linux: OpenTabletDriver (+ Fedora install)

OpenTabletDriver is the perfect alternative to any tablet driver.
Follow its guide to install it:
https://opentabletdriver.net/Wiki/Install/Linux

Fedora isn't supported yet as of right now, so you need to compile it from source to actually use it. It's a bit long, but I wrote every step here e.e:

Fedora instructions

Compiling OTD from source

Let's start from dependencies: (most of them should be already installed)

 sudo dnf install libX11 libXrandr libevdev gtk3 bash

Let's now install .NET 6 SDK which isn't available in repositories yet xd
Follow these commands:

 cd && wget https://download.visualstudio.microsoft.com/download/pr/17b6759f-1af0-41bc-ab12-209ba0377779/e8d02195dbf1434b940e0f05ae086453/dotnet-sdk-6.0.100-linux-x64.tar.gz && mkdir dotnet

 tar zxf dotnet-sdk-6.0.100-linux-x64.tar.gz -C dotnet/

 export PATH=$PATH:$HOME/dotnet

Last thing to do is to build OpenTabletDriver:

 git clone https://github.com/OpenTabletDriver/OpenTabletDriver.git && cd OpenTabletDriver/

 chmod +x build.sh

Now replace username with your own:

 sudo env "PATH=$PATH:/home/username/dotnet/" ./build.sh

 chmod +x generate-rules.sh

 sudo env "PATH=$PATH:/home/username/dotnet/" ./generate-rules.sh

 sudo mv ./bin/99-opentabletdriver.rules /etc/udev/rules.d/

Let's now create a script to launch OTD:

OTD Scripts

Let's start:

 sudo nano /usr/bin/otd

Here, you need to paste this: (change username with your own)

 !/bin/bash
cd /home/username/OpenTabletDriver/OpenTabletDriver.UX.Gtk/bin/Release/net6.0/linux-x64
export PATH=$PATH:$HOME/dotnet
dotnet ./OpenTabletDriver.UX.Gtk.dll "$@"

Save with CTRL+O and exit with CTRL+X; now execute this one:

 sudo chmod +x /usr/bin/otd

Let's now create a script to launch the OTD daemon:

 sudo nano /usr/bin/otddaemon

Paste this: (change username with your own)

 #!/bin/bash
cd /home/username/OpenTabletDriver/bin
export PATH=$PATH:$HOME/dotnet
if [ $# -eq 0 ]
then
    if [[ ! -v DISPLAY ]] && [[ ! -v WAYLAND_DISPLAY ]]
    then
        echo "DISPLAY and/or WAYLAND_DISPLAY is not set"
        exit 64
    fi
    dotnet ./OpenTabletDriver.Daemon.dll -c ./Configurations
else
    dotnet ./OpenTabletDriver.Console.dll "$@"
fi

Now just run this:

 sudo chmod +x /usr/bin/otddaemon

Our two scripts are now finally set up; let's create the last one to launch both together:

 sudo nano /usr/bin/opentabletdriver

Here, just paste this:

 #!/bin/bash
otddaemon &
P1=$!
otd &
P2=$!
wait $P1 $P2

Save with CTRL+O and exit with CTRL+X; now execute this one:

 sudo chmod +x /usr/bin/opentabletdriver

You're finally done! Launch OTD by typing:

 opentabletdriver

in your terminal e.e

Example:

osu! installer can't download files/XComposite error etc.

All these errors come from missing dependencies: make sure to install them all (see Wine and dependencies)

No sound when opening osu!

