show more
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"Jyxle"

Jyxle wrote:

I downloaded the zip file, but it says it's damaged and cannot be opened. When you say copy and paste the command, do you mean in Terminal? I have no idea what you mean when you said to paste it onto the osu! application. When I typed the command into Terminal, it just asked for a 'Password: " with a key symbol. How do I fix this?


Update: I disabled system integrity and I've run the command, it said no such file. (where can I find your osu! or Wineskin will not open! guide?) osu! still says its damaged, can't be opened, and that I should move it to the bin.

I don't see how the Wineskin thing plays into the installment. I have the unofficial one you provided downloaded.

I've included the guide in my signature. You can also find the guide in the first post of this thread. The password won't show up when you type it in but it will still be registered. Press enter after you've typed it in. The command will also fix the damaged error.

The working directory of your Terminal is likely not in the same place as your osu! file. There are more detailed steps on this in my guide.
Paydru
27 posts
Joined February 2015
Paydru
is anyone else experiencing slight cursor delay? or is it just me
Last edited by Paydru , edited 1 time in total.
Jyxle
8 posts
Joined October 2018
Jyxle
It's working now. I got some errors after running the command in Terminal, but it seems like osu! is still working fine with them. Here's what popped up if you want to look into it

Thanks!

xattr: [Errno 30] Read-only file system: 'osu!.app/Contents/Resources/dosdevices/z:'
xattr: No such file: osu!.app/Contents/Resources/dosdevices/d:
xattr: No such file: osu!.app/Contents/Resources/dosdevices/d::
xattr: No such file: osu!.app/Contents/Frameworks/libidn.11.dylib
Last edited by Jyxle , edited 1 time in total.
thaiboy digital
23 posts
Joined November 2017
thaiboy digital
i had "install from anywhere" enabled and i still had to do the sudo thingy, and every time i start up osu, it shows a "osu! crashed" message, then "updating", then starts up the game. other then that, its working fine
LOVINGK9Z
1 post
Joined July 2019
LOVINGK9Z
Hey! When I download the extraction thingy, it just installs Osu onto my computer. When I click on Osu it gives me an error saying "osu! is damaged and can't be opened. You should move it to the Trash."

Did I do anything wrong?

Edit: I entered the command into a blank terminal, it asked for a password and then said "felixmayhew is not in the sudoers file. This incident will be reported."

I'm fairly lost and could use some help, I don't have any clue what I'm doing.
Last edited by LOVINGK9Z , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
felixohno

felixohno wrote:

Hey! When I download the extraction thingy, it just installs Osu onto my computer. When I click on Osu it gives me an error saying "osu! is damaged and can't be opened. You should move it to the Trash."

Did I do anything wrong?

Follow this section: osu! or Wineskin will not open! in my guide.

felixohno wrote:

Edit: I entered the command into a blank terminal, it asked for a password and then said "felixmayhew is not in the sudoers file. This incident will be reported."

I've never come across that before. Are there multiple users on your machine? You may need to run the command as the main user.
Last edited by Technocoder , edited 2 times in total.
DeclanIdiot
3 posts
Joined February 2018
DeclanIdiot

Technocoder wrote:

"- Ephemeral -"

- Ephemeral - wrote:

I redownloaded the osu! Catalina build, but this time, it told me that '"osu!" is damaged and can't be opened. You should move it to the Trash." So I deleted this new version and tried to reopen the first version that I downloaded.

Using this first version, I tried manually installing the .NET Framework using your steps, but it gave me another error. The following pastebin link has the error messages and information you requested in your reply.

https://pastebin.com/GMbyJETa

You have ran this command right? sudo xattr -dr com.apple.quarantine 'osu!.app'
This needs to run on the osu! application each time it is downloaded. If you get the message xattr: No such file it means you have not set the working directory in Terminal correctly (the steps in my guide go into more detail). This is most likely the reason why you get "osu! is damaged and can't be opened". I suggest you try downloading it again.

I found this interesting error in the logs: wine: Bad CPU type in executable which seems to suggest that you're not using the Catalina build for some reason? It might just be an issue with winetricks.

There is a failure when osu! tries to update: _pending\osu!.exe => osu!.exe: FAIL. You can try updating osu! manually (there is a set of steps in my guide for this). There's also the error: No available GL context found.. Have you managed to get osu! on Wineskin working before? It might be that your graphics card is too old (I don't know what model of computer you have) but that seems unlikely.


So, hi I tried putting in the command into terminal- and you're right, it said that there is no such file, and I checked your guide and I didn't see how to fix it. Can you please tell me what I'm doing wrong or how to fix it?
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"ErzaDrago"

ErzaDrago wrote:

So, hi I tried putting in the command into terminal- and you're right, it said that there is no such file, and I checked your guide and I didn't see how to fix it. Can you please tell me what I'm doing wrong or how to fix it?

It is under the section osu! or Wineskin will not open!.
Specifically, you need to move the osu! application to the desktop and then type cd Desktop in Terminal first before running the command.
_fluffyy
61 posts
Joined July 2018
_fluffyy
Hey, I'm having a bit of an issue with my cursor. Sometimes it can't keep up with where my mouse actually is. When I'm in full screen, it only happens in the editor. When I'm not, however, it happens everywhere. Is there a fix? (I'm on cutting edge BTW)
EDIT: fixed by itself somehow
Last edited by _fluffyy , edited 1 time in total.
DeclanIdiot
3 posts
Joined February 2018
DeclanIdiot

Technocoder wrote:

"ErzaDrago"

ErzaDrago wrote:

So, hi I tried putting in the command into terminal- and you're right, it said that there is no such file, and I checked your guide and I didn't see how to fix it. Can you please tell me what I'm doing wrong or how to fix it?

It is under the section osu! or Wineskin will not open!.
Specifically, you need to move the osu! application to the desktop and then type cd Desktop in Terminal first before running the command.

so, i did move it to applications, it says there is no such file :(
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

ErzaDrago wrote:

so, i did move it to applications, it says there is no such file :(

To the desktop.
_fluffyy
61 posts
Joined July 2018
_fluffyy

Paydru wrote:

is anyone else experiencing slight cursor delay? or is it just me

yea I have been too. For some reason it's everywhere when I'm not in full screen, but only in edit mode when I am. Is it the same for you?
Botanist2008
5 posts
Joined January 2020
Botanist2008
uhh

whenever anybody who knows what is going on with this,
I have the experimental Catalina version Technocoder posted and I did the sudo xattr -dr com.apple.quarantine 'osu!.app' and all that stuff, it worked, but osu crashes while it is opening
(I disabled SIP as well)


this is the error I got:


System.ComponentModel.Win32Exception (0x80004005): Internal error
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at #=zfx4YmktRjFRJMjRCIw==.#=z21atl_k=(Boolean #=zz37TCDhPZt7T, Exception #=zd$QcV_I=)
at #=zECDBzTWwbaPTpTsrQb0uALU=.#=zzgK5Nt5FWiHc(Object #=zyyMutHw=, EventArgs #=zd$QcV_I=)
at System.Windows.Forms.ButtonBase.OnKeyUp(KeyEventArgs kevent)
at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)
at System.Windows.Forms.Control.WmKeyChar(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Last edited by Botanist2008 , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"Botanist2008"

Botanist2008 wrote:

uhh

whenever anybody who knows what is going on with this,
I have the experimental Catalina version Technocoder posted and I did the sudo xattr -dr com.apple.quarantine 'osu!.app' and all that stuff, it worked, but osu crashes while it is opening
(I disabled SIP as well)


this is the error I got:


System.ComponentModel.Win32Exception (0x80004005): Internal error
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at #=zfx4YmktRjFRJMjRCIw==.#=z21atl_k=(Boolean #=zz37TCDhPZt7T, Exception #=zd$QcV_I=)
at #=zECDBzTWwbaPTpTsrQb0uALU=.#=zzgK5Nt5FWiHc(Object #=zyyMutHw=, EventArgs #=zd$QcV_I=)
at System.Windows.Forms.ButtonBase.OnKeyUp(KeyEventArgs kevent)
at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)
at System.Windows.Forms.Control.WmKeyChar(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


Going by the pattern of error messages I would really recommend that you check the System Integrity Protection is still disabled by typing csrutil status in Terminal. Otherwise, if it is disabled, the only other option at this stage is to try opening osu! repeatedly (and pressing restart when it crashes) until it works.
jjini
2 posts
Joined September 2019
jjini
First of all, a big thank you to Technocoder for putting in the time and energy for making osu! work on macOS and trying to solve player's issues! Seriously, thank you!

