It's not possible to animate ranking lettersPegasius wrote:
Hello, is it possible to animate ranking letters (ranking-A)? I tried it and followed instructions by adding -0...-n where n was number of frames, but it didn't work -.-" any help would be much appreciated.
forum
Skinning tutorial (+ skinning support)
posted
Total Posts
4,226
DeletedUser_4041880
No.Pegasius wrote:
Hello, is it possible to animate ranking letters (ranking-A)? I tried it and followed instructions by adding -0...-n where n was number of frames, but it didn't work -.-" any help would be much appreciated.
Edit: HINEWPAGE!
please help...i tried to resize but it still like that...
https://osu.ppy.sh/forum/t/232060
sorry for my bad English ..
https://osu.ppy.sh/forum/t/232060
sorry for my bad English ..
I will say it again, you can't use full widescreen images for spinner-metre.png.JESSFLOW wrote:
please help...i tried to resize but it still like that...
https://osu.ppy.sh/forum/t/232060
sorry for my bad English ..
This time I will give you the dimensions you should work with: 1024x692 for spinner-background.png AND spinner-metre.png
Is there any word if widescreen support for spinner-metre is going to happen? I tried searching but couldn't really find anything on it. Been out of loop for quite a long time.
ive gotten pretty much everything to work like i would want it to other then spinner-osu for somereason its not showing up after i clear a spinner any ideas?
spinner-osu.png won't work in skins using version 2 or higher.
is anyone have raw file of taiko-bar-left?
I'm really need it for my skin
and sorry if i don't read the previous post
sorry, i mean from latest original osu skin
I'm really need it for my skin
and sorry if i don't read the previous post
sorry, i mean from latest original osu skin
Try changing the skin version?KeNooby wrote:
ive gotten pretty much everything to work like i would want it to other then spinner-osu for somereason its not showing up after i clear a spinner any ideas?
yes is it because version 2.0+using new spinner versionHaskorion wrote:
spinner-osu.png won't work in skins using version 2 or higher.
please read section "Skin Version"
Anyway did anyone know new mod icon file name?
Got its name freshly from deadbeat:-Chitose- wrote:
Anyway did anyone know new mod icon file name?
selection-mod-keycoop.png
Co-Op simply splits every key count into 2 playfields right now and also enables 10K, 12K, 14K, 16K, and 18K.
So you can maybe start skinning for this keycounts aswell.
Thanks alot, i also tried to figure out the name for itHaskorion wrote:
Got its name freshly from deadbeat:-Chitose- wrote:
Anyway did anyone know new mod icon file name?
selection-mod-keycoop.png
Co-Op simply splits every key count into 2 playfields right now and also enables 10K, 12K, 14K, 16K, and 18K.
So you can maybe start skinning for this keycounts aswell.
Anyone know if you can make it so that the reverse arrow changes color based on the combo color?
I really have no idea if someone already posted this, but how does one change this:
So that it turns blue instead of red?
I have tried looking in the skin.ini, and changing things around, but it doesn't do anything at all.
Thanks in advance!~
So that it turns blue instead of red?
I have tried looking in the skin.ini, and changing things around, but it doesn't do anything at all.
Thanks in advance!~
I'm maked default in photoshop. When i began creating that note, i put a transparent background. Just look at screenshot and tell me how to fix that white pixels.
Is the .png file already blue in colour or...?MasterSonic10 wrote:
I really have no idea if someone already posted this, but how does one change this:
So that it turns blue instead of red?
I have tried looking in the skin.ini, and changing things around, but it doesn't do anything at all.
Thanks in advance!~
(And BTW which one are you referring to? the circle or the midpoint?)
Where is the white pixel? I don't see any (or is it that I gotta change my glasses? ._.)Hinei wrote:
I'm maked default in photoshop. When i began creating that note, i put a transparent background. Just look at screenshot and tell me how to fix that white pixels.
look at left and rigth sidedws123 wrote:
Is the .png file already blue in colour or...?MasterSonic10 wrote:
I really have no idea if someone already posted this, but how does one change this:
So that it turns blue instead of red?
I have tried looking in the skin.ini, and changing things around, but it doesn't do anything at all.
Thanks in advance!~
(And BTW which one are you referring to? the circle or the midpoint?)Where is the white pixel? I don't see any (or is it that I gotta change my glasses? ._.)Hinei wrote:
I'm maked default in photoshop. When i began creating that note, i put a transparent background. Just look at screenshot and tell me how to fix that white pixels.