You probably only need to reboot or reload PipeWire by doing this:

sudo systemctl --user restart pipewire pipewire-pulse
sudo systemctl --user daemon-reload

Special thanks to:

1. KatouMegumi's guide: https://wiki.archlinux.org/title/User:Katoumegumi#osu!_(stable)_on_Arch_Linux

1. ThePoon's Discord server: https://discord.com/invite/thepoon

1. GonX's wine-osu builds: https://drive.google.com/drive/folders/17MVlyXixv7uS3JW4B-H8oS4qgLn7eBw5

1. hwsnemo's prepackaged wine-osu:
   https://software.opensuse.org//download.html?project=home%3Ahwsnemo%3Apackaged-wine-osu&package=wine-osu

1. l3lackShark's gosumemory: https://github.com/l3lackShark/gosumemory

And to everyone willing to help! :3

caaath wrote:

MarshNello wrote:

final result:


UPDATE: Guide is finally out on YouTube! Check it out here:
https://youtu.be/BdBcR8jfErc

A little introduction:
osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide, but thanks to PipeWire and to the latest custom builds it's actually even easier. Let's start 8^)

Prerequisites:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

 sudo apt update && sudo apt upgrade && sudo apt install git curl build-essential zstd

Arch Linux (Manjaro, Endeavour OS, etc.):

 sudo pacman -Syu git p7zip wget

Fedora:

 sudo dnf update 

 sudo dnf install git zstd p7zip p7zip-plugins wget 

 sudo dnf groupinstall "Development Tools" "Development Libraries" 

install wine and its dependencies:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

sudo dpkg --add-architecture i386
wget -nc https://dl.winehq.org/wine-builds/winehq.key
sudo apt-key add winehq.key
sudo apt-add-repository 'https://dl.winehq.org/wine-builds/ubuntu/'
sudo apt update
sudo apt install --install-recommends winehq-staging
sudo apt install winetricks

Arch Linux (Manjaro, Endeavour OS, etc.):

make sure to enable multilib first (https://i.imgur.com/DuLktxI.jpg)

sudo pacman -Sy
sudo pacman -S wine-staging winetricks
sudo pacman -S giflib lib32-giflib libpng lib32-libpng libldap lib32-libldap gnutls lib32-gnutls mpg123 lib32-mpg123 openal lib32-openal v4l-utils lib32-v4l-utils libpulse lib32-libpulse alsa-plugins lib32-alsa-plugins alsa-lib lib32-alsa-lib libjpeg-turbo lib32-libjpeg-turbo libxcomposite lib32-libxcomposite libxinerama lib32-libxinerama ncurses lib32-ncurses opencl-icd-loader lib32-opencl-icd-loader libxslt lib32-libxslt libva lib32-libva gtk3 lib32-gtk3 gst-plugins-base-libs lib32-gst-plugins-base-libs vulkan-icd-loader lib32-vulkan-icd-loader cups samba dosbox

Fedora:

 sudo dnf install alsa-plugins-pulseaudio.i686 glibc-devel.i686 glibc-devel libgcc.i686 libX11-devel.i686 freetype-devel.i686 libXcursor-devel.i686 libXi-devel.i686 libXext-devel.i686 libXxf86vm-devel.i686 libXrandr-devel.i686 libXinerama-devel.i686 mesa-libGLU-devel.i686 mesa-libOSMesa-devel.i686 libXrender-devel.i686 libpcap-devel.i686 ncurses-devel.i686 libzip-devel.i686 lcms2-devel.i686 zlib-devel.i686 libv4l-devel.i686 libgphoto2-devel.i686 cups-devel.i686 libxml2-devel.i686 openldap-devel.i686 libxslt-devel.i686 gnutls-devel.i686 libpng-devel.i686 flac-libs.i686 json-c.i686 libICE.i686 libSM.i686 libXtst.i686 libasyncns.i686 liberation-narrow-fonts.noarch libieee1284.i686 libogg.i686 libsndfile.i686 libuuid.i686 libva.i686 libvorbis.i686 libwayland-client.i686 libwayland-server.i686 llvm-libs.i686 mesa-dri-drivers.i686 mesa-filesystem.i686 mesa-libEGL.i686 mesa-libgbm.i686 nss-mdns.i686 ocl-icd.i686 pulseaudio-libs.i686 sane-backends-libs.i686 tcp_wrappers-libs.i686 unixODBC.i686 samba-common-tools.x86_64 samba-libs.x86_64 samba-winbind.x86_64 samba-winbind-clients.x86_64 samba-winbind-modules.x86_64 mesa-libGL-devel.i686 fontconfig-devel.i686 libXcomposite-devel.i686 libtiff-devel.i686 openal-soft-devel.i686 mesa-libOpenCL-devel.i686 opencl-utils-devel.i686 alsa-lib-devel.i686 gsm-devel.i686 libjpeg-turbo-devel.i686 pulseaudio-libs-devel.i686 pulseaudio-libs-devel gtk3-devel.i686 libattr-devel.i686 libva-devel.i686 libexif-devel.i686 libexif.i686 glib2-devel.i686 mpg123-devel.i686 mpg123-devel.x86_64 libcom_err-devel.i686 libcom_err-devel.x86_64 libFAudio-devel.i686 libFAudio-devel.x86_64

