show more
danny9011osu
12 posts
Joined July 2014
danny9011osu
Hi, it's great if we can connect the tatacon without using wiimote / bluetooth, and there is problem to my bluetooth too. I can't even play it properly.
How is the development now?
I can't wait to see the finished product.
Wish you can make it soon and teach us. :3
P.S. I didn't reply but I've been checking this post everyday!!
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Yeah, Christmas rush delayed me a bit :S



I've just realised I forgot to order the actual USB connector, so there's going to be a 5 business day wait until that appears...

I might end up just taking apart a USB cable and connecting that instead, but I'll keep this updated all the same :)
tobuei
24 posts
Joined June 2013
tobuei
Nice!
This showed up in the mail today so i am keen to see how good it is
SPOILER
It is also way bigger than i expected, the monitor in the background is a 27" for some perspective
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
As a fellow 27" monitor user... Holy crap that drum is big! Better speed up my development efforts, keen to see how that performs.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
People with circuit making experience might understand the monumental failure I made with this board:
SPOILER


...That aside, with some awful fixes I now have a working prototype. Firmware is next, then software to configure what buttons the drum activates. Hopefully it'll be finished by the time the next (fingers crossed, the final) prototype arrives from the fab :)

montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Sorry for the lack of updates, I recently started a full time internship and have been pretty low on time to do stuff like this.

I've got the prototype working now, but there's still a 15-20ms input lag. Currently determining whether this is an issue with my controller or whether the tatacon actually has inherent lag (I hope not!).
tobuei
24 posts
Joined June 2013
tobuei
No worries man take your time all looks pretty sweet so far, even if it might have a bit of lag it should still have better latency than Bluetooth and not having to pair the controller each time i want to play is a big bonus too.
abrian
154 posts
Joined October 2011
abrian
What is the difference between this and the converter outside? But surely the circuit board art is fantastic ww
Corin
910 posts
Joined January 2011
Corin
Damn your soldering is really neat :D
Nice job!
BBB
141 posts
Joined January 2014
BBB
Hey there yo, just a little bump to let you know there's still interest in this project ;)
Espionage724
944 posts
Joined August 2011
Espionage724
I'd be interested in this as well; just have to go pick-up another Tatacon (regrettably sold the Wii and PS2 ones I had).

A quick idea on the latency; can the converter do 1000Hz polling rate? Not sure what the device itself has to have as a requirement, but you can force polling rates on most USB devices with a custom driver/service in Windows, and possibly a program in Linux.

On a slightly different matter; how would this adapter compare to wusbmote?
danny9011osu
12 posts
Joined July 2014
danny9011osu
How is it now?
tobuei
24 posts
Joined June 2013
tobuei

Espionage724 wrote:

On a slightly different matter; how would this adapter compare to wusbmote?
I tried wusbmote with my Hori tatacon and it doesn't seem to work, the wusbmote is recognized as a game pad which osu! doesn't have support for in taiko mode unfortunately and also when i got to configure the wusbmote controller from the devices panel i get no button inputs from the drum. but i do get button responses from the nunchuck buttons and stick. I haven't played around with the config tool yet though so ill see how that goes

*Edit
The config tool is actually a command line tool for configuring the adaptor and has only been tested in linux but apparently works in windows and OSX as well, i have only done basic arduino stuff before so this stuff is over my head and i couldn't be arsed trying to figure it out at this point and wouldn't really know where to even begin (probably at reading the full product description before i buy things).

to the OP I should also mention i am still interested in the converter just exploring different options in the meantime
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
GRUMBLE GRUMBLE this is the second time the forum has neglected to email me replies >:( I thought others had lost interest, and kinda forgot to check manually :(

I think the 20ms lag is in the controller itself and the way hits are registered - they seem to be capacitive switches, which are never really instant. I'm not happy with 20ms lag, so I'm somewhat stalled at the moment. I would love to be proved wrong.

As such, I've put my progress thus far on GitHub, (hopefully) ready for others to take a crack at. If you have an Arduino, you can buy a $2 nunchuck adapter from eBay (search "Arduino nunchuck") and play around - the important stuff is reading the status of the switches via i2c.

Sorry for disappearing for 2 months, I gave up and forgot people still wanted updates :(

If you want to take this further and are having issues, please PM me, I will be happy to assist where I can.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Happy new year, taiko players!