My experience using the posted Wineskin on macOS Mojave has been pretty good. There are always some hiccups shortly after starting osu! but I can obviously deal with that. But regularly (about once in 1 to 2 hours) I have serious lag, sometimes to the point that I can't get more than 5 to 15 FPS. Restarting doesn't help. I just have to wait a few minutes and then it gets better.
It seems, the process "tccd" is eating up a LOT of CPU during that time. I have read in forums that this issue has been solved with newer unofficial wineskin releases on portingteam's website. Clicking on the Wineskin app and going to advanced reveals I have "Wrapper Version: Wineskin 2.6.2" and "Engine: WS9Wine2.22". Updating the wrapper under Tools does not work.
I am very much a novice when it comes to his stuff, so forgive me, if I am being stupid:
Can I just download the latest version from portingteam's website and replace the "Wineskin" file, that is visible when "showing package contents" of the osu! application? Do you think that could actually help or should I try something else?
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"jjini"

jjini wrote:

First of all, a big thank you to Technocoder for putting in the time and energy for making osu! work on macOS and trying to solve player's issues! Seriously, thank you!

My experience using the posted Wineskin on macOS Mojave has been pretty good. There are always some hiccups shortly after starting osu! but I can obviously deal with that. But regularly (about once in 1 to 2 hours) I have serious lag, sometimes to the point that I can't get more than 5 to 15 FPS. Restarting doesn't help. I just have to wait a few minutes and then it gets better.
It seems, the process "tccd" is eating up a LOT of CPU during that time. I have read in forums that this issue has been solved with newer unofficial wineskin releases on portingteam's website. Clicking on the Wineskin app and going to advanced reveals I have "Wrapper Version: Wineskin 2.6.2" and "Engine: WS9Wine2.22". Updating the wrapper under Tools does not work.
I am very much a novice when it comes to his stuff, so forgive me, if I am being stupid:
Can I just download the latest version from portingteam's website and replace the "Wineskin" file, that is visible when "showing package contents" of the osu! application? Do you think that could actually help or should I try something else?


I don't know if replacing the Wineskin application will actually work without any issues. I'm inclined to believe that it will work but if you want to do this I suggest you save the original Wineskin file somewhere so that if it doesn't you can easily replace it.

Alternatively, both peppy's July 2019 build and my Catalina build (based on peppy's) and I believe slc's December 2018 build uses Unofficial Wineskin with the newer engines that fix the tccd issue so you could try using those instead (and dragging over your data to the newer Wineskin wrapper). Just keep in mind that for peppy's Wineskin and my Catalina build you must follow the steps: osu! or Wineskin will not open! in my guide.
Botanist2008
5 posts
Joined January 2020
Botanist2008
technocoder, its complaining about a .NET framework
"This application could not be started. You must enable the .NET framework from the Windows Features dialog box (from Control Panel, choose Programs, turn Windows features on or off).

uhhh help lol
Last edited by Botanist2008 , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"Botanist2008"

Botanist2008 wrote:

technocoder, its complaining about a .NET framework
"This application could not be started. You must enable the .NET framework from the Windows Features dialog box (from Control Panel, choose Programs, turn Windows features on or off).

uhhh help lol

Here's what I've suggested to another person who had the same issue:

Technocoder wrote:

"- Ephemeral -"

- Ephemeral - wrote:

I'm having an issue opening the application, even after disabling the System Integrity Protection on my laptop. It keeps bringing up this issue about the .NET framework.

"This application could not be started. You must enable the .NET Framework from the Windows Features dialog box (from Control Panel, choose Programs, Turn Windows features on or off). Do you want to view information about this issue?"

That's certainly a strange error to be getting. I know this sounds rather dumb but it might be worth downloading the file again just in case it was a one off error. If that doesn't work check if there are any files in Show Package Contents > drive_c > osu! > Songs > Logs. If there are, paste the contents of those files here (preferably in a pastebin).

It seems that there's an option to view information about the issue as well. Paste that information here as well if you can. Otherwise, you can try installing the .NET Framework manually (although I don't know if that will help):
Steps
  1. Open Wineskin from Show Package Contents
  2. Click on Advanced > Tools > Winetricks
  3. Click on dlls and check the box next to dotnet40 (theoretically, there should be a mark in the Installed column as well)
  4. Click on Run


If that still doesn't work, run my troubleshooting tool: https://osu.ppy.sh/community/forums/topics/1036678 and paste the report here.
Last edited by Technocoder , edited 1 time in total.
iNotritious
1 post
Joined December 2019
iNotritious
I Still can't open osu! with this update that came out for macOS called catalina, and im having trouble still opening osu

Is there any solution to this?
hbumaze
2 posts
Joined April 2019
hbumaze

iNotritious wrote:

I Still can't open osu! with this update that came out for macOS called catalina, and im having trouble still opening osu

Is there any solution to this?

your best bet is either running Bootcamp or installing Osu!Lazer.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

iNotritious wrote:

I Still can't open osu! with this update that came out for macOS called catalina, and im having trouble still opening osu

Is there any solution to this?

Run my troubleshooting tool: https://osu.ppy.sh/community/forums/topics/1036678 and paste the report here.
Botanist2008
5 posts
Joined January 2020
Botanist2008
technocoder, I'm getting an error message saying Error moving the file: you can't save the file "system.reg" because the volume "Macintosh HD" is read only.
(this applies for files other than "system.reg"
(this is after I checked the dotnet40 in the wineskin and hit run)
im
Jia Qian
2 posts
Joined March 2016
Jia Qian
I can't open the application. After right click then click "Open",nothing happen. Is there any soulution?
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

Jia Qian wrote:

I can't open the application. After right click then click "Open",nothing happen. Is there any soulution?

Run my troubleshooting tool: https://osu.ppy.sh/community/forums/topics/1036678 and paste the report here or follow the steps in the section: osu! or Wineskin will not open! from my troubleshooting guide.
SchokiEllen
1 post
Joined January 2013
SchokiEllen
Worked fine for me! Thank you very much!! <3
JohnnyRO
2 posts
Joined December 2015
JohnnyRO

Technocoder wrote:

"- Ephemeral -"

- Ephemeral - wrote:

Okay, got it on my laptop. Is there a way to transfer skins? I tried to move my skins and songs to the new osu! folder, but the crossover application said there "is no windows application configured to open this file" when I tried to open the game with the new skin.

Drag your skins into the skins folder (Show Package Contents > drive_c > osu! > Skins). Alternatively, perform the sections How to do a data backup on the old Wineskin and How to restore a data backup on the new Wineskin from my guide.

How Do I add new maps/songs in? I have tried dragging the downloaded .osz files in the "songs" folder but nothing happens. The existing songs are each under a different folder containing all the components of the map.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Press F5 (or Fn + F5) when you're in game to load the beatmaps.
Last edited by Technocoder , edited 1 time in total.
Paydru
27 posts
Joined February 2015
Paydru
is anyone else getting big delay? or is it just me
hbumaze
2 posts
Joined April 2019
hbumaze
Could you help me? Whenever I try opening the app it just says that the file is damaged. Also, whenever I run the command sudo xattr -dr com.apple.quarantine 'osu!.app'it just says no such file: osu!.app
haxax
1 post
Joined June 2018
haxax
First thank you so much for making osu! work again on catalina. I am able to run osu! after following all the steps but whenever I open the app it first crashes, then updates the game client and starts normally afterwards. I ran the troubleshooter too and there are no errors.

This is the error message I get whenever osu! crashes and asks me to restart:

System.BadImageFormatException: Bad format. (Exception from HRESULT: 0x8007000B)
at #=zRWfUnGWu3dupv3GcaidhrEM=.#=zo_VpCR76ldxajeamow==(Int32 #=z3Ymp2q8=, #=zI$lBDALgiBWzhnt6J_ek3LgQswInPZ5h9nThwu5xsPeX& #=zHYO6oZA=)
at #=zRWfUnGWu3dupv3GcaidhrEM=.#=zWbpV7bNcN$Hc5dOmTA==(Int32 #=z3Ymp2q8=, #=zhixrP2TuQ0j1Eo_vBIUOMkbQfpkpsUwqgvhOsZE= #=zHYO6oZA=)
at #=zRWfUnGWu3dupv3GcaidhrEM=.#=zId51ukLOXUqhbFIwKg==()
at #=zMKA23i3ZQQe_MPyQtg==.#=zM1u_yUCUYqvU(String #=z62D1dlD72b1m, Boolean #=zDsB_wFk=)
at #=zOwH6k5vR7JpRdp$OGQ==.#=zc_f2Vpqd4bWY()
at #=zOwH6k5vR7JpRdp$OGQ==..ctor(String #=z92hvd3Q=)
at #=znEjmn$ghy7MB5$dGqA==.#=zaTahEecpvTTu(String #=zCGzszQwmnWPo, Boolean #=zAUV4BpbCymAhnSu1LTRgncc=, Boolean #=ziTHNh8xkdq3JmkAPng==)

It is honestly not a big issue as it restarts normally after updating the client but I am wondering what is causing this error.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"hbumaze"

hbumaze wrote:

Could you help me? Whenever I try opening the app it just says that the file is damaged. Also, whenever I run the command sudo xattr -dr com.apple.quarantine 'osu!.app'it just says no such file: osu!.app

You haven't placed the osu!.app in the right location or you haven't ran cd Desktop. If you still can't get it working, run my troubleshooter: https://osu.ppy.sh/community/forums/topics/1036678.

