forum
Fifty's Tablet Covers
posted
Total Posts
108
Topic Starter
Valvalecia wrote:
Could've been slightly larger/better cut as there's a white line and it's little short from one side.
Otherwise no complaints, much better surface than my worn tablet and it's only 5$, so go buy one if you haven't already.
Thanks for the review, and I'm sorry for the poor cutting. I'm still working on getting some of models dimensions down.
I really want this, but how do i properly order this?
Should I send you a pm in skype/osu?
Should I send you a pm in skype/osu?
on discord
http://hnng.moe/35t
http://hnng.moe/35t
Topic Starter
Skype, osu, discord, whatever you prefer to use is fine with me!Cylux wrote:
I really want this, but how do i properly order this?
Should I send you a pm in skype/osu?
Will the adhesive eat away at my tablet? CTL-490 and do you have the dimensions for it? Cheers
edit: was told it wont damage it
edit: was told it wont damage it
Topic Starter
Absolutely. Keep in mind that I currently can't do cutouts for buttons. If there's enough demand for it, I'll look into patterns, but right now it's not possible for me to do it accurately enough.HolyShadowLink wrote:
Could I order the cover to fit my whole tablet?
I have been using the cover for a little over 2 weeks:
The cover feels very smooth but it does slowly turn a little more rough from dragging.
When it turns rough, it kind of feels like dragging on a piece of paper but it is still smoother than paper.
The looks of the cover is fairly similar to the picture I requested but it does have some faint white spots on it
that is only visible if you look at it from an angle with light reflecting off of it. Over time, your tablet area and scratches are
also going to be fairly visible on the cover but it isn't noticeable if you don't look at it from an angle with light.
Also, the cut on the cover wasn't 100% straight and the width was a tiny bit longer than I requested.
However, that I guess that can be fixed by yourself and I guess it is better to have it been little longer than risking it
to be a little shorter.
Shipping took about 3 business days (5 counting weekends) and it came on the same day that Fifty estimated
it to come. Fifty also replied back to me fairly quickly after I contacted him and everything went pretty smoothly.
Overall, I do recommend Fifty's tablet cover especially if you drag all the time on it like me
The cover feels very smooth but it does slowly turn a little more rough from dragging.
When it turns rough, it kind of feels like dragging on a piece of paper but it is still smoother than paper.
The looks of the cover is fairly similar to the picture I requested but it does have some faint white spots on it
that is only visible if you look at it from an angle with light reflecting off of it. Over time, your tablet area and scratches are
also going to be fairly visible on the cover but it isn't noticeable if you don't look at it from an angle with light.
Also, the cut on the cover wasn't 100% straight and the width was a tiny bit longer than I requested.
However, that I guess that can be fixed by yourself and I guess it is better to have it been little longer than risking it
to be a little shorter.
Shipping took about 3 business days (5 counting weekends) and it came on the same day that Fifty estimated
it to come. Fifty also replied back to me fairly quickly after I contacted him and everything went pretty smoothly.
Overall, I do recommend Fifty's tablet cover especially if you drag all the time on it like me
Had mine for my 420 for a month. Worked well and scratches didn't seem to have a negative effect.
Getting one for my CTL480
Getting one for my CTL480
Could it replace an older cover or is a problem? I mean will it stick to the surface normally?
Topic Starter
Absolutely. Although the adhesive is fairly strong (so it doesn't move around when you're playing) they are designed to be removable.S[u]nD[e]Yz wrote:
Could it replace an older cover or is a problem? I mean will it stick to the surface normally?
Just started using a tablet, I should pick up one of these.
Meanwhile I'm still waiting for mine 3 weeks and counting... QQ
Topic Starter
I'm sorry about that. Message me your info please. I'll figure out what went wrong.Osukaa wrote:
Meanwhile I'm still waiting for mine 3 weeks and counting... QQ
So, as a consumer of this product, was the quality of the picture very high? There's only been one review since Fifty has gotten his new printer and idk how the quality is now, heard his previous printer kinda washed out the colors. Care to share?Pituophis wrote:
Had mine for my 420 for a month. Worked well and scratches didn't seem to have a negative effect.
Getting one for my CTL480
Topic Starter
You can view many pictures on Discord. http://hnng.moe/35t The quality has greatly improved in comparison to my old printer.SmallerMoonstar wrote:
So, as a consumer of this product, was the quality of the picture very high? There's only been one review since Fifty has gotten his new printer and idk how the quality is now, heard his previous printer kinda washed out the colors. Care to share?