Over the past few months, with some excellent help from tobuei and Sand (seriously, thanks guys) I have made a new version.

Features
  1. 1ms response time. Delay is completely imperceptible
  2. Sweet LEDs (can be turned off)
  3. Responds so fast you can bounce your sticks and get multi hits. Can be turned off with Debounce feature.
  4. Tested working on official, Hori and knockoff controllers
  5. Windows, Linux, Mac compatible + cross platform Chrome app for configuration
  6. Config app allows future firmware updates to add more features
  7. No drivers required!
  8. Open source
Updated price estimate is $20USD shipped anywhere.

I have made an order for 20 boards to start with, and they will arrive about a month from now.

I won't get payment from anyone until they arrive, but they're coming!

Last edited by montymintypie , edited 2 times in total.
abrian
154 posts
Joined October 2011
abrian
Thanks for your effort you have put in this project!
Can't wait to see it actually comes out
Bauxe
1,624 posts
Joined August 2012
Bauxe
Woah I thought this died. Will 100% be purchasing one!
R2Zero
2 posts
Joined July 2012
R2Zero
I'd definitely start taiko mode if I had one of these. Im totally interested in buying one!
buraitopengin
2 posts
Joined January 2016
buraitopengin
Hello there, I'll definitively buy it once you release it ;)
OnosakiHito
osu!taiko Paragon
6,847 posts
Joined March 2010
OnosakiHito
Why this isn't in the Taiko subforum? I would have never seen it if I didn't check the Development forum because of boredom. lol
For users like me, this is very interesting. I'm having a tatacon, but I rarely play it due to way too huge input lags. I can expect this to work even my outdate tatacon, right? As in, this works for the old and new versions of TNT's tatacons?
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

OnosakiHito wrote:

Why this isn't in the Taiko subforum? I would have never seen it if I didn't check the Development forum because of boredom.
It made sense for it to be in development initially, but now it's ready I should post there! Should I move the thread or just post a link to it in the taiko forum?

OnosakiHito wrote:

I can expect this to work even my outdate tatacon, right? As in, this works for the old and new versions of TNT's tatacons?
If Taiko no Tatsujin can see it, it should work with my converter! :D
Bauxe
1,624 posts
Joined August 2012
Bauxe
Might be best to have a post linking here in the Taiko forum. The correct section is here however it would be of interest to many taiko players.
Catgirl
472 posts
Joined June 2013
Catgirl
I don't have a Tatacon but seeing that this is a thing, assuming it works as well as you described I'd love to try using one!

When will orders be open? :^)
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

Catgirl wrote:

When will orders be open? :^)
As soon as I receive working boards! China is the only way to make it affordable, but they're not fast ;)
GabCM
16 posts
Joined June 2010
GabCM
I will absolutely buy one as soon as you open some orders! Can't wait!
xtrem3x
1,789 posts
Joined July 2009
xtrem3x

Luna wrote:

Is this really lagless?
If so, take all my money
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Bad news everyone - my supplier is having some unexpected delays sourcing some parts for the boards. Updated estimate is now late February.

If I'm lucky and they manage to send the boards before Chinese New Year, I will get them mid February. Will keep you updated as this progresses.
buraitopengin
2 posts
Joined January 2016
buraitopengin
no problem pal, as long as you keep us informed, it's all good ;)
Muf mi Taemin
5 posts
Joined January 2013
Muf mi Taemin
Great, now I need to buy Tatacon :lol:
Dia_Haze
27 posts
Joined January 2016
Dia_Haze
Thanks so much for all of your effort!!!
hiandbye
54 posts
Joined April 2015
hiandbye
How long will you sell these? Should I buy one now because it will be my only chance? Cause I won't be able to afford a Tatacon for quite a while.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

hiandbye wrote:

How long will you sell these? Should I buy one now because it will be my only chance? Cause I won't be able to afford a Tatacon for quite a while.
I will sell these for as long as possible! If I disappear/get abducted by aliens/die, anyone with enough funds can make batches themselves from the files on GitHub :)

There will be supply delays early on as I work out what the demand is like, but these should be alleviated by the second or third batch :)
Korrui
75 posts
Joined April 2014
Korrui
hey its me again i was just wondering if you got them in again. its been a while since i have talked to you so i just wanted to check up on their status
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