"haxax"

haxax wrote:

First thank you so much for making osu! work again on catalina. I am able to run osu! after following all the steps but whenever I open the app it first crashes, then updates the game client and starts normally afterwards. I ran the troubleshooter too and there are no errors.

This is the error message I get whenever osu! crashes and asks me to restart:

System.BadImageFormatException: Bad format. (Exception from HRESULT: 0x8007000B)
at #=zRWfUnGWu3dupv3GcaidhrEM=.#=zo_VpCR76ldxajeamow==(Int32 #=z3Ymp2q8=, #=zI$lBDALgiBWzhnt6J_ek3LgQswInPZ5h9nThwu5xsPeX& #=zHYO6oZA=)
at #=zRWfUnGWu3dupv3GcaidhrEM=.#=zWbpV7bNcN$Hc5dOmTA==(Int32 #=z3Ymp2q8=, #=zhixrP2TuQ0j1Eo_vBIUOMkbQfpkpsUwqgvhOsZE= #=zHYO6oZA=)
at #=zRWfUnGWu3dupv3GcaidhrEM=.#=zId51ukLOXUqhbFIwKg==()
at #=zMKA23i3ZQQe_MPyQtg==.#=zM1u_yUCUYqvU(String #=z62D1dlD72b1m, Boolean #=zDsB_wFk=)
at #=zOwH6k5vR7JpRdp$OGQ==.#=zc_f2Vpqd4bWY()
at #=zOwH6k5vR7JpRdp$OGQ==..ctor(String #=z92hvd3Q=)
at #=znEjmn$ghy7MB5$dGqA==.#=zaTahEecpvTTu(String #=zCGzszQwmnWPo, Boolean #=zAUV4BpbCymAhnSu1LTRgncc=, Boolean #=ziTHNh8xkdq3JmkAPng==)

It is honestly not a big issue as it restarts normally after updating the client but I am wondering what is causing this error.

Sorry, but I don't know what causes the error (other than the generic error message that describes a corrupted osu!.exe file). The Catalina Wine engine is still very new so it's likely that crashes like these will be fixed in a future update to the engine.
Botanist2008
5 posts
Joined January 2020
Botanist2008
technocoder, I'm getting an error message saying Error moving the file: you can't save the file "system.reg" because the volume "Macintosh HD" is read only.
(this applies for files other than "system.reg"
(this is after I checked the dotnet40 in the wineskin and hit run)


I need help lol



also if you know an easy way to just straight up downgrade to High Sierra/Sierra that would be awesome so I don't have to deal with all this
_fluffyy
61 posts
Joined July 2018
_fluffyy
osu! refuses to open. I've used the macOS client and done all the troubleshooting, but nothing works.
client report

Version 10.13.6 (Build 17G11023)
Engine: WS9Wine2.22
Wineskin 2.6.2
Release: CuttingEdge
Quarantine attribute is absent
Detect Direct3D is disabled
Compatibility mode is disabled
Razer Synapse is absent
System Integrity Protection is enabled
Engine version is supported
No errors in: update.log
No errors in: runtime.log
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"Botanist2008"

Botanist2008 wrote:

technocoder, I'm getting an error message saying Error moving the file: you can't save the file "system.reg" because the volume "Macintosh HD" is read only.
(this applies for files other than "system.reg"
(this is after I checked the dotnet40 in the wineskin and hit run)


I need help lol



also if you know an easy way to just straight up downgrade to High Sierra/Sierra that would be awesome so I don't have to deal with all this

Sorry, I don't know how to fix your issue. My only guess is that the quarantine attribute hasn't been fully erased. Try running my troubleshooter on it if you haven't already. The only way I know of to downgrade to High Sierra requires reinstalling your entire system which is not exactly "easy".

"_fluffyy"

_fluffyy wrote:

osu! refuses to open. I've used the macOS client and done all the troubleshooting, but nothing works.

I know you're not using macOS Catalina but try using my experimental Catalina build: community/forums/posts/7367239. It uses an updated Wine engine which is likely to work better. Note that you do not need to follow the steps for disabling System Integrity Protection. Make sure to run my troubleshooter on it as well to remove the quarantine attribute.
Last edited by Technocoder , edited 3 times in total.
kiadeiaz
5 posts
Joined October 2015
kiadeiaz
i'm using mojave. macbook air, mid 2013.

my osu crashes when opened with this error message after the latest update.
the error message reads; osu! was unable to obtain a graphics context. If this is the first time you've seen this, please try restarting your PC. If this is a fresh install, you may be missing graphics drivers.

https://imgur.com/3XIanyh

https://imgur.com/fdo1zdS

when clicking restart osu!, it will proceed to update the client, then say the client is up to date, process repeats with crash and same error message.
obviously i've tried restarting multiple times lol

i've tried the solutions in the osu thread with no result (replacing the osu!.exe file with osu!install.exe renamed to osu!.exe, etc.). in hopes that maybe those solutions would work for me.

i don't use wine with osu, but when osu worked (before the latest update), it ran perfectly fine with no flaws, crashes, frame drop, etc. should i install wine? or reinstall osu?
Last edited by kiadeiaz , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"kiadeiaz"

kiadeiaz wrote:

i'm using mojave. macbook air, mid 2013.

my osu crashes when opened with this error message after the latest update.
the error message reads; osu! was unable to obtain a graphics context. If this is the first time you've seen this, please try restarting your PC. If this is a fresh install, you may be missing graphics drivers.

https://imgur.com/3XIanyh

https://imgur.com/fdo1zdS

when clicking restart osu!, it will proceed to update the client, then say the client is up to date, process repeats with crash and same error message.
obviously i've tried restarting multiple times lol

i've tried the solutions in the osu thread with no result (replacing the osu!.exe file with osu!install.exe renamed to osu!.exe, etc.). in hopes that maybe those solutions would work for me.

i don't use wine with osu, but when osu worked (before the latest update), it ran perfectly fine with no flaws, crashes, frame drop, etc. should i install wine? or reinstall osu?

Same advice I would suggest trying:

Technocoder wrote:

I know you're not using macOS Catalina but try using my experimental Catalina build: community/forums/posts/7367239. It uses an updated Wine engine which is likely to work better. Note that you do not need to follow the steps for disabling System Integrity Protection. Make sure to run my troubleshooter on it as well to remove the quarantine attribute.


Otherwise, if it really is a problem with the latest update you can try downloading the Wineskin again and included inside it will be an older osu!.exe that you can copy over and see if it works.
Last edited by Technocoder , edited 1 time in total.
kiadeiaz
5 posts
Joined October 2015
kiadeiaz

Technocoder wrote:

"kiadeiaz"

kiadeiaz wrote:

i'm using mojave. macbook air, mid 2013.

my osu crashes when opened with this error message after the latest update.
the error message reads; osu! was unable to obtain a graphics context. If this is the first time you've seen this, please try restarting your PC. If this is a fresh install, you may be missing graphics drivers.

https://imgur.com/3XIanyh

https://imgur.com/fdo1zdS

when clicking restart osu!, it will proceed to update the client, then say the client is up to date, process repeats with crash and same error message.
obviously i've tried restarting multiple times lol

i've tried the solutions in the osu thread with no result (replacing the osu!.exe file with osu!install.exe renamed to osu!.exe, etc.). in hopes that maybe those solutions would work for me.

i don't use wine with osu, but when osu worked (before the latest update), it ran perfectly fine with no flaws, crashes, frame drop, etc. should i install wine? or reinstall osu?

Same advice I would suggest trying:

Technocoder wrote:

I know you're not using macOS Catalina but try using my experimental Catalina build: community/forums/posts/7367239. It uses an updated Wine engine which is likely to work better. Note that you do not need to follow the steps for disabling System Integrity Protection. Make sure to run my troubleshooter on it as well to remove the quarantine attribute.