DeletedUser_4041880
I havent pixels when open this files with graph redactor...
DeletedUser_4041880
oreNa_
https://www.youtube.com/watch?v=pecDzaGxR1M like in this video, how do you make the slidertrackoverride the same color as your combo color?
thx
thx
In the skin.ini file, there should be this line:Im Black wrote:
https://www.youtube.com/watch?v=pecDzaGxR1M like in this video, how do you make the slidertrackoverride the same color as your combo color?
thx
SliderTrackOverride: 196,146,202Simply remove it or write it like this:
//SliderTrackOverride: 196,146,202This will remove the SliderTrackOverride color and change it to the current combo color.
Has the playfield been removed?
It's done for, yes
it has been for some time.AussieEvil wrote:
Has the playfield been removed?
I've been trying for a while now to make my own mania skin. I made my keys using Paint.net, basically drawing over a key I copied from another skin. The problem is that once I set the key and key@2x in the .ini file, it doesn't load properly. Namely, the color and design works, but the key doesn't scale to the right height. It covers the lower half of the key space, and actually shrinks to it, but the top half is black. I've been looking for some info on key height/width, but haven't found anything online. I'm stumped.
Don't assign HD elements in the skin.ini. Remove the "@2x" from every line. The game is coded for 1024x768 resolutions so you need to assign SD elements in the skin.ini.
I checked and I think the new scorebar offset is 12x13 (24x26 @2x).
We already had this cleared up and it's [12,12] for scorebars with marker and [5,16] for scorebars with ki.JapanYoshiTheGamer wrote:
I checked and I think the new scorebar offset is 12x13 (24x26 @2x).
lighting.pngHaganenno wrote:
Hello,
What is the file name for hit lightning?
Mania:
lightingN.png
lightingL.png
Inori wrote:
lighting.pngHaganenno wrote:
Hello,
What is the file name for hit lightning?
Mania:
lightingN.png
lightingL.png
Thanks
Someone knows where I can download the new default menu sounds please ? (see below)
This thread might be useful for you. Has the default skin as a template, which includes a few of those sounds.Angelo wrote:
Someone knows where I can download the new default menu sounds please ? (see below)
Does anyone know the fonts used in the various elements for osu? Things like:
- Logo (the new one used in-game, not the site logo which has Verdana)
- Chat (not Tahoma)
- Hitmarkers (50's, 100's, Geki, etc.)
- Score
The font used in logo, chat, and hitmarkers should be Aller. No idea about score but I think it looks p similar to EXO2
Not sure if this has been answered, but I can't seem to enable song select thumbnails for custom skins. I have them enabled in the options and I have the skin's .ini version 2.2, but the thumbnails still don't show up.
Make sure you wrote it under the [General] section and start 'Version: 2.2' with a capital letter. Missing capitalization is a major mistake I often see on skin.ini-files.Sanxu wrote:
Not sure if this has been answered, but I can't seem to enable song select thumbnails for custom skins. I have them enabled in the options and I have the skin's .ini version 2.2, but the thumbnails still don't show up.
I already know this topic and the sounds I was searching for are not there, but thanks anyway for trying to help :/Storb wrote:
This thread might be useful for you. Has the default skin as a template, which includes a few of those sounds.Angelo wrote:
Someone knows where I can download the new default menu sounds please ? (see below)
If someone else knows how to get the hitsounds mentioned above, please tell me
I could have sworn the v was capital, could barely tell the difference in notepad. Thanks mate.Haskorion wrote:
Make sure you wrote it under the [General] section and start 'Version: 2.2' with a capital letter. Missing capitalization is a major mistake I often see on skin.ini-files.Sanxu wrote:
Not sure if this has been answered, but I can't seem to enable song select thumbnails for custom skins. I have them enabled in the options and I have the skin's .ini version 2.2, but the thumbnails still don't show up.
Tried to make *all* of those and *all* files listed there do work. (not sure for other formats)Angelo wrote:
Someone knows where I can download the new default menu sounds please ? (see below)
It's not bundled in the template though.