Hey Fifty, I've been wondering whether you've had any more thoughts on expanding onto mousepad covers? I recently got a new mousepad and the material feels slightly unpleasant when it's cold, and I was thinking I might benefit from trying a mousepad cover.
unless they make a perfect sensor that trakes perfectly fine with every surface and every color, that isn't a good idea for competitve gaming.. but if you just want a good looking mouse pad for.. i dunno.. anything that doesn't require fast/accurate movement and fifty got a nice surface for it that would be neatMahogany wrote:
Hey Fifty, I've been wondering whether you've had any more thoughts on expanding onto mousepad covers? I recently got a new mousepad and the material feels slightly unpleasant when it's cold, and I was thinking I might benefit from trying a mousepad cover.
tl;dr: a mouse pad with a pic on it is a bad idea for osu or compitive gaming in general
there was a talk about that few pages backward
I'd be willing to at least give it a shot and see how it works out for me. I tend to take everything Zenny says as an exaggeration because of how super OCD he is about his mice, and I'm unsure if I'd even notice the difference.
And yeah, I'm not super-competitive or anything in the first place, though you can probably tell
And yeah, I'm not super-competitive or anything in the first place, though you can probably tell
ye i would like to give it a shot as wellMahogany wrote:
I'd be willing to at least give it a shot and see how it works out for me. I tend to take everything Zenny says as an exaggeration because of how super OCD he is about his mice, and I'm unsure if I'd even notice the difference.
And yeah, I'm not super-competitive or anything in the first place, though you can probably tell
but it would hard to find a proper mat and it will take much effort than it would propaply worth
it's up to fifty tho
i want Ene on my mousepad <3
ZenithPhantasm
How is it exaggeration when I have proof for my claims? Its a well known fact mice perform suboptimally on different colored mousepads.Mahogany wrote:
I'd be willing to at least give it a shot and see how it works out for me. I tend to take everything Zenny says as an exaggeration because of how super OCD he is about his mice, and I'm unsure if I'd even notice the difference.
And yeah, I'm not super-competitive or anything in the first place, though you can probably tell
ZenithPhantasm
Because you'd notice any difference no matter how tiny, when it's something that I might not even notice at allZenithPhantasm wrote:
How is it exaggeration when I have proof for my claims? Its a well known fact mice perform suboptimally on different colored mousepads.Mahogany wrote:
I'd be willing to at least give it a shot and see how it works out for me. I tend to take everything Zenny says as an exaggeration because of how super OCD he is about his mice, and I'm unsure if I'd even notice the difference.
And yeah, I'm not super-competitive or anything in the first place, though you can probably tell
Topic Starter
I have in fact thought some more about this. I've got two strawpolls here, and on discord, that will help determine if this is viable or not.Mahogany wrote:
Hey Fifty, I've been wondering whether you've had any more thoughts on expanding onto mousepad covers? I recently got a new mousepad and the material feels slightly unpleasant when it's cold, and I was thinking I might benefit from trying a mousepad cover.
http://strawpoll.me/6609040
http://strawpoll.me/6609048
ZenithPhantasm
rubber mat with 15$ would be neatZenithPhantasm wrote:
Rubber mousepads are best. Washable, durable, consistent, and stable.
/poll
ZenithPhantasm
Topic Starter
Glass would be difficult to ship at a reasonable price.ZenithPhantasm wrote:
Glass mousepad would be nice too since no one makes them anymore. Never forget SS Icemat
In other news, custom rubber mousepads will be available soon, as the most voted for option.
\:D/
ZenithPhantasm
Topic Starter
I've run into some trouble with the rubber mouse pads. Upon testing the ink wears off under moderate-heavy use in a rather short timespan. I'm confident that cloth/fabric topped mouse pads would have a significantly longer lifespan. Now the question is what you guys would prefer.
As a side note, clear PBT sheets could work quite well, however the cost would be too high.
As a side note, clear PBT sheets could work quite well, however the cost would be too high.
ZenithPhantasm
Fukita
Not sure if i was scammed or he died or some shit but 2 weeks ago i bought one of these over skype and it still hasn't arrived and he is not replying
Topic Starter
I don't have any unread messages on Skype, but it could just be my skype being buggy. Please PM me your info, and I'll get this sorted out. Sorry for the trouble.Shikese wrote:
Not sure if i was scammed or he died or some shit but 2 weeks ago i bought one of these over skype and it still hasn't arrived and he is not replying
Topic Starter
Absolutely. I can make them for any tablet model.Your_Doge wrote:
Would you do them for the new intuos tablet?