RandomJibberish wrote:
I'm pretty sure Sappha was referring to these
which I'm adding now, along with mm's symmetrical circles tutorial because it's that smexy.
That's work better I think.
show more
That's work better I think.
You want a red point for every QUARTER of the arc. Between every 2 red points (the very first point also counts as a red point, since the slider passes there 100%), you want at least two white points. (usually two is enough) Align the two white points on both sides of the red point in a way that they are in a straight line. In math terms, if you drew a circle along the center of the arc slider's path, the line formed by connecting the white-red-white points should form a tangent to the circle.
Because of this, especially if your red points fall perfectly along either of the two center lines, you should only need to adjust the white points in one direction (up/down for the ones neighbouring the left red point, for example, in mm's picture). As your circle is lined up with red points at 90 degrees, all the points except for the very end should be rotationally symmetrical, so check that with Ctrl+. and Ctrl+, .
Once you have the points adjacent to red points down, just fiddle with the "end bit" (the bit below the left red point in mm's picture). Sometimes it'll go into that position easily, sometimes you might want an extra point there just to fine-tune.
Since this relies on red points instead of white ones, you can also very easily insert large arcs into your other slider art this way.
EDIT: And I feel like I made it sound more complicated than it is.
Double loops work exactly as you'd expect. Just make sure each loop is nice and round and that the whole slider retains its symmetry
I'm basically going to do such ridiculous things as those in the future, but for now, I want to keep it as silly as that handlebar loop.
By the way, I'm curious to see the control points for those sliders.
Also, it's funny that Sakura should mention zodiac signs, because I kind of want to do a Libra slider pattern. That would be so sexy.
Also red anchors :v
Capricorn is kinda ugly. Also the symbol has 2 ways of being written but I like this way more.
http://osu.ppy.sh/ss/148159 Cancer
This loop was hella hard to do with the acr after it. Actually it's ugly if you're really picky (like me...)
http://osu.ppy.sh/ss/148160 Gemini
Quite easy actually, there's an uglyness on the arcs though, look carefully.
I'll leave the rest to whomever wants to do the rest.
Sorry for the OT
or this, but don't know if that counts
I fail at stuff like this.
*rimshot*
ps lily ily
The slider type kinda kills the slider itself for me, though. I think it'd look much nicer with mmsliders. Right now the slider type makes it non-symmetrical-looking. D:
So, to be picky, it's 55.22847498%. The smaller the arc, the fewer grids/osupixels of difference.
Derekface Butterfly
GONZ WHAT IS THAT MONSTROSITY
I THOUGHT THAT YOU WERE PUNCHING TERRORISTS, NOT BEING ONE
Is this an okay way of making wave sliders?
DEEDIT: Just a happy little contribution with some circle size 2 blankets (AR0 to show distant objects):
Interlocking magic.
Almost a 'Glamorous Sky' overlap, but AR3 + slider snaking prevents the overlap elegantly.
Not totally perfect, but I had to take the bottom slider out of snap and it took forever to make it work at all:
Fancy circular blanketing:
Horizontal symmetry is created with circles (yes, they line up perfectly):
I feel good with making 3-node(very simple) sliders :>
show more
That's work better I think.
Holy CRAP that beat blanket science is genius
Add Krisom sliders lol. So I won't fail at copying the osu and then ruining the slider because of different BPM/SV. Haha.
How about double loops too?
Odaril's awesome blanket!
Odaril's delicious loop!
How about double loops too?
Odaril's awesome blanket!
Odaril's delicious loop!
I make loop sliders like this, and just wanted to put it into words, as in my opinion, it is the easiest one to pull off.mm201 wrote:
Edit: In other news, loop sliders for lazy people:
You want a red point for every QUARTER of the arc. Between every 2 red points (the very first point also counts as a red point, since the slider passes there 100%), you want at least two white points. (usually two is enough) Align the two white points on both sides of the red point in a way that they are in a straight line. In math terms, if you drew a circle along the center of the arc slider's path, the line formed by connecting the white-red-white points should form a tangent to the circle.