 sudo dnf groupinstall "C Development Tools and Libraries"

 sudo dnf groupinstall "Development Tools"

 sudo dnf install wine

(if you're using other distros, give this a look https://www.gloriouseggroll.tv/how-to-get-out-of-wine-dependency-hell/)

also make sure you installed the right drivers for your gpu:
https://github.com/lutris/docs/blob/master/InstallingDrivers.md

Let's begin from Latency:

Latency: Installing Pipewire

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

To install Pipewire on Debian, just follow these commands:

sudo add-apt-repository ppa:pipewire-debian/pipewire-upstream
sudo apt update
sudo apt install pipewire
sudo apt install libspa-0.2-bluetooth
sudo apt install pipewire-audio-client-libraries
systemctl --user daemon-reload
systemctl --user --now disable pulseaudio.service pulseaudio.socket
systemctl --user mask pulseaudio
systemctl --user --now enable pipewire-media-session.service pipewire pipewire-pulse

And then just reboot and you should be done.

Arch Linux (Manjaro, Endeavour OS, etc.):

Remove PulseAudio:

sudo pacman -Rdd pulseaudio

And install PipeWire:

sudo pacman -S pipewire pipewire-pulse pipewire-jack pipewire-alsa wireplumber

And then just reboot and you should be done.

Fedora:

Well, Fedora's latest versions already ship with Pipewire xD you might want to check doing this:

 sudo dnf install pulseaudio-utils

 pactl info

And if you see Server Name: PulseAudio (on PipeWire) you're good to go.

After doing this, you should be already done with Pipewire

Now let's install osu! and set up our Wine:

Installing osu! (All distros)

To install osu!, we'll just use Forefront's package on gitlab (https://gitlab.com/osu-wine/osu-wine). His package is the most stable one I've ever tried, so huge grats and credits to him e.e

Installing the game is just as simple as this:

git clone https://gitlab.com/osu-wine/osu-wine

cd osu-wine

sudo ./install.sh

osu-wine

The game is now working, but we need to change the Wine version to an osu! specific one.
To do this, let's download the wine-osu 7.0 package with gonX's patches from here:
https://drive.google.com/file/d/1xgJIe18ccBx6yjPcmBxDbTnS1XxwrAcc/view?usp=sharing

Once you've done that, you need to extract the package.
You can do it like this: (remember to change "Downloads" to your language's name if needed!)

cd ~/Downloads

tar -xf wine-osu-7.0-x86_64.pkg.tar.zst

Now let's copy the extracted folder to the /opt directory:

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

And let's edit the /etc/osu-wine.conf file:

sudo nano /etc/osu-wine.conf

Here, you need to uncomment the PATH line at the end, just like this:

## Path, DO NOT EDIT THIS VARIABLE, ONLY UNCOMMENT
PATH="/opt/wine-osu/bin:$PATH"

Once you've done this, just save with Ctrl+O and exit with Ctrl+X.
Now use this last command to copy the .conf file:

cp /etc/osu-wine.conf ~/.osu-wine.conf

Last but not least: run this to fix drag and drop songs:

sudo wget --no-check-certificate 'https://docs.google.com/uc?export=download&id=1Zu5vK-ACs1KhF4Rju1HAIIPb6XC42s9X' -O /usr/bin/osu-wine

The installation is now finished! You need just to open osu! and run it.