Otherwise, if it really is a problem with the latest update you can try downloading the Wineskin again and included inside it will be an older osu!.exe that you can copy over and see if it works.



everything seems to be working pretty fine now, thank you, i appreciate the help :)
only issue is that although osu runs fine, every time i open up osu there is the 'osu crashed' error message.
after clicking restart, osu launches as normal. so no real problem there, just bothersome.

https://imgur.com/5ieLiUt

i cannot import any beatmaps to osu, an error will show. i've tried to remove any strange characters and restart osu.
error reads; there is no windows program configured to open this type of file

https://imgur.com/fDxLF10
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"kiadeiaz"

kiadeiaz wrote:

everything seems to be working pretty fine now, thank you, i appreciate the help :)
only issue is that although osu runs fine, every time i open up osu there is the 'osu crashed' error message.
after clicking restart, osu launches as normal. so no real problem there, just bothersome.

https://imgur.com/5ieLiUt

i cannot import any beatmaps to osu, an error will show. i've tried to remove any strange characters and restart osu.
error reads; there is no windows program configured to open this type of file

https://imgur.com/fDxLF10[/quote:1337]

Okay, the Wine engine that I suggested using might have been too new. Sorry about that. If you still have time, try using either slc's: community/forums/posts/6919344 or peppy's community/forums/posts/7140911 Wineskin build that should use a far more stable engine and should fix the crash you're having. Keep in mind you must run my troubleshooter on these Wineskins to remove the quarantine attribute as well.

How are you importing maps into osu!? If you drag them into the Songs folder and press F5 you shouldn't have any problem importing them.
kiadeiaz
5 posts
Joined October 2015
kiadeiaz
oh alright, works perfectly fine now. i think i'll stay with the version of osu i have currently (even with the bothersome error message at the start, just too lazy to install the other ones)

dragging into the songs folder works, no errors :)
i used to drag the beatmap into the app or manually open it (open with > osu! application).

thank you so much for your help :D
Kakise
1 post
Joined April 2017
Kakise

Technocoder wrote:

This is an experimental build for osu! on macOS Catalina.
Download link: https://mega.nz/#!1wUhSK5b!UOh3p73XnupbZktFgsljieoIdf_L1PkxDFwjBvflNGM
After extraction follow the steps under osu! or Wineskin will not open! from my guide. Ignore any "Operation not permitted" errors.

For the moment, System Integrity Protection must also be disabled. You can check if it is enabled:
Steps

  1. Open Terminal
  2. Type csrutil status and press enter
  3. Check if it says it is enabled

If it is enabled, you can follow these steps from official Apple documentation to disable it: https://developer.apple.com/library/archive/documentation/Security/Conceptual/System_Integrity_Protection_Guide/ConfiguringSystemIntegrityProtection/ConfiguringSystemIntegrityProtection.html#//apple_ref/doc/uid/TP40016462-CH5-SW1

One person has confirmed that the Wineskin does work on Catalina with no apparent issues as long System Integrity Protection is disabled.

Technical Build Information:
This build augments Peppy's (@peppy) July 2019 build with the newer Crossover 19.0.1 build designed to run on macOS Catalina from the Unofficial Wineskin releases: https://github.com/Gcenx/WineskinServer/releases/tag/V1.8.4
The (extracted) application size has increased to 2.56 gigabytes which suggests that it may be more space efficient to rebuild the Wineskin from scratch.

I just successfully opened osu! on Catalina on my Mac. Can I enable System Integrity Protection now that it's properly opening?
Thanks
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

Kakise wrote:

I just successfully opened osu! on Catalina on my Mac. Can I enable System Integrity Protection now that it's properly opening?
Thanks

No, you must keep System Integrity Protection disabled.
PinkBunny19
2 posts
Joined November 2018
PinkBunny19
I tried all the steps but anything work ; - ; it´s so frustrating. I disabled System Integrity Protection but still not working with the same message "osu! is damaged and can't be opened. You should move it to the Trash."

What can I do? ; - ; help
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"PinkBunny19"

PinkBunny19 wrote:

I tried all the steps but anything work ; - ; it´s so frustrating. I disabled System Integrity Protection but still not working with the same message "osu! is damaged and can't be opened. You should move it to the Trash."

What can I do? ; - ; help

Run my troubleshooter on the application: community/forums/topics/1036678. You're missing the steps osu! or Wineskin will not open! from my guide.
Last edited by Technocoder , edited 1 time in total.
SnipAssassin907
2 posts
Joined March 2017
SnipAssassin907

Technocoder wrote:

This is an experimental build for osu! on macOS Catalina.
Download link: https://mega.nz/#!1wUhSK5b!UOh3p73XnupbZktFgsljieoIdf_L1PkxDFwjBvflNGM
After extraction follow the steps under osu! or Wineskin will not open! from my guide. Ignore any "Operation not permitted" errors.

For the moment, System Integrity Protection must also be disabled. You can check if it is enabled:
Steps

  1. Open Terminal
  2. Type csrutil status and press enter
  3. Check if it says it is enabled

If it is enabled, you can follow these steps from official Apple documentation to disable it: https://developer.apple.com/library/archive/documentation/Security/Conceptual/System_Integrity_Protection_Guide/ConfiguringSystemIntegrityProtection/ConfiguringSystemIntegrityProtection.html#//apple_ref/doc/uid/TP40016462-CH5-SW1

One person has confirmed that the Wineskin does work on Catalina with no apparent issues as long System Integrity Protection is disabled.

Technical Build Information:
This build augments Peppy's (@peppy) July 2019 build with the newer Crossover 19.0.1 build designed to run on macOS Catalina from the Unofficial Wineskin releases: https://github.com/Gcenx/WineskinServer/releases/tag/V1.8.4
The (extracted) application size has increased to 2.56 gigabytes which suggests that it may be more space efficient to rebuild the Wineskin from scratch.



Technocoder wrote:

This is an experimental build for osu! on macOS Catalina.
Download link: https://mega.nz/#!1wUhSK5b!UOh3p73XnupbZktFgsljieoIdf_L1PkxDFwjBvflNGM
After extraction follow the steps under osu! or Wineskin will not open! from my guide. Ignore any "Operation not permitted" errors.

For the moment, System Integrity Protection must also be disabled. You can check if it is enabled:
Steps

  1. Open Terminal
  2. Type csrutil status and press enter
  3. Check if it says it is enabled

If it is enabled, you can follow these steps from official Apple documentation to disable it: https://developer.apple.com/library/archive/documentation/Security/Conceptual/System_Integrity_Protection_Guide/ConfiguringSystemIntegrityProtection/ConfiguringSystemIntegrityProtection.html#//apple_ref/doc/uid/TP40016462-CH5-SW1

One person has confirmed that the Wineskin does work on Catalina with no apparent issues as long System Integrity Protection is disabled.

Technical Build Information:
This build augments Peppy's (@peppy) July 2019 build with the newer Crossover 19.0.1 build designed to run on macOS Catalina from the Unofficial Wineskin releases: https://github.com/Gcenx/WineskinServer/releases/tag/V1.8.4
The (extracted) application size has increased to 2.56 gigabytes which suggests that it may be more space efficient to rebuild the Wineskin from scratch.

i cant input my downloaded beatmap and skin. It say "There is no windows program configured to open tihs type of file". But i can open the osu app somehow without using your step
Last edited by SnipAssassin907 , edited 2 times in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"SnipAssassin907"

SnipAssassin907 wrote:

i cant input my downloaded beatmap and skin. It say "There is no windows program configured to open tihs type of file". But i can open the osu app somehow without using your step

Drag your beatmaps and skins into the Songs and Skins folder. You can find these folders by right clicking osu! > Show Package Contents > drive_c > osu!. You need to extract skins as well. Do this by changing the extension of the skin to .zip and then extracting it as normal inside of the Skins folder.