Because of this, especially if your red points fall perfectly along either of the two center lines, you should only need to adjust the white points in one direction (up/down for the ones neighbouring the left red point, for example, in mm's picture). As your circle is lined up with red points at 90 degrees, all the points except for the very end should be rotationally symmetrical, so check that with Ctrl+. and Ctrl+, .
Once you have the points adjacent to red points down, just fiddle with the "end bit" (the bit below the left red point in mm's picture). Sometimes it'll go into that position easily, sometimes you might want an extra point there just to fine-tune.
Since this relies on red points instead of white ones, you can also very easily insert large arcs into your other slider art this way.
EDIT: And I feel like I made it sound more complicated than it is.
Most Krisom sliders are made based off the simple shapes if I remember correctly. And symmetry, that's cool too. So make your own special sliders instead of copying Krisom's because that's cooler anyway.Raging Bull wrote:
Add Krisom sliders lol.
Topic Starter
As Sappha said, master the basics and all of krisom's shapes are pretty easy. Krisom Krosses are just a pair of waves, there are blankets with linear bits off them, etcRaging Bull wrote:
Add Krisom sliders lol. So I won't fail at copying the osu and then ruining the slider because of different BPM/SV. Haha.
How about double loops too?
Double loops work exactly as you'd expect. Just make sure each loop is nice and round and that the whole slider retains its symmetry
I would add this type of loop, since I'd rather people did this than eyeballed it (lol), but once you've had practice it's easier not to fuck up with the other method, and you get automatic symmetry. Idk, I might add it stillKytoxid wrote:
lots of stuff
It's an okay method. I think iNiS used it in Ouendan2 to create those really funky sliders on certain maps, combining 2 or more part circles of different radii together. Up until the most recent builds, red points had some small bugs making them a little inaccurate, which I think plays a part in their unpopularity, at least with smooth shapes.
Speaking of redpoints, how are these, given that I'd effectively rammed them out in the space of a minute?
Topic Starter
Looking great! Could probably have slightly rounder curves, but I'm pretty sure even I wouldn't see that in game.
Yeah, I kind of wish that I could've got them rounder, because they're noticeable in Easy. I'd fiddled around with the points a bit, but the sliders would either kink weirdly or become too squishy. Thanks! :3
For the record, these are the points:
Pretty much as even as I could get them.
For the record, these are the points:
Pretty much as even as I could get them.
^I looooooooooove those kinds of sliders.
For those kinds of U-shaped elbows, I would combine the "lazy circle" technique with the regular elbow method.
Otherwise, getting perfect 180° circles is much harder than other angles.
(hmmm I might keep something like this since the song is about magnets...)
Otherwise, getting perfect 180° circles is much harder than other angles.
(hmmm I might keep something like this since the song is about magnets...)
That's pretty fantastic. Getting a properly rounded 'U' is a pain when using a regular arc.
DEEDIT: This 'PONPONPON' map sure is getting fun.
DEEDIT: This 'PONPONPON' map sure is getting fun.
Im lazy u_u
Something basic?
Hmm, This wave slider is Easy to learn and good...
Hmm, This wave slider is Easy to learn and good...
You can also do them like this, but Larto hates me for it.
Topic Starter
Jar you suck at aligning the endpoint
Also doing sliders that way looks a little wonky, but it's pretty damn good.
Also doing sliders that way looks a little wonky, but it's pretty damn good.
I dunno; that endpoint looks pretty damn in place. By the way, I'm trying to get Jar to use more points for his waves, as they tend to be pretty pointy. At least two three-point arcs, but he should totally use the OP madstyle waves instead.
Also, I've been having a bucketload of fun with various sliderarts, which include heart sliders, rotationally symmetrical wiggles and a massive loop thing with handlebars. Should I bother to post them here? I wouldn't want to inundate the thread with my pratting around.