But before playing, the last thing you need to do is to set your universal offset to -25ms, so that your osu! will sound just like on Windows.



Warning: -25ms is what I generally recommend, but try to find your sweet spot from -40ms!

And you're done! You can now play osu!



Check the troubleshooting box if you need any help or just write me on Twitter (@MarshNello) [OS in the ss is Arch Linux GNOME]
And that's it! Enjoy playing osu! on your Linux!

Got any error? (GLIBC, Game not starting, input lag, random crashes etc.)
Check the box below:

Extra info and troubleshooting:

Open me \o/:

Game won't start/ntdll.so (GLIBC_2.32) error

This error actually occurs a lot when using Ubuntu or Debian-based distros. whose GLIBC isn't updated.
Before doing anything, upgrading your system might fix depending on your distro:

sudo apt update
sudo apt upgrade

If that didn't help, we will need to change some things xD

Assuming you've followed the guide until the end, let's delete wine-osu first.

sudo rm -rf /opt/wine-osu/

Let's now download another version, working on older GLIBCs as well.
Make sure curl is installed first:

sudo apt install curl

And now:

echo 'deb http://download.opensuse.org/repositories/home:/hwsnemo:/packaged-wine-osu/xUbuntu_20.04/ /' | sudo tee /etc/apt/sources.list.d/home:hwsnemo:packaged-wine-osu.list
curl -fsSL https://download.opensuse.org/repositories/home:hwsnemo:packaged-wine-osu/xUbuntu_20.04/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/home_hwsnemo_packaged-wine-osu.gpg > /dev/null
sudo apt update
sudo apt install wine-osu

You can now play perfectly fine e.e

(Instructions might change depending on your distro, you can check yourself here:
https://software.opensuse.org//download.html?project=home%3Ahwsnemo%3Apackaged-wine-osu&package=wine-osu)

Input lag/Compositing

First of all, if you're gaming on Linux make sure to install all the necessary dependencies listed above (see Wine and dependencies)

Otherwise, what really affects input lag is desktop compositing, which is active by default on many desktop environments even when gaming.
If you're using Lutris to run osu!, you can disable it from the rule as you can see here:
(thanks TheKej for the reply below <3)


If you are not, check the other box for "How to add osu! to Lutris" xd

How to add osu! to Lutris

If you don't know what Lutris is, just google it and install it for your own system (it's really simple).

Now, if you're never used Lutris before, open it and then run this command:

cd ~/.local/share/lutris/runners/ && mkdir wine

This will create our wine folder; then, let's copy the Wine version we downloaded beforehand here as well:

sudo cp -r /opt/wine-osu/ ~/.local/share/lutris/runners/wine

Close Lutris and open it again.
Click on the + button you can find on the top left of your Lutris and just write osu! (or whatever you want) in the name. For the runner instead, just choose Wine (click yes to whatever pops up). It should look like this:



After this, go on the "Game options" box and just set it up like this:

Executable:

~/.local/share/osu-wine/OSU/osu!.exe

Working directory:

~/.local/share/osu-wine/OSU

Wine prefix:

~/.local/share/osu-wine/WINE.win32

Example:



Now let's go to the "Runner options" box and here select "wine-osu":



Last but not least, let's disable our desktop effects aka compositor in "System options" (enable advanced options):



And we're done! You can now run your osu! through Lutris as well!

osu! disappears/crashes randomly

These random crashes have been a thing for many people as they depended on a wine bug, and what those have in common (besides System.AccessViolationException) is OSSOCK.select. As I've read on ThePoon's ds (ty openglfreak), this socket code crash has been fixed in the latest Wine 7.0-rc3, and also listed in Wine 7.0-rc4's bug fixes.