AnimeGod2205 wrote:

hey its me again i was just wondering if you got them in again. its been a while since i have talked to you so i just wanted to check up on their status
Still waiting on them to ship. Chinese New Year slowed things down somewhat, combined with the extended delay in sourcing parts.
Korrui
75 posts
Joined April 2014
Korrui

montymintypie wrote:

AnimeGod2205 wrote:

hey its me again i was just wondering if you got them in again. its been a while since i have talked to you so i just wanted to check up on their status
Still waiting on them to ship. Chinese New Year slowed things down somewhat, combined with the extended delay in sourcing parts.
Dang, they havent even shipped yet? so many delays
furntree
1 post
Joined February 2016
furntree
Ahh this is the converter of my dreams. 100% Confirmed for one once they get in! :D :D
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Great news! They've finally shipped to me! Expect them to be here in 2 weeks :)
Korrui
75 posts
Joined April 2014
Korrui
Yussssssssss finally
Korrui
75 posts
Joined April 2014
Korrui
Cant wait for them
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Still waiting for the parcel, but while I wait, I got hard numbers on latency.

Using my scope, I had 1 probe connected to a piezo mic, and another to the LED of the converter. This LED updates at 1KHz, the same rate as the USB update rate.

SPOILER

I then smacked the drum 50 times, and recorded the delay between the moment the piezo started to respond, and when the converter registered a hit. An example measurement:


After 50 hits, here are the results:
Average: 1.802ms
Median: 1.77ms
Std Deviation: 0.44454517
Min: 1.1ms
Max: 2.78ms

Rounding the max value up, I can confidently say that there is an absolute worst case 3ms lag. And average lag of 1.8ms. This is imperceptible. Lagfree = confirmed!
Last edited by montymintypie , edited 1 time in total.
Korrui
75 posts
Joined April 2014
Korrui
Sounds good.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
I've been prototyping a case.

This is an early prototype so the case doesn't fit properly and looks bad, but would there be interest? It would be 3-5 USD delivered, or cheaper if bundled with the converter. The source is also open so if you own a 3D printer you can make it yourself.

Pictures inside the spoilerbox...
SPOILER

Bauxe
1,624 posts
Joined August 2012
Bauxe
I'd like a case when I buy one yeah, would be nice.
Korrui
75 posts
Joined April 2014
Korrui
I'm happy that I was able to help you and give you the thought of doing cases for them. Given any thought to making them in different colors?
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

AnimeGod2205 wrote:

Given any thought to making them in different colors?
Any colour, so long as it's black...

I'll see if I can do colour choice. No confirmation yet.
Korrui
75 posts
Joined April 2014
Korrui

montymintypie wrote:

AnimeGod2205 wrote:

Given any thought to making them in different colors?
Any colour, so long as it's black...

I'll see if I can do colour choice. No confirmation yet.
Haha ok
Obama Taichou
2 posts
Joined September 2013
Obama Taichou
Can't wait till I can get my hands on this. Got a taiko game for Wii for Christmas two years back and couldn't play it since the game is region locked.
Korrui
75 posts
Joined April 2014
Korrui

Obama Taichou wrote:

Can't wait till I can get my hands on this. Got a taiko game for Wii for Christmas two years back and couldn't play it since the game is region locked.

Lol I hate region locked stuff.
Last edited by Korrui , edited 1 time in total.
Obama Taichou
2 posts
Joined September 2013
Obama Taichou

AnimeGod2205 wrote:

Obama Taichou wrote:

Can't wait till I can get my hands on this. Got a taiko game for Wii for Christmas two years back and couldn't play it since the game is region locked.
Lol i hate region locked stuff
yes sir
afureru
2 posts
Here since the beginning
afureru
Great news!

Will you ship it to Brazil when it's available?
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

afureru wrote:

Will you ship it to Brazil when it's available?
I hear that in Brazil post can take a very long time. I will ship there, but can make the package Registered if you require the additional guarantee.
MakkipMaster
5 posts
Joined December 2015
MakkipMaster
This looks SO amazing! I'd love to use this for Taikojiro, actually. Would it only work with Osu?