Also, I've been having a bucketload of fun with various sliderarts, which include heart sliders, rotationally symmetrical wiggles and a massive loop thing with handlebars. Should I bother to post them here? I wouldn't want to inundate the thread with my pratting around.
it's off by 2 pixels
Topic Starter
I'm pretty sure Jar sliders are improving and getting less pointy. I don't really mind them anyway, it's Jarby charm.
Oh, and we love a bit of pratting around
Oh, and we love a bit of pratting around
Pratting around, you say? Okay, have a load of sliders which are a bit more fancy than stitching together arcs and lines with redpoints.
LOOP SLIDER:
CIRCLE WRAP:
KRISS-KROSS:
ROTATIONALLY SYMMETRICAL WIGGLE:
HEART SLIDER:
This... Thing.
Note that I'm not trying to sell these as perfect sliders or anything, but I've been having a lot of fun with them recently and I tend to get a kick out of sharing this sort of thing so yeah.
LOOP SLIDER:
CIRCLE WRAP:
KRISS-KROSS:
ROTATIONALLY SYMMETRICAL WIGGLE:
HEART SLIDER:
This... Thing.
Note that I'm not trying to sell these as perfect sliders or anything, but I've been having a lot of fun with them recently and I tend to get a kick out of sharing this sort of thing so yeah.
Thanks!, this guide help me so much, specially in loops
BD's first slider made me think of Taurus symbol (and why all of a sudden i want to see sliders that resemble the zodiacal symbols?)
Blue Dragon wrote:
D33d wrote:
I'm basically going to do such ridiculous things as those in the future, but for now, I want to keep it as silly as that handlebar loop.
By the way, I'm curious to see the control points for those sliders.
Also, it's funny that Sakura should mention zodiac signs, because I kind of want to do a Libra slider pattern. That would be so sexy.
Protip: I automatically love anyone who makes sliders like those.
How can you make sliders like those ಠ_ಠ
ImaginationnnnnnnnnVerdisphena wrote:
How can you make sliders like those ಠ_ಠ
Also red anchors :v
Whyyyy are the first and last sharp corners not directly on ticks you monster. THEY'RE SO CLOSE.Blue Dragon wrote:
http://osu.ppy.sh/ss/148154 CapricornSakura Hana wrote:
BD's first slider made me think of Taurus symbol (and why all of a sudden i want to see sliders that resemble the zodiacal symbols?)
Capricorn is kinda ugly. Also the symbol has 2 ways of being written but I like this way more.
http://osu.ppy.sh/ss/148159 Cancer
This loop was hella hard to do with the acr after it. Actually it's ugly if you're really picky (like me...)
http://osu.ppy.sh/ss/148160 Gemini
Quite easy actually, there's an uglyness on the arcs though, look carefully.
I'll leave the rest to whomever wants to do the rest.
Sorry for the OT
http://osu.ppy.sh/ss/148166 Scorpio
http://osu.ppy.sh/ss/148167 Taurus
Scorpio is unrankable though, what a shame
http://osu.ppy.sh/ss/148167 Taurus
Scorpio is unrankable though, what a shame
Not perfect, but sexy.Krisom wrote:
http://osu.ppy.sh/ss/148159 Cancer
But aren't there 2 types of Kris-Krosses?
The Inchworm:
The Sidewinder:
The Inchworm:
The Sidewinder:
That looks sexymm201 wrote:
The Inchworm:
To reference a map of mine, just to show how I butchered thatmm201 wrote:
The Inchworm:
or this, but don't know if that counts
Topic Starter
narakucrimson said: "Let there be a slider inspiration gallery!" - and then it was so.
that would be tremendous if it were symmetrical...