So I built Wine 7.0-rc4 with gonX's patches and it seems to work like a charm xD

Replacing it is really easy:
Delete your current wine-osu version:

sudo rm -rf /opt/wine-osu/

Then download the latest wine-osu here:
https://drive.google.com/file/d/14Ikp0x2vVPIy0wBcC2bPvTJSlaqCwfW9/view?usp=sharing

And just install it with the same commands as the guide:

cd ~/Downloads

tar -xf wine-osu-7.0-rc4_staging-1-x86_64.pkg.tar.zst

sudo cp -r ~/Downloads/opt/wine-osu/ /opt

Doing this should fix those crashes while playing, just let me know if it really works as I've never gotten many of them xD

For Mint/Ubuntu users with GLIBC error using the other package:

hwsnemo has already updated the wine-osu package to 7.0-rc3 so updating your system should do the thing (or just do all the steps in the box again).

Optimize your performance: Gamemode

Gamemode is a tool which might improve your gaming depending on your system: to install it and try it, follow the instructions spunout enjoyer wrote here: https://osu.ppy.sh/community/forums/topics/1248084?n=61
(great job <3)

If you notice your games are actually running worse than before, just disable its rule on Lutris/don't use it when starting the game.

Even lower latency: gonX's PipeWire settings

If after installing osu! your latency sounds strange and you want an even lower one, we'll apply gonX's PipeWire "patch" (credits to him and don't forget to thank him for the help he always delivers with others on ThePoon's discord <3)

First of all, to prevent any missing files, run this command:

 mkdir -p ~/.config/pipewire && cp -rv /usr/share/pipewire/* ~/.config/pipewire/ 

After doing this, you just need to edit the pipewire-pulse.conf file in ~/.config/pipewire/
I'll do it with nano:

sudo nano ~/.config/pipewire/pipewire-pulse.conf

Here, you might want to push your latency as far as possible: starting from 256, try to find the closest value to 32 which makes your sound stable/not cracking. It depends on your pc, there's not a "default" value xD
I'll use 32 as an example, so edit the file like this:

context.modules = {
    pulse.min.req = 32/48000              # 0.67ms
    pulse.min.quantum = 32/48000          # 0.67ms
}

Once you've done this, just save with Ctrl+O and exit with Ctrl+X.
Reboot, and the patch is done e.e

Moving your songs/skins from Windows

First of all, make sure you installed the ntfs-3g package needed to read Windows partitions:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

sudo apt install ntfs-3g

Arch Linux (Manjaro, Endeavour OS, etc.):

sudo pacman -Sy ntfs-3g

Fedora:

sudo dnf install ntfs-3g

Then, just copy the Skins and Songs folder to your Linux osu! folder, that you can find at:

~/.local/share/osu-wine/OSU

PP Counter for OBS: gosumemory

Gosumemory actually works perfectly with this osu! guide e.e
Let's start from downloading the latest release from GitHub (you obv need to download the Linux version): https://github.com/l3lackShark/gosumemory/releases/
I'll go with amd64 as my PC is 64bits.

Now let's extract the file in the gosumemory folder: (remember to change "Downloads" to your language's name if needed!)

 cd ~/Downloads && mkdir gosumemory

 unzip -q gosumemory_linux_amd64.zip -d ~/Downloads/gosumemory/

Let's now run gosumemory once with:

 cd ~/Downloads/gosumemory && chmod +x gosumemory

 sudo ./gosumemory

Ignore the error and edit this file:

 sudo nano ~/Downloads/gosumemory/config.ini

Here, you need to edit these 2 lines like this: (replace username with your own)

 wine = true 

 path = /home/username/.local/share/osu-wine/OSU/Songs

Save with CTRL+O and exit with CTRL+X.