//also if possible could I be emailed when they arrive? I don't wanna miss them or anything :3
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
The converter pretends to be a keyboard - as long as the keys are set to the same ones you use in Taikojiro, it will work fine. I will release the configuration app when I start shipping converters.

If you subscribe to this thread you will get an email when someone posts. I will post as soon as they arrive! I expect them here by Friday - fingers crossed :)
FluffyHuggie
6 posts
Joined December 2013
FluffyHuggie
I just recently got a tatacon and when I Bluetooth connected it to my PC, it worked on osu but I had to hit ACTUAL SMASHING strength to get just one hit and I think it's the problem with the wii so I am really looking forward to this. I also admire you on how you have been working on this for a year!!
So when do you think the final product will be ready and ready to ship, I really need this!
Korrui
75 posts
Joined April 2014
Korrui

FluffyHuggie wrote:

I just recently got a tatacon and when I Bluetooth connected it to my PC, it worked on osu but I had to hit ACTUAL SMASHING strength to get just one hit and I think it's the problem with the wii so I am really looking forward to this. I also admire you on how you have been working on this for a year!!
So when do you think the final product will be ready and ready to ship, I really need this!

I know right!? I have heard that putting a towel or cloth over it helps. I don't really understand how, but I tried it and it helps a little so you don't have to use the force that you would use to cut the branch off of a tree with an ax XD.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
They're here!

Building...
SPOILER


Complete!


2 important notes
  • The cases aren't ready yet. If you purchase now you won't get a case.
    I underestimated some costs and the price had to be raised to $25. Shipping is still free!
If you are happy with this, go buy them here! I will ship all purchases within 3 business days of payment. :)

While you're at it, the Chrome web app is now public. You will need it to configure buttons, LEDs, debouncing, and for future firmware updates.
Thievsly
3 posts
Joined January 2016
Thievsly
Ahhhh, yissss! I been creeping on this thread for ages! My order has been made!
MakkipMaster
5 posts
Joined December 2015
MakkipMaster
heck, i've only got 20$ :// next time for sure! ^^
Bauxe
1,624 posts
Joined August 2012
Bauxe
Ordered mine, looking forward to it!
Catgirl
472 posts
Joined June 2013
Catgirl
I'll pass on this first batch actually because I can't use it right now, but I'm looking forward to see footage of people playing and using one, that would be pretty cool!
FluffyHuggie
6 posts
Joined December 2013
FluffyHuggie
Ill be waiting for the cases to come out so when will that be, and also how much stock do you have because I surely wouldn't want it to run out and I won't be able to buy it! :( :(
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

FluffyHuggie wrote:

Ill be waiting for the cases to come out so when will that be, and also how much stock do you have because I surely wouldn't want it to run out and I won't be able to buy it! :( :(
I have 12 left. If I run out, I will simply order more :)

Cases.... fortnight? I don't have a 3D printer so there's a lot of shuffling getting other people to print them for me.
FluffyHuggie
6 posts
Joined December 2013
FluffyHuggie

montymintypie wrote:

FluffyHuggie wrote:

Ill be waiting for the cases to come out so when will that be, and also how much stock do you have because I surely wouldn't want it to run out and I won't be able to buy it! :( :(
I have 12 left. If I run out, I will simply order more :)

Cases.... fortnight? I don't have a 3D printer so there's a lot of shuffling getting other people to print them for me.
Alright then I'll be waiting to order it when you announce the cases thanks!
afureru
2 posts
Here since the beginning
afureru

FluffyHuggie wrote:

montymintypie wrote:

Ill be waiting for the cases to come out so when will that be, and also how much stock do you have because I surely wouldn't want it to run out and I won't be able to buy it! :( :(
I have 12 left. If I run out, I will simply order more :)

Cases.... fortnight? I don't have a 3D printer so there's a lot of shuffling getting other people to print them for me.
I also was insterested on your case, but I'm afraid you run out of converters by the time you get them ready...