I hope to put something of really useful here, btw here you are some ideas:
Xmas' tree
Extended Loops
Crushed slider
Spirals
(with and without anchor points)
Heart sliders
Other stuff/patterns (please read notes where is needed)
Xmas' tree
Extended Loops
Crushed slider
Spirals
(with and without anchor points)
Heart sliders
Other stuff/patterns (please read notes where is needed)
SPOILER
(<- you need to use a velocity slider's varation here)
(<- classic shape, just with a little varation: there's an anchor point that helps you to make the slider in a short time)
(for a good flow)
I fail at stuff like this.
I loled
Please tell me that's Bad Apple!
Please tell me that's Bad Apple!
Nah, it's just a badly made apple.mm201 wrote:
I loled
Please tell me that's Bad Apple!
*rimshot*
ps lily ily
this looks so complicated
Topic Starter
It isn't too difficult once you get the hang of it. Just follow it step by step, and don't be afraid to ask if you have problems.
I forgot if this has already been mentioned, but in the case of sliders (especially arcs) looking too squishy/pointy, ensure that the points are equidistant from each other. I see a lot of symmetrical sliders which look squishy or pointy, when they could easily be made smoother by some simple adjustments.
where did you get the osu! stream skin
Topic Starter
It's available to osu!stream mappers for mapping purposes. No, you can't have it.
oh okay
Holy shit, that actually works flawlessly. I'm guessing that it's always a difference of one grid?mm201 wrote:
it is so hard for me
you people call these SLIDERS
yes
I call them calculus and trigonometry!OzzyOzrock wrote:
you people call these SLIDERS
what are those
Yes, it was a solo map I did.mm201 wrote:
I loled
Please tell me that's Bad Apple!
I think it could be called "roller coaster" slider
Slider node art!
This.Derekku wrote:
Slider node art!
The slider type kinda kills the slider itself for me, though. I think it'd look much nicer with mmsliders. Right now the slider type makes it non-symmetrical-looking. D:
[url]http://en.wikipedia.org/wiki/Bézier_spline#Approximating_circular_arcs[/url]D33d wrote:
Holy shit, that actually works flawlessly. I'm guessing that it's always a difference of one grid?mm201 wrote:
So, to be picky, it's 55.22847498%. The smaller the arc, the fewer grids/osupixels of difference.
Close enough in any case. Any slight differences can be adjusted anyway, and I'm already having a much easier time with elbows.mm201 wrote:
[url]http://en.wikipedia.org/wiki/Bézier_spline#Approximating_circular_arcs[/url]D33d wrote:
Holy shit, that actually works flawlessly. I'm guessing that it's always a difference of one grid?
So, to be picky, it's 55.22847498%. The smaller the arc, the fewer grids/osupixels of difference.
I find using the Reverse selection (Ctrl+R) very useful in making sliders symmetrical. That way you know the corrdinates of the endpoint.
EDIT: Though this is a good tutorial
EDIT: Though this is a good tutorial
That's basically the same as ctrl+H.BeatofIke wrote:
I find using the Reverse selection (Ctrl+R) very useful in making sliders symmetrical. That way you know the corrdinates of the endpoint.
EDIT: Though this is a good tutorial
And reverse can ruin the slider
Probably the best way to make symmetrical sliders is to make make a copy of your slider and paste a quarter note after your original slider. Then do the horizontal flip/reversing before trying to align the nodes to fit the shape. That way you have a constant replica that you can follow at all times.
Topic Starter
Not if the sliderend lines up with the last point properly, or if the second to last point is a red one.OzzyOzrock wrote:
And reverse can ruin the slider
Is THAT why you used to abuse redpoints?RandomJibberish wrote:
Not if the sliderend lines up with the last point properly, or if the second to last point is a red one.OzzyOzrock wrote:
And reverse can ruin the slider
GONZ WHAT IS THAT MONSTROSITY
I THOUGHT THAT YOU WERE PUNCHING TERRORISTS, NOT BEING ONE
Topic Starter
Actually I used to abuse redpoints because the threshold of where the slider snaps back to the next tick was too low - it was impossible to line the sliderend up with the last node. I was always too lazy to endpoint nudge like mm or witchcraft symmetrify like m980, so I did the redpoint thing.