Our gosumemory is now working, but let's create a script to launch it whenever we want:

 sudo nano /usr/bin/gosumemory

Here, just paste these commands:

 #!/bin/sh

cd ~/Downloads/gosumemory
sudo ./gosumemory

And now just launch this one:

 sudo chmod +x /usr/bin/gosumemory

And we're done! You can now launch gosumemory whenever you want by just typing:

 gosumemory

in your terminal! e.e

Last thing to do is: adding it to OBS.
Here, I reccommend y'all to use the Snap version of OBS (https://snapcraft.io/obs-studio) as it provides everything you might need for streaming.
Now open your osu!, launch gosumemory and then open your browser at this link: http://127.0.0.1:24050

Here you should see all the different overlays available: let's say I choose this one



You need to copy that link and paste in it OBS > Sources > Browser like this:



And you're done! PP Counter is finally working xD

Tablet drivers on Linux: OpenTabletDriver (+ Fedora install)

OpenTabletDriver is the perfect alternative to any tablet driver.
Follow its guide to install it:
https://opentabletdriver.net/Wiki/Install/Linux

Fedora isn't supported yet as of right now, so you need to compile it from source to actually use it. It's a bit long, but I wrote every step here e.e:

Fedora instructions

Compiling OTD from source

Let's start from dependencies: (most of them should be already installed)

 sudo dnf install libX11 libXrandr libevdev gtk3 bash

Let's now install .NET 6 SDK which isn't available in repositories yet xd
Follow these commands:

 cd && wget https://download.visualstudio.microsoft.com/download/pr/17b6759f-1af0-41bc-ab12-209ba0377779/e8d02195dbf1434b940e0f05ae086453/dotnet-sdk-6.0.100-linux-x64.tar.gz && mkdir dotnet

 tar zxf dotnet-sdk-6.0.100-linux-x64.tar.gz -C dotnet/

 export PATH=$PATH:$HOME/dotnet

Last thing to do is to build OpenTabletDriver:

 git clone https://github.com/OpenTabletDriver/OpenTabletDriver.git && cd OpenTabletDriver/

 chmod +x build.sh

Now replace username with your own:

 sudo env "PATH=$PATH:/home/username/dotnet/" ./build.sh

 chmod +x generate-rules.sh

 sudo env "PATH=$PATH:/home/username/dotnet/" ./generate-rules.sh

 sudo mv ./bin/99-opentabletdriver.rules /etc/udev/rules.d/

Let's now create a script to launch OTD:

OTD Scripts

Let's start:

 sudo nano /usr/bin/otd

Here, you need to paste this: (change username with your own)

 !/bin/bash
cd /home/username/OpenTabletDriver/OpenTabletDriver.UX.Gtk/bin/Release/net6.0/linux-x64
export PATH=$PATH:$HOME/dotnet
dotnet ./OpenTabletDriver.UX.Gtk.dll "$@"

Save with CTRL+O and exit with CTRL+X; now execute this one:

 sudo chmod +x /usr/bin/otd

Let's now create a script to launch the OTD daemon:

 sudo nano /usr/bin/otddaemon

Paste this: (change username with your own)

 #!/bin/bash
cd /home/username/OpenTabletDriver/bin
export PATH=$PATH:$HOME/dotnet
if [ $# -eq 0 ]
then
    if [[ ! -v DISPLAY ]] && [[ ! -v WAYLAND_DISPLAY ]]
    then
        echo "DISPLAY and/or WAYLAND_DISPLAY is not set"
        exit 64
    fi
    dotnet ./OpenTabletDriver.Daemon.dll -c ./Configurations
else
    dotnet ./OpenTabletDriver.Console.dll "$@"
fi

Now just run this:

 sudo chmod +x /usr/bin/otddaemon

Our two scripts are now finally set up; let's create the last one to launch both together:

 sudo nano /usr/bin/opentabletdriver

Here, just paste this:

 #!/bin/bash
otddaemon &
P1=$!
otd &
P2=$!
wait $P1 $P2

Save with CTRL+O and exit with CTRL+X; now execute this one:

 sudo chmod +x /usr/bin/opentabletdriver

You're finally done! Launch OTD by typing:

 opentabletdriver

in your terminal e.e

Example:

osu! installer can't download files/XComposite error etc.