Hello mates, how to fix it? I have a problem w/ stacking numbers after >9 combo in a row~open your skin.ini and change the value of "HitCircleOverlap: *numbers*"Kripparium wrote:
:?: Hello mates, how to fix it? I have a problem w/ stacking numbers after >9 combo in a row~
i believe the value is more than 20, change it to 0 or between 1-10
This is not help. On picture HitCircleOverlap: 0 (1, 2, 3 etc. tryed it all).Rio- wrote:
open your skin.ini and change the value of "HitCircleOverlap: *numbers*"
i believe the value is more than 20, change it to 0 or between 1-10
That method (HitCircleOverlap: *image width, height) works on dots perfectly, not on numbers
The overlap at 10 onwards is inevitable.
The overlap at 10 onwards is inevitable.
This not what I want, but thank you anywayFatal3ty wrote:
Method for Kripparium:
Hitcircleoverlay-0.png make a Hitcircle
default-0.png - default-9.png make a numbers without Circle!
Change Skin.ini - Hitcircleoverlap: 0
Change Skin.ini - HitcircleAboveNumbers: 0 to 1
Or I dont understand you...
What to do with item 1? Item 2 - only numbers 1-9 in 160-160 pngbox?
Only Numbers 1-9, see it in Peppys Template Skin (Numbers is not 160x160px!!)Kripparium wrote:
This not what I want, but thank you anywayFatal3ty wrote:
Method for Kripparium:
Hitcircleoverlay-0.png make a Hitcircle
default-0.png - default-9.png make a numbers without Circle!
Change Skin.ini - Hitcircleoverlap: 0
Change Skin.ini - HitcircleAboveNumbers: 0 to 1
Or I dont understand you...
What to do with item 1? Item 2 - only numbers 1-9 in 160-160 pngbox?
HitcircleAboveNumbers: 1 is right. (0 is disable, 1 is enable)
Ah, okay, thank you!Fatal3ty wrote:
Only Numbers 1-9, see it in Peppys Template Skin (Numbers is not 160x160px!!)
HitcircleAboveNumbers: 1 is right. (0 is disable, 1 is enable)
Hello everyone im making an own skin but i have a problem, the parts, menu-button-background, fail-backgroun and ranking panel dont work and i dont know why, can anybody maybe help me?
Are they in .png format? Are you playing widescreen? If so then add @2x at the end of the name, like menu-button-background@2x.
I want to make this skin without sliderends: http://puu.sh/fEX5t/bbd2f6944f.osk
Can someone do this for me or tell me how?
This skin is not mine, I just found it on reddit. All credits go to him.
Ty
Can someone do this for me or tell me how?
This skin is not mine, I just found it on reddit. All credits go to him.
Ty
the problem is I dont know how to create a circle around the number.
I have no experience with this. :/
I have no experience with this. :/
This helps me a lot, thanks.Fatal3ty wrote:
Method for Kripparium:
Hitcircleoverlay-0.png make a Hitcircle
default-0.png - default-9.png make a numbers without Circle!
Change Skin.ini - Hitcircleoverlap: 0
Change Skin.ini - HitcircleAboveNumbers: 0 to 1
Here you go. Really easy using the alternative method from Franzium--wherein you replace hitcircle.png and hitcircleoverlay.png with an invisible picture, and make hitcircleoverlay-0.png your regular hitcircle.xDesmond wrote:
I want to make this skin without sliderends: http://puu.sh/fEX5t/bbd2f6944f.osk
Can someone do this for me or tell me how?
This skin is not mine, I just found it on reddit. All credits go to him.
Ty
One caveat, however--hitcircles will no longer show the proper combo colors. This is the one unavoidable catch with having removed slider ends.
Can anyone tell me the default resolution of multi-skipped.png? And is there a limit to the amount of frames usable in elements that can be animated (e.g. play-skip, menu-back--can these have an infinite amount of frames for an animation)?
EDIT: In addition, is there a way to remove the desaturated effect that occurs when you fail a song in multiplayer? Disabling in-game shaders does disable the near-failure red overlay, but this effect is otherwise unaffected.
Ty for helping me but is there another method where I can use proper combo colors?
From what I know, probably no. You'll have to use hitcircle.png to use proper combo colors but this also kills the effect of "no slider end circles".xDesmond wrote:
Ty for helping me but is there another method where I can use proper combo colors?
Greetings
So, I am in the middle of making a skin, which I want to be quite minimal. I managed to make some hitbursts (the 300s to be exact) invisible but that also made them invisible on the ranking board. My question being, is it possible to make them invisible in-game without altering their rank board visibility ?