Oh oh oh, I know that heart sliders are old news, but I felt like sharing this heart slider that I made for Jarby a while back, because I'm still reasonably pleased with it.
One of these days, this medley will be finished.
DEEDUPDATE: I tried to make a spiral slider.
One of these days, this medley will be finished.
DEEDUPDATE: I tried to make a spiral slider.
Use the Scale tool to grow that spiral enough so that its borders don't touch.
How do you do the sign for infinity (an 8 lying down) with a relatively short slider?
My current one looks like this: http://gyazo.com/fdc74d9ce6807d6bd73774e31e609252
Please help me
My current one looks like this: http://gyazo.com/fdc74d9ce6807d6bd73774e31e609252
Please help me
This is sexy.
I has stuff... o3o
Yeah... they probably all suck, but I love them anyway... XD
Yeah... they probably all suck, but I love them anyway... XD
Learn to use fewer nodes. Your life will be a lot easier that way.
Also, somebody needs to come up with a tidy way of making spirals, because I haven't seen them made without a messy mess of points.
Also, somebody needs to come up with a tidy way of making spirals, because I haven't seen them made without a messy mess of points.
Topic Starter
THERE IS NO WAAAAY
There has to be one! Help me on my quest to make osu!stream-worthy spirals.RandomJibberish wrote:
THERE IS NO WAAAAY
Topic Starter
Construct a perfect spiral in illustrator or something, export as image, set as background, line up slider, scale as needed. That should work.
Is this an okay way of making wave sliders?
m980 used to make some that way a long time ago. It's harder to get them looking as smooth as with other methods.
Yeah, just use nodes. It's not hard to make sliders without the anchor in the middle--just move points around until you have two smooth arcs.
Oh man this thread is awesome hnng.Mappers should pay more attention to the sliders, some make you want to
Its really a pain to mod, I swear to god If I see a map with bad sliders, I'll link this thread in my modpost.RandomJibberish wrote:
commit suicide
Good. RJ created this thread in order to save time during his own mods. However, bear in mind that some sliders don't have to be perfect if they're simple, although it definitely helps if they are. Such basics as making tidy sliders and patterns ought to be imposed on mappers more often, especially those who are new. Jarby pestered me countless times to look at this thread until I got sliders right and I have few problems with them now.Lolicore Flandre wrote:
Oh man this thread is awesome hnng.Mappers should pay more attention to the sliders, some make you want toIts really a pain to mod, I swear to god If I see a map with bad sliders, I'll link this thread in my modpost.RandomJibberish wrote:
commit suicide
DEEDIT: Just a happy little contribution with some circle size 2 blankets (AR0 to show distant objects):
Interlocking magic.
Almost a 'Glamorous Sky' overlap, but AR3 + slider snaking prevents the overlap elegantly.
Not totally perfect, but I had to take the bottom slider out of snap and it took forever to make it work at all:
Fancy circular blanketing:
Horizontal symmetry is created with circles (yes, they line up perfectly):
D33d oh my hnng
also what I saw today
also what I saw today
That's just more effort than is needed. Why they couldn't create those chevrons out of five points is beyond me. Never mind the fact that they could just copy one slider and rotate it, but they probably haven't met the rotate tool.
No matter how hard I try, I can never ever make good looking sliders. ;_;
Topic Starter
You can do if if you BELIEVE!
seriously though, if you have any specific issues we can totes sort you out
seriously though, if you have any specific issues we can totes sort you out
Ah, I agree your sayingRandomJibberish wrote:
You can do if if you BELIEVE!
seriously though, if you have any specific issues we can totes sort you out
I feel good with making 3-node(very simple) sliders :>
omg Real the last one....
I know right