(also you've quoted me twice in your reply. I know what you're talking about so you don't need to quote me)
kyakugon
16 posts
Joined March 2019
kyakugon
hello! i tried following your guide and am having a few troubles-- it says my osu file is damaged? and won't open the program. wondering if you could give any help. thank you so much. i tried troubleshooting with the osu!macOS Agent. i also tried repair but it didn't seem to work either. an image is attached here: https://imgur.com/jqf3qwx
Last edited by kyakugon , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"kyakugon"

kyakugon wrote:

hello! i tried following your guide and am having a few troubles-- it says my osu file is damaged? and won't open the program. wondering if you could give any help. thank you so much. i tried troubleshooting with the osu!macOS Agent. i also tried repair but it didn't seem to work either. an image is attached here: https://imgur.com/jqf3qwx[/quote:1337]

Please paste the full report. Try following the steps: osu! or Wineskin will not open! from my guide manually. Otherwise, right click osu! > Show Package Contents > Contents > MacOS and double click on WineskinLauncher and see if that works.
kyakugon
16 posts
Joined March 2019
kyakugon
here is the full report:


Report

Version 10.15.4 (Build 19E287)
Engine: WS11WineCX64Bit19.0.1
Wineskin 2.9.0.2
Release: Stable40
Quarantine attribute is absent
Detect Direct3D is disabled
Game user configuration is absent
Razer Synapse is absent
System Integrity Protection is disabled
Engine version is supported
No errors in: update.log
Logging file: runtime.log is absent


i've troubleshooted already. is that what you mean by "osu! won't open"? also, could you link me ? i couldn't find that post it seems, (sorry about the inconvenience there!!).
thank you so so much for your help, i very much appreciate this.
Last edited by kyakugon , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"kyakugon"

kyakugon wrote:

here is the full report:
i've troubleshooted already. is that what you mean by "osu! won't open"? also, could you link me ? i couldn't find that post it seems, (sorry about the inconvenience there!!).
thank you so so much for your help, i very much appreciate this.

Here's the link to my guide: community/forums/topics/679205. It's also in my forum signature.
Please try following the latter half of my reply as well:

Technocoder wrote:

Otherwise, right click osu! > Show Package Contents > Contents > MacOS and double click on WineskinLauncher and see if that works.
Last edited by Technocoder , edited 1 time in total.
kyakugon
16 posts
Joined March 2019
kyakugon
hello! i am trying to be prompt on replying because i much appreciate your help.

attached is are screenshots of me following your instructions to your second half of your first reply:) (is it possible i need to update wineskin launcher?

https://imgur.com/a/upfnWY6

part one^

https://imgur.com/a/EdGIeGO

part two^


moreover, when i try following your post guide it says that there is no "osu.app"? i will attach the screenshot here of me following your instructions:


https://imgur.com/a/aXyYN05

^ part 3; this was after i had typed in my password and followed the previous steps.


i have also tried dragging the osu! from my mac to the computer to do the command but no luck either


https://imgur.com/a/jcolt3v


^part 4
Last edited by kyakugon , edited 3 times in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Try renaming the osu! 2.app application on your Desktop to osu!.app and then run the command again. When you dragged the file into the Terminal there was a leading space which might have caused it to fail.

One additional to thing to try is running this command while you are cded into the Desktop in Terminal:
chmod -R +x 'osu!.app'

(You probably don't need to update the WineskinLauncher itself. It's not usually the component that needs to be updated; That "Waiting to Update" message is from your iCloud Drive waiting to upload the file.)
Last edited by Technocoder , edited 4 times in total.
kyakugon
16 posts
Joined March 2019
kyakugon
IT WORKED!! bro you absolutely rule!! thank you so so so much!! i think the chmod -R +x 'osu!.app' helped. thank you so much!! you're awesome:') so happy to finally be able to play again


https://imgur.com/a/iVKMXu0

^ :)))))
Last edited by kyakugon , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
No problem! Let me know if you have any more issues. I think I'll add that command to my troubleshooter when I get the chance so other people won't have the same problem.
kyakugon
16 posts
Joined March 2019
kyakugon
for sure! the only problem i had was it saying before i open it that osu had crashed, but simply restarting the app seems to solve the problem (since it wasn't open in the first place).


i haven't played osu! yet, (so i don't know if this will affect the game [which i kind of doubt it will]) but once i get on the app by just pressing restart osu!, it seems to work perfectly.


https://imgur.com/a/eyb14kg


^image attached here:)
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Yeah, that crash seems to be an issue with the current Wine engine and there doesn't seem to be a fix for it at the moment. Restarting osu! each time should work though.
LadenCentaur924
4 posts
Joined August 2017
LadenCentaur924
hey i tried doing this and it wouldnt open maybe i need to wait longer but it just wouldnt work. i am on high sierra 10.13.6 if you need anymore informationg please tell me
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

LadenCentaur924 wrote:

hey i tried doing this and it wouldnt open maybe i need to wait longer but it just wouldnt work. i am on high sierra 10.13.6 if you need anymore informationg please tell me

Run my troubleshooter: community/forums/topics/1036678 and paste the full report here if it doesn't work.
LadenCentaur924
4 posts
Joined August 2017
LadenCentaur924

Technocoder wrote:

LadenCentaur924 wrote:

hey i tried doing this and it wouldnt open maybe i need to wait longer but it just wouldnt work. i am on high sierra 10.13.6 if you need anymore informationg please tell me

Run my troubleshooter: community/forums/topics/1036678 and paste the full report here if it doesn't work.


yea that didnt work here is the report i did also use the repair function
Report

Version 10.13.6 (Build 17G65)
Engine: WS9Wine2.22
Wineskin 2.6.2
Release: Stable40
Quarantine attribute is absent
Detect Direct3D is disabled
Game user configuration is absent
Razer Synapse is absent
System Integrity Protection is enabled
Engine version is supported
Logging file: update.log is absent
Logging file: runtime.log is absent
Last edited by LadenCentaur924 , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Use one of the newer Wineskins such as slc's community/forums/posts/6919344 or peppy's community/forums/posts/7140911. You must run the troubleshooter first on the Wineskin before opening otherwise it won't work.
LadenCentaur924
4 posts
Joined August 2017
LadenCentaur924

Technocoder wrote:

Use one of the newer Wineskins such as slc's community/forums/posts/6919344 or peppy's community/forums/posts/7140911. You must run the troubleshooter first on the Wineskin before opening otherwise it won't work.

i got it to work tysm actually i dont think it did. It keeps on closing and reopening the updater this is the new report

Report

Version 10.13.6 (Build 17G65)
Engine: WS9Wine4.0-rc3
Wineskin 2.8.8Beta6
Release: Stable40
Quarantine attribute is absent
Detect Direct3D is disabled
Compatibility mode is disabled
Razer Synapse is absent
System Integrity Protection is enabled
Engine version is supported
[Warning] Errors in: update.log
2020-04-16T19:47:45: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:47:54: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:48:02: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:48:11: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:48:19: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:48:28: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:48:37: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:48:45: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:48:54: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:49:02: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:49:11: _pending\osu!.exe => osu!.exe: FAIL
2020-04-16T19:49:27: _pending\osu!.exe => osu!.exe: FAIL
Logging file: runtime.log is absent
Last edited by LadenCentaur924 , edited 2 times in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Follow the steps under the section: Updating the osu! executable in my guide: community/forums/topics/679205
LadenCentaur924
4 posts
Joined August 2017
LadenCentaur924

Technocoder wrote:

Follow the steps under the section: Updating the osu! executable in my guide: community/forums/topics/679205

it says "open the osu! folder" for step 4 what do you mean by that because when i rename the ous!install.exe to use osu! it doesnt replace anything edit:wait i figured it out testing if it works right now edit 2: it works now tysm the only problem i have is it wont let me switch windows so i cant easily get beatmaps while having the game in the background edit3: i also cant get skins to work im trying to fix that atm
Last edited by LadenCentaur924 , edited 3 times in total.
casool
8 posts
Joined November 2014
casool
Hi whenever I open the app it instantly freezes on the main menu opener. I can still hear the music but I'm forced to manually reboot my MacBook because I can't close or click anything.

I'm running Mojave 10.14.6

Report

Version 10.14.6 (Build 18G84)
Engine: WS9Wine2.22
Wineskin 2.6.2
Release: Stable40
Quarantine attribute is absent
Execute flag is present
Detect Direct3D is disabled
Game user configuration is absent
Razer Synapse is absent
System Integrity Protection is disabled
Engine version is supported
Logging file: update.log is absent
No errors in: runtime.log
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Try using either slc's: community/forums/posts/6919344 or peppy's community/forums/posts/7140911 Wineskin build and running my troubleshooter on them. They use a newer engine.
casool
8 posts
Joined November 2014
casool

Technocoder wrote:

Try using either slc's: community/forums/posts/6919344 or peppy's community/forums/posts/7140911 Wineskin build and running my troubleshooter on them. They use a newer engine.


Thanks! Fixed.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Enable "automatically move beatmaps from the Downloads folder" and then download beatmaps from the osu! website. Alternatively, open the osu! folder and drag the beatmaps into the Songs folder. Then press F5 while you are in game.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Are the default maps in the Songs folder? Can you paste what the Songs folder looks like? (like the directory structure).

The "automatically move beatmaps from the Downloads folder" option is part of my troubleshooter. If you open it up it'll be under the General tab. I find it makes it easier to download maps without having to drag it in manually :P.