So, I am in the middle of making a skin, which I want to be quite minimal. I managed to make some hitbursts (the 300s to be exact) invisible but that also made them invisible on the ranking board. My question being, is it possible to make them invisible in-game without altering their rank board visibility ?
yes. it is. you can use both 300.png and 300-0.png
300.png will appear on the ranking panel and 300-0.png will appear while playing
300.png will appear on the ranking panel and 300-0.png will appear while playing
Sorry if i posting in wrong place, pls notice me.
Do somebody still keep the SAO II health bar .psd file ? Since the OP has been banned but i very like that health bar. I need that psd file so i can self-edit my own.
Thanks
Do somebody still keep the SAO II health bar .psd file ? Since the OP has been banned but i very like that health bar. I need that psd file so i can self-edit my own.
Thanks
Thank you very much!deadbeat wrote:
yes. it is. you can use both 300.png and 300-0.png
300.png will appear on the ranking panel and 300-0.png will appear while playing
Does anyone have a complete list of which menu audio elements are skinnable? And why can I not skin whoosh.wav? I thought supporters had that ability.
I want to make life gauge which has my name like skin of rafis. how can i make it? and what software do i needed for?
Not 100%, but in regards to just menu-related elements (referring to Global section of Sounds in the Skinning article on the wiki), I've only ever seen the following in other skins and working:Philosofikal wrote:
Does anyone have a complete list of which menu audio elements are skinnable? And why can I not skin whoosh.wav? I thought supporters had that ability.
- welcome.wav
- seeya.wav
- menuhit.wav
- menuback.wav
- menuclick.wav
- applause.wav
The file you're looking to modify is scorebar-bg.png. This contains the background of the HP bar and you can put whatever you want on it, including your name. You can also modify scorebar-colour.png to have your name as well (if you want your name to fill with color instead of being static in the background for example).Kei1koh2 wrote:
I want to make life gauge which has my name like skin of rafis. how can i make it? and what software do i needed for?
Free tools to modify / create mage files include Paint.NET and GIMP. A more professional alternative is Photoshop, provided you obtain a copy in some way.
Kei1koh2 wrote:
I want to make life gauge which has my name like skin of rafis. how can i make it? and what software do i needed for?
Thank you for this tutorial, I now can make my own skin... heheheh
What's with the files with @2x at the end of the name? Some skin have it, and some doesn't. Can someone explain this to me? And what is the file name of the part in osu standard where it shows what key / mouse button the player is pressing, on the right side of the screen. Thanks!
that's it.. i'll try to create a skin (it took me a while to decide)
let's see if i can make something HALF decent haha
nice guide
all i have to do now is google pics from nichijou haha (i have a lot of material to choose from)
let's see if i can make something HALF decent haha
nice guide
all i have to do now is google pics from nichijou haha (i have a lot of material to choose from)
The "@2x" corresponds to a High-Definition element, being two times bigger than the Standard-Definition element (but still will appear on the same size of a SD element ingame, the difference the HD one is more clear). For example, the file you requested for the key/mouse button pressed is inputoverlay-key.png. The template skin's element has a resolution of 43x46 for the SD element, and a resolution of 86x92 for the HD element (aka the @2x element). Also, the background of the inputs is called inputoverlay-background.png. If you want to force HD elements, serach for this line in your config file (osu!.Your Computer Username.cfg):DannieKun wrote:
What's with the files with @2x at the end of the name? Some skin have it, and some doesn't. Can someone explain this to me? And what is the file name of the part in osu standard where it shows what key / mouse button the player is pressing, on the right side of the screen. Thanks!
HighResolution = 11 being to force them and 2 to not force them. Personally, when making a skin, I make the @2x element first, as it will be easier to scale it down to SD afterwards. The reverse isn't recommended.
Hope that answers!
Erm... I don't get it. Do you mean putting elements in a .osk? I think it's impossible. Just put all your elements into a .zip and change the extension (.zip) into .osk !Sp0of wrote:
kinda harrd to trnasfer my .zip files to my .osk dont know why its letting me sometimes. want to make my own skins... Have an LG desktop.
I'm having a problem with my skin. Everything is fine, but Taiko. When I hit the blue/red drum, it goes above the actual drum. How do you fix this?
