I am very sorry for the delay. A lot of unexpected things happened lately. (Yes><, from injury(T_T) to extra work from my professors )
非常感谢你的MOD。 GREAT MODDERSatilast wrote:
Azusa (Azu-nyan~)=3:
NCs:SPOILERNCs are kinda fixed. There are still some problems with it.00:06:727 (8)
00:17:072 (10)
00:21:210 (8)
00:25:090 (1)
00:45:924 (5)
00:58:127 (6)
01:02:195 (6)
01:14:398 (5)
01:18:466 (5)
___________
00:30:262 (5,6,7,8) - can make as here 00:17:848 (11,12,13,14) Great suggestion, but I don't want to use too much of it since I have 2-3 already. However, it is a great option when comes to replacement.
This star prettier:SPOILERI can tell the difference, thank you.184,297,34141,5,0,0:0:0:0:
256,56,34400,1,0,0:0:0:0:
328,297,34658,1,0,0:0:0:0:
136,160,34917,1,0,0:0:0:0:
384,160,35176,1,0,0:0:0:0:
00:54:695 (6) - on x:488 y:216I have done the previous arrangement because I don't want to go out of bounds.We will see. A little bit might be OK
Good Luck! Thank you =)
Great mod, thank you very much! =3
-----------------------------------------------------------------------------------------------------------------------------------------------sammy711 wrote:
Azusa
AR-1 这个BPM不要用AR9 除非你用了八分音符 这个我会去考虑,谢谢提醒。
00:08:423 (2,3) - 这两个和滑条尾对齐 做出perfect blanket 这样的问题其实我有特意去改,结果还是歪了么= =
00:09:846 (7) - NC √
00:10:622 (10) - Nonsense 请把这个放在00:10:880 (1) - 的起点 其实现在这样干的图很多。只不过三连最后那两个移到外面去,我的是后面两个到外面去。每次见到我也很烦,同意改掉><
00:15:018 (5) - 会让人confused 改掉 我觉得没啥问题吧,这图本来就容易。你要是说难看我倒会很同意。我试着改改吧
00:16:311 (6) - NC√
00:17:863 (6,7,8,9) - 要跳就要再跳一点 把这个梗放大一点吧OK
00:20:061 (3) - 删掉 不符合节奏 然后把后面的note放在00:19:673 (2) - 的结尾保留,我会去看看有哪些更好的排列
00:22:260 (3,4,5) - 扩大距离 要让人看出来是单点我是因为这个原因没扩大距离的。我是特意改成跟1和2相符的形状。再说,这图这么容易,没必要再改容易。
00:26:139 (7,8,9,10) - 推荐放在同一个坐标上 我觉得更好一点我取一半吧,把n形的改成向u形,其实n形是我为了不出界而出的下策。
00:28:984 (1,2) - ctrl+G 要跳起来 而且还能提示有节奏间隔谢谢,非常同意
00:29:501 (3) - ^同上√
00:30:794 (6) - 和滑条3的起始点对上
00:31:311 - Add a note 与00:30:536 (5) - 重叠[/color]
00:44:159 (2) - ctrl+G虽然这两个CTRL+G我都改了,但是我会继续看看这里跳合不合理
01:16:701 (2) - ^同上
00:45:938 (5) - NC
01:20:260 (1) - NC
Good luck!