There seems to be some issues with dragging beatmaps directly into the Songs folder recently (community/forums/topics/1058335). I'm not sure if its related or not. Instead of dragging them onto the osu! logo you can try dragging them into the osu! window itself (this is a little harder and might take some effort to get it working).
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Open osu! > Options > Scroll to graphics > and Uncheck "Fullscreen mode". After you do this osu! won't minimise when you select another window.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
You cannot. At least, not until the wine engine is code-signed and/or notarized (it hasn't been yet).
jinhan54
1 post
Joined March 2015
jinhan54
Hello.. I just got this message from the wineskin and osu app.. how can I resolve this?

file:///Users/jinhanchoi/Desktop/Screenshot%202020-04-27%20at%2015.36.24.png
Last edited by jinhan54 , edited 2 times in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Upload the image to an image hosting website such as https://imgur.com.
Edit: And run my troubleshooter: community/forums/topics/1036678 if you haven't already and paste the report here.
Last edited by Technocoder , edited 1 time in total.
_fluffyy
61 posts
Joined July 2018
_fluffyy
I've been having cursor lag on my osu! client. The automatic problem fixer doesn't help, and nothing on the troubleshooting page worked either. Help?
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

_fluffyy wrote:

I've been having cursor lag on my osu! client. The automatic problem fixer doesn't help, and nothing on the troubleshooting page worked either. Help?

Yeah, my troubleshooter can't help with anything performance related. This is probably a consequence of the Catalina wine engine at the moment. I don't know any way to fix it.

WanderingKitten wrote:

in the editor, there is no file, edit, view etc. I tried turning off full screen and they still weren't there

edit: the "edit" tab was there

This is a known issue. There should be a black bar at the top of the editor window. If you press near the top left of the black bar you can access all the menus (although the menu bar itself probably won't show up). Alternatively, you can reenable XQuartz but I would not recommend that because that will impact performance significantly.
thaiboy digital
23 posts
Joined November 2017
thaiboy digital
is there any way to play the catalina build without it updating every time i open it?
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

brad lee wrote:

is there any way to play the catalina build without it updating every time i open it?

I spent some time experimenting with osu! and Wine and I've finally found a solution (or rather, a workaround). Here are the steps that need to be followed:
  1. Open the osu! folder (Right click osu! > Show Package Contents > drive_c > osu!)
  2. Create a new file in this location named execute.bat (with .bat as the extension)
  3. Type in: start C:\osu!\osu!.exe -nosplash
  4. Save execute.bat
  5. Open Wineskin (Right click osu! > Show Package Contents > Wineskin)
  6. Click Advanced
  7. Change the Windows EXE field to: "C:\osu!\execute.bat" (including the outer quotes)
  8. Close Wineskin

Now osu! will not crash on start up. This obviously isn't the most ideal work around but given the difficulty in getting winedbg to work properly along with the obfuscation in osu!'s stack trace it seems it's the best one at the moment.

If other users report success I'll add this as an automated fix to my troubleshooter.
mec11223
5 posts
Joined February 2019
mec11223
Hi!
Im having issues downloading osu on my Mac (Catalina). I've downloaded the Catalina build and disabled SIP and followed all the listed steps but after I right click and hit open on the application from my applications folder there is a little pop up from the wineskin that lasts about 10 seconds then disappears then nothing happens. What's strange is that about a week ago I tried downloading it (I believe I did all the same steps) except I did not disable SIP and it worked fine! I was able to download a bunch of maps and play for a few hours. when I came to play today however I tried opening the app and it never opened (hence me starting again today and trying to download osu once again). The only thing that has changed within the time of me downloading and playing osu last week and today is that I just downloaded a Wacom install software as I just bought a Wacom tablet to play osu. I would feel terrible having just bought a new tablet to play a game that doesn't work on my computer.
Please let me know your thought!
Thanks!!
Mili
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
"mec11223"

mec11223 wrote:

Hi!
Im having issues downloading osu on my Mac (Catalina). I've downloaded the Catalina build and disabled SIP and followed all the listed steps but after I right click and hit open on the application from my applications folder there is a little pop up from the wineskin that lasts about 10 seconds then disappears then nothing happens. What's strange is that about a week ago I tried downloading it (I believe I did all the same steps) except I did not disable SIP and it worked fine! I was able to download a bunch of maps and play for a few hours. when I came to play today however I tried opening the app and it never opened (hence me starting again today and trying to download osu once again). The only thing that has changed within the time of me downloading and playing osu last week and today is that I just downloaded a Wacom install software as I just bought a Wacom tablet to play osu. I would feel terrible having just bought a new tablet to play a game that doesn't work on my computer.
Please let me know your thought!
Thanks!!
Mili

The only reason I can think of for the Wineskin working before without SIP being disabled is that your system was not on Catalina at that time. Either that, or SIP was already disabled when you installed it. Run my troubleshooter (community/forums/topics/1036678) and paste the report here if there are still issues.
mec11223
5 posts
Joined February 2019
mec11223
Report

Version 10.15.4 (Build 19E287)
Engine: WS11WineCX64Bit19.0.1
Wineskin 2.9.0.2
Release: Stable40
Quarantine attribute is absent
Execute flag is present
[Error] Detect Direct3D is enabled
Compatibility mode is disabled
System Integrity Protection is disabled
Engine version is supported
Razer Synapse is absent
No errors in: update.log
No errors in: runtime.log



Here is the report from the osu I downloaded a week ago (it worked even on Catalina and without SIP disabled somehow but now obviously it won't reopen)
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Can you right click osu! > Show Package Contents > Wineskin > Advanced and then click Test Run. When it's done, there should be two text files that appear on the screen. Copy and paste the contents of those text files here.

I really doubt that the Wacom tablet software would have an effect on osu! opening. If you want to see if it's the cause of the issue open Activity Monitor, search "Wacom" and then force quit (click the stop button at the top left) all of the processes with Wacom in the name.

Edit: I just noticed that the update.log generated successfully which should not have happened if osu! couldn't open. Right click osu! > Show Package Contents > drive_c > osu! > Logs and paste the contents of update.log and runtime.log here.
Last edited by Technocoder , edited 1 time in total.
mec11223
5 posts
Joined February 2019
mec11223
here are the contents of update.log