Would you make your 3D models available for people printing their own cases? In that case, I think I could ask a friend of mine to print it for me :)
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

afureru wrote:

Would you make your 3D models available for people printing their own cases? In that case, I think I could ask a friend of mine to print it for me :)
Absolutely! The unfinished cases are in .scad format in the Github repo. When they are finished, I'll also release .stl files which any 3D printer supports!
FluffyHuggie
6 posts
Joined December 2013
FluffyHuggie
Oh and if you have time can you show us a example like a video or something that shows the usb converter and a tatacon in use so I could see the lag free results and just how hard or soft you need to hit, but you dont have to I'm just curious :D
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

FluffyHuggie wrote:

Oh and if you have time can you show us a example like a video or something that shows the usb converter and a tatacon in use so I could see the lag free results and just how hard or soft you need to hit, but you dont have to I'm just curious :D
Give me a couple of days to clean my desk and sure ;)
FluffyHuggie
6 posts
Joined December 2013
FluffyHuggie
ALRIGHT heheh :)
XOlifreX
19 posts
Joined April 2014
XOlifreX
OMG! :D
Definitely buying one in the near future!
Great work, montymintypie! :)
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
I'm about to order more boards, but I wanted to ask people's opinions - currently there's a USB A port on the converter. It's like a USB flash drive or a dongle of sorts.

Would people prefer micro USB, like on their phone? Pros: can get a longer cable out of it. Cons: If you don't have a cable already it's 1 extra thing you need.
FluffyHuggie
6 posts
Joined December 2013
FluffyHuggie

montymintypie wrote:

I'm about to order more boards, but I wanted to ask people's opinions - currently there's a USB A port on the converter. It's like a USB flash drive or a dongle of sorts.

Would people prefer micro USB, like on their phone? Pros: can get a longer cable out of it. Cons: If you don't have a cable already it's 1 extra thing you need.
I would want it to be just the USB for computer, more easier just plug it in right away right?
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
I have just ordered 50 more boards, same style as the first batch. I estimate 1.5 months delivery. Hopefully they don't have component supply issues again!

Still working on the cases - 3D printing comes with its own set of challenges.

I have about 5 boards left from the first batch.
Bauxe
1,624 posts
Joined August 2012
Bauxe
My converter just came in today! Will test out and see if it's worthwhile.
Thievsly
3 posts
Joined January 2016
Thievsly
Got mine in the mail just now, unfortunately my drum decided to stop functioning this morning... so I have no way of testing it at this time :| if anyone has a spare one that I can borrow, I would be very grateful. I was planning on doing a series of videos.

Edit: the Aussie candies were a nice touch.
Korrui
75 posts
Joined April 2014
Korrui
Wow they look amazing (OCD is satisfied that they are all aligned)
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Thanks for everyone's support! The first batch is now sold out.

I expect the second batch by late April/early May. By then I should hopefully have nailed the case design too. People who have purchased this batch will be able to 3D print their own case :)
Korrui
75 posts
Joined April 2014
Korrui

montymintypie wrote:

Thanks for everyone's support! The first batch is now sold out.

I expect the second batch by late April/early May. By then I should hopefully have nailed the case design too. People who have purchased this batch will be able to 3D print their own case :)
Do you still have mine on hold? It's fine if you don't I can wait until the next batch but I will be able to buy it this weekend(Hopefully).
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

AnimeGod2205 wrote:

Do you still have mine on hold?
Yes! I wouldn't sell it after holding it so long, that'd just be rude.
Korrui
75 posts
Joined April 2014
Korrui

montymintypie wrote:

AnimeGod2205 wrote:

Do you still have mine on hold?
Yes! I wouldn't sell it after holding it so long, that'd just be rude.
Thanks!
Thievsly
3 posts
Joined January 2016
Thievsly
Anyone who needs one before May can pm me. I can't really afford a new drum with a baby on the way... $25 shipped. US buyers only.
MakkipMaster
5 posts
Joined December 2015
MakkipMaster
Ah! Mine came today! (I hadn't said earlier, but I had scrapped up enough money to buy one! ;3) I can't test it now since i'm actually still remodeling my drum, but I can do it later. I can update then! Thanks so much @montymintypie!! :D! (For the little gifts too :33)

EDIT: I had finished fixing my drum, and i've gotta say, this works wonders! I love it so much. There's no delay at all for me. I can now play songs that are not on TnT Wii with a tatacon, and effectively! Thank you again!! :3!
Last edited by MakkipMaster , edited 1 time in total.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Excellent to hear @MakkipMaster :)

New updates - I bought a 3D printer. Delivery sometime next week. If all goes well, this means I can add cases to all future converters for no extra cost :)
Korrui
75 posts
Joined April 2014
Korrui
Thats awesome!
Korrui
75 posts
Joined April 2014
Korrui
Woohoo finally got mine. It looks amazing. Works perfectly! I love the LED's. Great job. I was wondering if you could send me a 3d printed shell that I could add to it? I'd be willing to pay extra for it.
Loc
3 posts
Joined November 2014
Loc
-
Last edited by Loc , edited 1 time in total.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Super duper easy. Completely plug and play, with the Chrome app to change the key bindings.