All these errors come from missing dependencies: make sure to install them all (see Wine and dependencies)

No sound when opening osu!

You probably only need to reboot or reload PipeWire by doing this:

sudo systemctl --user restart pipewire pipewire-pulse
sudo systemctl --user daemon-reload

Special thanks to:

1. KatouMegumi's guide: https://wiki.archlinux.org/title/User:Katoumegumi#osu!_(stable)_on_Arch_Linux

1. ThePoon's Discord server: https://discord.com/invite/thepoon

1. GonX's wine-osu builds: https://drive.google.com/drive/folders/17MVlyXixv7uS3JW4B-H8oS4qgLn7eBw5

1. hwsnemo's prepackaged wine-osu:
   https://software.opensuse.org//download.html?project=home%3Ahwsnemo%3Apackaged-wine-osu&package=wine-osu

1. l3lackShark's gosumemory: https://github.com/l3lackShark/gosumemory

And to everyone willing to help! :3

Hello, I finished installing osu. But when I try to run it gives me this error "wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)"

Kolmas wrote:

MarshNello wrote:

Kolmas wrote:

mqwilliamscom wrote:

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

Dude you are a life saver. Works like a charm now.

Edit: all that's left is to figure out how to transfer my beatmaps and skins over to this device. Should be a piece of cake

This happens to me just today (things are fine yesterday even after two reboot and a system update) , turning on audio compatibility mode does solve the audio issue but whenever i tried to play a map or watch a replay, it will stuck and jitter on the first note then straight up crashing the game and shows the following error code

01b0:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc55046

latest pipewire broke something here too a.a try to revert with downgrade

downgrading from 0.3.44 to 0.3.43 works, thx for the tip

AnjoK wrote:

Kolmas wrote:

MarshNello wrote:

Kolmas wrote:

mqwilliamscom wrote:

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

Dude you are a life saver. Works like a charm now.

Edit: all that's left is to figure out how to transfer my beatmaps and skins over to this device. Should be a piece of cake

This happens to me just today (things are fine yesterday even after two reboot and a system update) , turning on audio compatibility mode does solve the audio issue but whenever i tried to play a map or watch a replay, it will stuck and jitter on the first note then straight up crashing the game and shows the following error code

01b0:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc55046

latest pipewire broke something here too a.a try to revert with downgrade

downgrading from 0.3.44 to 0.3.43 works, thx for the tip

I'm a bit new to linux and i tried to figure out how to downgrade but couldn't. Could someone tell me how to do that?

AnjoK wrote:

Kolmas wrote:

MarshNello wrote:

Kolmas wrote:

mqwilliamscom wrote:

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

Dude you are a life saver. Works like a charm now.

Edit: all that's left is to figure out how to transfer my beatmaps and skins over to this device. Should be a piece of cake

This happens to me just today (things are fine yesterday even after two reboot and a system update) , turning on audio compatibility mode does solve the audio issue but whenever i tried to play a map or watch a replay, it will stuck and jitter on the first note then straight up crashing the game and shows the following error code

01b0:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc55046

latest pipewire broke something here too a.a try to revert with downgrade

downgrading from 0.3.44 to 0.3.43 works, thx for the tip

I'm a bit new to linux and i tried to figure out how to downgrade but couldn't. Could someone tell me how to do that?

iZaIxSP wrote:

Hello

The last wine-osu build (7.1-1) broke and osu! just stalls at the splash screen.