Report

2020-05-06T05:06:17: CallbackStatus updated to Checking
2020-05-06T05:06:17:
2020-05-06T05:06:17: Beginning update thread
2020-05-06T05:06:17: Stream: Stable40
2020-05-06T05:06:17:
2020-05-06T05:06:17: Running cleanup..
2020-05-06T05:06:17: Cleanup successful!
2020-05-06T05:06:17: Requesting update information...
2020-05-06T05:06:43: CallbackStatus updated to Checking
2020-05-06T05:06:43:
2020-05-06T05:06:43: Beginning update thread
2020-05-06T05:06:43: Stream: Stable40
2020-05-06T05:06:43:
2020-05-06T05:06:43: Running cleanup..
2020-05-06T05:06:43: Cleanup successful!
2020-05-06T05:06:43: Requesting update information...
2020-05-06T05:07:26: CallbackStatus updated to Checking
2020-05-06T05:07:26:
2020-05-06T05:07:26: Beginning update thread
2020-05-06T05:07:26: Stream: Stable40
2020-05-06T05:07:26:
2020-05-06T05:07:26: Running cleanup..
2020-05-06T05:07:26: Cleanup successful!
2020-05-06T05:07:26: Requesting update information...
2020-05-06T05:07:53: CallbackStatus updated to Checking
2020-05-06T05:07:53:
2020-05-06T05:07:53: Beginning update thread
2020-05-06T05:07:53: Stream: Stable40
2020-05-06T05:07:53:
2020-05-06T05:07:53: Running cleanup..
2020-05-06T05:07:53: Cleanup successful!
2020-05-06T05:07:53: Requesting update information...
2020-05-06T05:08:33: CallbackStatus updated to Checking
2020-05-06T05:08:33:
2020-05-06T05:08:33: Beginning update thread
2020-05-06T05:08:33: Stream: Stable40
2020-05-06T05:08:33:
2020-05-06T05:08:33: Running cleanup..
2020-05-06T05:08:33: Cleanup successful!
2020-05-06T05:08:33: Requesting update information...
2020-05-06T05:10:12: CallbackStatus updated to Checking
2020-05-06T05:10:12:
2020-05-06T05:10:12: Beginning update thread
2020-05-06T05:10:12: Stream: Stable40
2020-05-06T05:10:12:
2020-05-06T05:10:12: Running cleanup..
2020-05-06T05:10:12: Cleanup successful!
2020-05-06T05:10:12: Requesting update information...
2020-05-06T05:10:56: CallbackStatus updated to Checking
2020-05-06T05:10:56:
2020-05-06T05:10:56: Beginning update thread
2020-05-06T05:10:56: Stream: Stable40
2020-05-06T05:10:56:
2020-05-06T05:10:56: Running cleanup..
2020-05-06T05:10:56: Cleanup successful!
2020-05-06T05:10:56: Requesting update information...
2020-05-06T05:11:18: CallbackStatus updated to Checking
2020-05-06T05:11:18:
2020-05-06T05:11:18: Beginning update thread
2020-05-06T05:11:18: Stream: Stable40
2020-05-06T05:11:18:
2020-05-06T05:11:18: Running cleanup..
2020-05-06T05:11:18: Cleanup successful!
2020-05-06T05:11:18: Requesting update information...
2020-05-06T05:12:10: CallbackStatus updated to Checking
2020-05-06T05:12:10:
2020-05-06T05:12:10: Beginning update thread
2020-05-06T05:12:10: Stream: Stable40
2020-05-06T05:12:10:
2020-05-06T05:12:10: Running cleanup..
2020-05-06T05:12:10: Cleanup successful!
2020-05-06T05:12:10: Requesting update information...
2020-05-06T05:18:09: CallbackStatus updated to Checking
2020-05-06T05:18:09:
2020-05-06T05:18:09: Beginning update thread
2020-05-06T05:18:09: Stream: Stable40
2020-05-06T05:18:09:
2020-05-06T05:18:09: Running cleanup..
2020-05-06T05:18:09: Cleanup successful!
2020-05-06T05:18:09: Requesting update information...
2020-05-06T05:27:02: CallbackStatus updated to Checking
2020-05-06T05:27:02:
2020-05-06T05:27:02: Beginning update thread
2020-05-06T05:27:02: Stream: Stable40
2020-05-06T05:27:02:
2020-05-06T05:27:02: Running cleanup..
2020-05-06T05:27:02: Cleanup successful!
2020-05-06T05:27:02: Requesting update information...
2020-05-06T05:48:16: CallbackStatus updated to Checking
2020-05-06T05:48:16:
2020-05-06T05:48:16: Beginning update thread
2020-05-06T05:48:16: Stream: Stable40
2020-05-06T05:48:16:
2020-05-06T05:48:16: Running cleanup..
2020-05-06T05:48:16: Cleanup successful!
2020-05-06T05:48:16: Requesting update information...
2020-05-06T05:49:38: CallbackStatus updated to Checking
2020-05-06T05:49:38:
2020-05-06T05:49:38: Beginning update thread
2020-05-06T05:49:38: Stream: Stable40
2020-05-06T05:49:38:
2020-05-06T05:49:38: Running cleanup..
2020-05-06T05:49:38: Cleanup successful!
2020-05-06T05:49:38: Requesting update information...


and here are the contents of runtime.log

Report

2020-04-30T04:09:11: GL Initialized
2020-04-30T04:09:11: GL Version: 2.1 ATI-3.8.24
2020-04-30T04:09:11: GL Renderer: AMD Radeon Pro Vega 56 OpenGL Engine
2020-04-30T04:09:11: GL Shader Language version: 1.20
2020-04-30T04:09:11: GL Vendor: ATI Technologies Inc.
2020-04-30T04:09:11: GL Extensions: GL_ARB_color_buffer_float GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_seamless_cube_map GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra GL_ARB_vertex_blend GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_depth_bounds_test GL_EXT_draw_buffers2 GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_array GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array_bgra GL_APPLE_aux_depth_stencil GL_APPLE_client_storage GL_APPLE_element_array GL_APPLE_fence GL_APPLE_float_pixels GL_APPLE_flush_buffer_range GL_APPLE_flush_render GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_APPLE_pixel_buffer GL_APPLE_rgb_422 GL_APPLE_row_bytes GL_APPLE_specular_vector GL_APPLE_texture_range GL_APPLE_transform_hint GL_APPLE_vertex_array_object GL_APPLE_vertex_array_range GL_APPLE_vertex_point_size GL_APPLE_vertex_program_evaluators GL_APPLE_ycbcr_422 GL_ATI_blend_equation_separate GL_ATI_blend_weighted_minmax GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_IBM_rasterpos_clip GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp GL_NV_fog_distance GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_barrier GL_SGI_color_matrix GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod WGL_EXT_extensions_string WGL_EXT_swap_control
2020-04-30T04:09:11: GL Context: Index: 21, Color: 32 (8888), Depth: 32, Stencil: 0, Samples: 2, Accum: 0 (0000), Buffers: 2, Stereo: False
Last edited by mec11223 , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Please paste the logs from the Wineskin Test Run as well (and try force quitting Wacom to see if that helps). It'd be best to put the logs in a spoiler tag so they don't take up so much space. The updater seems to be working fine so I'm not sure why osu! itself isn't opening.
mec11223
5 posts
Joined February 2019
mec11223
here is the log from the wineskin test run

Report

2020-04-30T04:09:11: GL Initialized
2020-04-30T04:09:11: GL Version: 2.1 ATI-3.8.24
2020-04-30T04:09:11: GL Renderer: AMD Radeon Pro Vega 56 OpenGL Engine
2020-04-30T04:09:11: GL Shader Language version: 1.20
2020-04-30T04:09:11: GL Vendor: ATI Technologies Inc.
2020-04-30T04:09:11: GL Extensions: GL_ARB_color_buffer_float GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_seamless_cube_map GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra GL_ARB_vertex_blend GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_depth_bounds_test GL_EXT_draw_buffers2 GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_array GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array_bgra GL_APPLE_aux_depth_stencil GL_APPLE_client_storage GL_APPLE_element_array GL_APPLE_fence GL_APPLE_float_pixels GL_APPLE_flush_buffer_range GL_APPLE_flush_render GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_APPLE_pixel_buffer GL_APPLE_rgb_422 GL_APPLE_row_bytes GL_APPLE_specular_vector GL_APPLE_texture_range GL_APPLE_transform_hint GL_APPLE_vertex_array_object GL_APPLE_vertex_array_range GL_APPLE_vertex_point_size GL_APPLE_vertex_program_evaluators GL_APPLE_ycbcr_422 GL_ATI_blend_equation_separate GL_ATI_blend_weighted_minmax GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_IBM_rasterpos_clip GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp GL_NV_fog_distance GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_barrier GL_SGI_color_matrix GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod WGL_EXT_extensions_string WGL_EXT_swap_control
2020-04-30T04:09:11: GL Context: Index: 21, Color: 32 (8888), Depth: 32, Stencil: 0, Samples: 2, Accum: 0 (0000), Buffers: 2, Stereo: False


and here is last run X11.log

Report

Engine Used: WS11WineCX64Bit19.0.1
Hardware:

Hardware Overview:

Model Name: iMac Pro
Model Identifier: iMacPro1,1
Processor Name: 10-Core Intel Xeon W
Processor Speed: 3 GHz
Number of Processors: 1
Total Number of Cores: 10
L2 Cache (per Core): 1 MB
L3 Cache: 13.8 MB
Hyper-Threading Technology: Enabled
Memory: 64 GB
Boot ROM Version: 1037.100.362.0.0 (iBridge: 17.16.14281.0.0,0)

Graphics/Displays:

Radeon Pro Vega 56:

Chipset Model: Radeon Pro Vega 56
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 8 GB
Vendor: AMD (0x1002)
Device ID: 0x6867
Revision ID: 0x0000
ROM Revision: 113-D0500D-114
VBIOS Version: 113-D05001A1XL-018
Option ROM Version: 113-D05001A1XL-018
EFI Driver Version: 01.01.114
Metal: Supported, feature set macOS GPUFamily2 v1
Displays:
iMac:
Display Type: Built-In Retina LCD
Resolution: 5120 x 2880 Retina
Framebuffer Depth: 30-Bit Color (ARGB2101010)
Main Display: Yes
Mirror: Off
Online: Yes
Automatically Adjust Brightness: No
Connection Type: Internal


Ive also quit Wacom. hopefully you can see a solvable issue? also to note: once I accidentally double clicked the application to open instead of right clicking to open and I heard that could cause issues? not sure.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Everything seems to look fine. Right clicking osu! and then pressing open should work even if you've double clicked it. It'd be best if you can record a video of what's happening when you open osu!.

When you say that something appeared from the Wineskin for about 10 seconds, are you sure that's not the osu! updater? Just in case, open up my troubleshooter and then click on Other and then click on Update osu! and see if that helps.