3D printing is hard and the next batch is still being produced. Thank you all for your patience.
Korrui
75 posts
Joined April 2014
Korrui

Loc wrote:

I´ve been thinking for a while to use a tatacon, is it easy to install this?
Yes it is! You simply plu in the tatacon to the device, then plug the device in to your computers usb slot. Simple as that!
Chry
21 posts
Joined May 2013
Chry
Hey awesome project monty. I had bought a tatacon and all the wii crap a while back but once i got osu open I found myself drowning in lag ;-;
poor tatacon has been sitting in the closet for months now thanks to that. I wish i had known about your project beforehand. Do you have that next batch(with cases) finished yet? I'd love to have a converter.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie

Chry wrote:

Do you have that next batch(with cases) finished yet? I'd love to have a converter.
Still waiting - will email to determine the production delay. Cases are improving and almost ready :)
Chry
21 posts
Joined May 2013
Chry
Great no problem. Will patiently be waiting~ :) :D :D :D :D :D
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Received information from supplier:
-PCB has been ready.
-All of materials will be got on May 23.
-PCBA assembly will be started on May 24.
-The goods will be shipped on May 25.
Thus new estimate is Mid June for more stock :)
mizuki-chan_old_1
333 posts
Joined April 2016
mizuki-chan_old_1
Would be awesome, if that works...
Thinking about getting a tatacon drum maybe.
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
To all those following, thanks again for the patience :)

If you're thinking of buying one, could you fill this survey on case colour? I'll be able to offer white, black, blue and red and would like to know roughly how much to print of each. If there's big demand for another colour I will buy more filament.

PCBs have shipped and I should receive them within 2 weeks. It may take a bit longer to start shipping since that'll coincide with my exams for this semester. But almost there :D
mizuki-chan_old_1
333 posts
Joined April 2016
mizuki-chan_old_1

montymintypie wrote:

could you fill this survey on case colour?
Done.
Looking foward to get one, even if it will take a while :D
Aitortxo_old
1 post
Joined June 2016
Aitortxo_old
First of all, hi to the community. Noob here. Made an account just to write in this thread and discovered Osu! on the way :D

I wanted to congratulate montymintypie for such awesome board, one of the coolest I've seen in my life and this comes from someone with several Cave PCBs at home. I wanted to buy a couple of boards with blue and red boxes although my daughter would prefer pink :D I'll be checking for updates. Keep up the good work!
ToaKarn
19 posts
Joined February 2016
ToaKarn
Just wondering, when the first post said to expect a resupply this June, is that recent (2016)? Does it work with cheap knockoff Tatacons? And does osu! automatically detect it when plugged in? And will this batch have cases?
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Yes, this June 2016! This parcel is taking its time to arrive at my house...

I own both genuine and knockoff, works on both. Even works on the very expensive Hori controllers.

Osu doesn't need to detect the drum as it pretends to be a keyboard. However I do like navigating songs with the drum, expect that to come to osu when it becomes open source.

Yes to cases for this batch - printer is ready!
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Boards are here! Parcel sure took a beating...

SPOILER

I need to finish my exams then solder the boards up. I don't expect it to take more than a week from now.

The new revision is slightly smaller than the last and will fit the case better, too:
SPOILER
Old on top, new on bottom
montymintypie
85 posts
Joined October 2012
Topic Starter
montymintypie
Thoughts as I finalise cases - what option would people prefer?

  • Cases are glued and cannot be taken apart without snapping. Stronger.
    Cases are clipped and look a little worse, but can be taken apart if you want.
GMMAwesome
2 posts
Joined June 2013
GMMAwesome
Just got into Taiko and am interested in this.

I probably wouldn't mod it, so I would prefer the glued version.
show more
Please sign in to reply.

New reply

0
59 / 222
/