Doing a timeshift rollback dind't help, so I tried redoing the whole process in the OP from scratch and got not just the same, but worse result, albeit a lil funny.
Wine would open so many instances of explorer.exe that I had to enter a console to kill the process because it would use nearly 100% of the cpu and memory.
After a reboot it would simply just crash on launch, here's the terminal's output

I'm running Linux Mint 20.3 (MATE), I'm very much certain that Pipewire hasn't broken anything since I kept it at version 0.3.42. (not upgrading it because can't downgrade with apt) and drivers are all up to date.

Should I just wait for an update or is this by fixable in some form?

oh by the way, tyvm to the author of this guide, its been really helpful and taught me few useful commands

GGTyler wrote:

AnjoK wrote:

Kolmas wrote:

MarshNello wrote:

Kolmas wrote:

mqwilliamscom wrote:

AnjoK wrote:

mqwilliamscom wrote:

I followed the instructions to the T [including the Game won't start/ntdll.so (GLIBC_2.32) error]. The game starts but it runs too fast and the audio crackles a bit. It sounds exactly like this:

https://www.youtube.com/watch?v=kYhxZGzDe5w

How to fix? I'm running Ubuntu 20.04

Turning on audio compatibility mode fixes the issue for me.

It started happening suddenly even tho it worked fine for a while. Reinstalling didn't help the issue still occurs, and after reinstalling both the os and the game, japanese characters are shown as boxes and the game crashes randomly and with specific beatmaps, re-downloading the beatmaps seems to fix this issue tho i tested it on windows with the same files and it works fine. I followed all of the troubleshooting steps to no avail.

Running Pop!OS 21.10.

Dude you are a life saver. Works like a charm now.

Edit: all that's left is to figure out how to transfer my beatmaps and skins over to this device. Should be a piece of cake

This happens to me just today (things are fine yesterday even after two reboot and a system update) , turning on audio compatibility mode does solve the audio issue but whenever i tried to play a map or watch a replay, it will stuck and jitter on the first note then straight up crashing the game and shows the following error code

01b0:err:seh:NtRaiseException Unhandled exception code c0000005 flags 0 addr 0x7bc55046

latest pipewire broke something here too a.a try to revert with downgrade

downgrading from 0.3.44 to 0.3.43 works, thx for the tip

I'm a bit new to linux and i tried to figure out how to downgrade but couldn't. Could someone tell me how to do that?

Bit of a newbie too, so there's probably a better way to do this, but here's all the .deb files for 0.3.43.
You'll need to download all the ones you have, and downgrade them all using dpkg -i "filename"
If it still doesn't work, enable audio compatibility in osu!, that's what got it to work for me

oh, also, apparently this uninstalls pipewire-media-session. for me at least. just install and enable it again like normal.

AnjoK wrote:

Tho I'm still lacking japanese characters...

DaSidKay wrote:

I don't know why but when I try to run Osu on linux, it just displays the logo then it disappears and nothing else happens. Is there a way to fix this?

(Sorry, I'm still a linux noob)


Edit: NVM, Fixed it. I'm just dumb lol

Kolmas wrote:

AnjoK wrote:

Tho I'm still lacking japanese characters...

for the japanese characters part you can install meiryo font yourself, but korean/chinese characters still seems to be not working

MarshNello wrote:

That is doable by downloading Windows 10’s iso (which is free), extracting install.wim and then copy the fonts into “Fonts” to /usr/share/Fonts

I’ll maybe do a post about it

cd ~/Downloads
7z e Win10_*.iso sources/install.wim
7z x install.wim 1/Windows/Fonts
sudo cp -r 1/Windows/Fonts /usr/share/fonts/WindowsFonts
sudo chmod -R 755 /usr/share/fonts/WindowsFonts
sudo fc-cache -f