If that doesn't work try downloading the Catalina Wineskin again (and make sure not to transfer any files over) and then run my troubleshooter on it and then see if that works.
mec11223
5 posts
Joined February 2019
mec11223
Yes I believe it is the wineskin updater that pops up. I tried the update button in your trouble shooter but nothing happened. I tried downloading again and the same thing happens (what exactly do you mean by "transfer any files over"?).
another thing to note is that I have been using Keka to extract the zip files cause when I use the default Mac archive utility it just says the download is damages and needs to be moved to the trash.
I could definitely upload a video of what's happening but im not sure how (sorry im new to using this forum!) if you could tell me how that would be great!

btw this is the troubleshoot scan on the newly downloaded osu!

Report

Version 10.15.4 (Build 19E287)
Engine: WS11WineCX64Bit19.0.1
Wineskin 2.9.0.2
Release: Stable40
Quarantine attribute is absent
Execute flag is present
[Error] Detect Direct3D is enabled
Game user configuration is absent
System Integrity Protection is disabled
Engine version is supported
Razer Synapse is absent
No errors in: update.log
Log file: runtime.log is absent
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
The archive tool I prefer to use is The Unarchiver which can be found in the macOS App Store but the one used shouldn't matter. You can take a video using QuickTime Player by pressing File and then New Screen Recording. If you already have the file, it's probably best to upload it to YouTube (I'm not aware of any way to upload to the forums directly).

One thing to check is that when you open osu! open Activity Monitor and search for wine and see if there are any processes containing Wine in the name. Let me know if it appears briefly and then goes away or if it stays there. If there are processes with those names try force quitting all of them and then opening osu! again.
Kikatek
1 post
Joined January 2017
Kikatek
How to fix sluterring ?

my ping is often unstable.
Last edited by Kikatek , edited 2 times in total.
bruh42069
2 posts
Joined January 2020
bruh42069
Hi Technocoder, i've been trying to download osu on my mac but i've been running into trouble. i had just updated to mac catalina and osu stopped running. i did all the steps you said to do (including disabling SIP) but i'm currently stuck at the terminal where if i type in the command

sudo xattr -dr com.apple.quarantine 'osu!.app'

it comes up with

xattr: No such file: osu!.app

how do i fix this? and can you please go into detail. ALSO it would be greatly appreciated if you could contact me at my instagram acc @eye_blech but if you cant its fine. thanks so much and like all the stuff you do is SUPER cool.
Last edited by bruh42069 , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder
Run my troubleshooter: community/forums/topics/1036678 (sorry, I don't have instagram)
Last edited by Technocoder , edited 1 time in total.
bruh42069
2 posts
Joined January 2020
bruh42069
You're actually amazing, thanks so MUCH. osu is running fine. you should make a yt vid on this like it'd be mad. anyways thanks so much you saved my life
WuDini
6 posts
Joined February 2020
WuDini
Would you recommend downloading osu! lazer or is there a specific version of osu! for the catalina update?
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

WuDini wrote:

Would you recommend downloading osu! lazer or is there a specific version of osu! for the catalina update?
Catalina Wineskin: community/forums/posts/7367239
WuDini
6 posts
Joined February 2020
WuDini

Technocoder wrote:

WuDini wrote:

Would you recommend downloading osu! lazer or is there a specific version of osu! for the catalina update?
Catalina Wineskin: community/forums/posts/7367239
Thanks for the help but I'm still having issues, before osu! can open it says that “osu! is damaged and can’t be opened. You should move it to the Trash." I don't know why this is happening, any suggestions?
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

WuDini wrote:

Technocoder wrote:

WuDini wrote:

Would you recommend downloading osu! lazer or is there a specific version of osu! for the catalina update?
Catalina Wineskin: community/forums/posts/7367239
Thanks for the help but I'm still having issues, before osu! can open it says that “osu! is damaged and can’t be opened. You should move it to the Trash." I don't know why this is happening, any suggestions?
Run my troubleshooter: community/forums/topics/1036678. It means you've done the xattr step incorrectly.
WuDini
6 posts
Joined February 2020
WuDini
I'm having issues downloading skins and beatmaps on the catalina v of osu! any suggestions?
Last edited by WuDini , edited 1 time in total.
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

WuDini wrote:

I'm having issues downloading skins and beatmaps on the catalina v of osu! any suggestions?
Please clarify what you mean by "having issues". There are two ways to go about installing skins and beatmaps.
1. Use osu!macOS Agent
If you enable the "Automatically move" options for the skins and beatmaps, when you download a skin or beatmap they will be automatically moved into the Skins or Songs folder. Then, to load new beatmaps just press F5 while you're in game.
2. Manually
Find the osu! folder by right clicking osu! > Show Package Contents > drive_c > osu! then drag any beatmaps into the Songs folder and press F5. To load skins, you need to first extract the skin and then move the folder into the Skins folder.
Dyno
2 posts
Joined April 2020
Dyno
i cannot open osu is say "OSU! is damaged and could not be opened"
Technocoder
419 posts
Joined June 2017
Topic Starter
Technocoder

Dyno503 wrote:

i cannot open osu is say "OSU! is damaged and could not be opened"
Run my troubleshooter: community/forums/topics/1036678
WuDini
6 posts
Joined February 2020
WuDini

Technocoder wrote:

WuDini wrote:

I'm having issues downloading skins and beatmaps on the catalina v of osu! any suggestions?
Please clarify what you mean by "having issues". There are two ways to go about installing skins and beatmaps.
1. Use osu!macOS Agent
If you enable the "Automatically move" options for the skins and beatmaps, when you download a skin or beatmap they will be automatically moved into the Skins or Songs folder. Then, to load new beatmaps just press F5 while you're in game.
2. Manually
Find the osu! folder by right clicking osu! > Show Package Contents > drive_c > osu! then drag any beatmaps into the Songs folder and press F5. To load skins, you need to first extract the skin and then move the folder into the Skins folder.
It says "There is no Window program configured to open this type of file"
Dyno
2 posts
Joined April 2020
Dyno

Technocoder wrote:

Dyno503 wrote:

i cannot open osu is say "OSU! is damaged and could not be opened"
Run my troubleshooter: community/forums/topics/1036678
oh wait never mind it started working
Y u n o m i
2 posts
Joined July 2018
Y u n o m i
Hello , i've been trying to make osu work by reading the whole thread but im still getting crashes ...I followed all the steps from your guide, disabled SIP and used that sudo command.
I ran the troubleshooter and it doesnt detect any error ?
I redownloaded the wswine.bundle thingy as well and nothing changed.

Log of the troubleshooter
Report
Version 10.15.4 (Build 19E287)
Engine: WS11WineCX64Bit19.0.1
Wineskin 2.9.0.2
Release: Stable40
Quarantine attribute is absent
Execute flag is present
Detect Direct3D is disabled
Compatibility mode is disabled
System Integrity Protection is disabled
Engine version is supported
Razer Synapse is absent
No errors in: update.log
No errors in: runtime.log

The error im getting when it crashes
System.ArgumentException: Font 'Aller Light' does not support style 'Regular'.
at System.Drawing.Font.CreateNativeFont()
at System.Drawing.Font.Initialize(FontFamily family, Single emSize, FontStyle style, GraphicsUnit unit, Byte gdiCharSet, Boolean gdiVerticalFont)
at System.Drawing.Font.Initialize(String familyName, Single emSize, FontStyle style, GraphicsUnit unit, Byte gdiCharSet, Boolean gdiVerticalFont)
at System.Drawing.Font..ctor(String familyName, Single emSize)
at #=zVzAPdUfmOnjId_MWow==..ctor(#=zTcvbm9y24ME7X4KrNpU_q74= #=zDnxdihhbOdyg)
at #=zTcvbm9y24ME7X4KrNpU_q74=..ctor(String #=zkwaAWY0=, Single #=zgHf1W4I=, Vector2 #=zYZ3qzYU=, Single #=zxYVkfU4=, Single #=zrJBDHbc=, Boolean #=zCAmEw34Z5D6h)
at #=z6FaWn1NtJB0wJkYscQ==.#=z8BagHf3ux4r1()
at #=z6FaWn1NtJB0wJkYscQ==.#=z5JizcH4=()
at #=zfFcjAJ0YPyGkZvN4hg==.#=z5JizcH4=()
at #=z5_vRtmUAMLvKaP9hlQ==.#=zzJOyW68=()
at #=zjc39W8jqUQrb2$ataA==.#=z0X3iPW$$zuSy(String #=z51FGDXxDLp4g, Boolean #=zgJyTubCIRZ$hbr4rWCMYtnk=, Boolean #=z1$1X$kJ0FINcnWaVsg==)

Thank you for your hard work :)
show more
Please sign in to reply.

New reply

0
373 / 449
/