Another thing, why is the RGB code of Mania colors 4? Isn't it supposed to be only 3? (This is from my skin.ini)
ColourLight1: 102,205,170,255
ColourLight2: 0,191,255,255
ColourLight3: 0,191,255,255
ColourLight4: 102,205,170,255
Colour1: 0,0,0,240
Colour2: 0,0,0,240
Colour3: 0,0,0,240
Colour4: 0,0,0,240
ColourHold: 255,230,0,255
And can someone explain to me what is the difference of ColourLight, Colour, and ColourHold? Thank you very much and have a nice day
ColourLight1: 102,205,170,255
ColourLight2: 0,191,255,255
ColourLight3: 0,191,255,255
ColourLight4: 102,205,170,255
Colour1: 0,0,0,240
Colour2: 0,0,0,240
Colour3: 0,0,0,240
Colour4: 0,0,0,240
ColourHold: 255,230,0,255
And can someone explain to me what is the difference of ColourLight, Colour, and ColourHold? Thank you very much and have a nice day
It's based from Key Count. If it's 4K, then 4 codes.
ColourLight recolors mania-stage-light.png, Colour recolors the mania stage background and ColourHold recolors the combo number during a Long Note hold.
ColourLight recolors mania-stage-light.png, Colour recolors the mania stage background and ColourHold recolors the combo number during a Long Note hold.
No, I mean not the keynotes, what I'm referring to is the RGB code, it's supposed to be 3 right? It should be something like 255,255,255 like the one on osu standard, but here on mania config, it's 102,205,170,255, like the ColourLight1OsuMe65 wrote:
It's based from Key Count. If it's 4K, then 4 codes.
ColourLight recolors mania-stage-light.png, Colour recolors the mania stage background and ColourHold recolors the combo number during a Long Note hold.
RGBA
A is for the alpha-channel, therefore transparency.DannieKun wrote:
Which part is the A?vahn10 wrote:
RGBA
Kinda curious...
What's the default dimension of cursors for the latest version? I saw that there's a lot using 60x60, but there's also some using 50x50, 40x40, etc.
Also some of them affect my aim (or it's just me. But in my case, lower dimension = heavier to move cursors around).
What's the default dimension of cursors for the latest version? I saw that there's a lot using 60x60, but there's also some using 50x50, 40x40, etc.
Also some of them affect my aim (or it's just me. But in my case, lower dimension = heavier to move cursors around).
Topic Starter
I don't think it really matters what dimension you will use to make cursor since you can adjust size in osu! options.
How long does skinning usually take. Want to become one.
DeletedUser_4041880
I'm making a skin but when I put the pause-overlay and fail-background in, it won't appear but when I add in other skin backgrounds, it works. Help?!? 
Make sure the size fits and the file format is .pngimaikiseta wrote:
I'm making a skin but when I put the pause-overlay and fail-background in, it won't appear but when I add in other skin backgrounds, it works. Help?!?
dws123 wrote:
Make sureimaikiseta wrote:
I'm making a skin but when I put the pause-overlay and fail-background in, it won't appear but when I add in other skin backgrounds, it works. Help?!?the size fits andthat the file format is .png
I would like skinning Taiko and I found myself that new template Skin unfortunately, not all skin elements Taiko available. It lacks the pink part, the red and blue semi-circles, white circle and the yellow spinner. Which file is it? 
What are these highlighted spinner files? The only one that seems to show up on screen in-game was the spinner circle file and the approach circle. Can someone explain this? Thanks!
It appears if you use version: 2 or later in the skin.ini and if you delete the spinner-background.png (Basically it's the Spinner from Skin Version 2)DannieKun wrote:
What are these highlighted spinner files? The only one that seems to show up on screen in-game was the spinner circle file and the approach circle. Can someone explain this? Thanks!
How do I use version 2 or later in skin.ini file? What should I configure?Rio- wrote:
It appears if you use version: 2 or later in the skin.ini and if you delete the spinner-background.png (Basically it's the Spinner from Skin Version 2)DannieKun wrote:
What are these highlighted spinner files? The only one that seems to show up on screen in-game was the spinner circle file and the approach circle. Can someone explain this? Thanks!
I'm working on my first skin and I was wondering about one thing...
in older Osi builds there was, when you clicked on Skins, a map playing where you could see that skin in action. But I don't find that in the new build only when I have an osu- zipped skin that I unpack with osu. Is there a way to enter that part without having to load a new skin? because it's kinda annoying to play a map and try to fail enough to get the section fail thing without failing entirely because you missed too many notes deliberately.
Or is there another way to 'watch' your skin in action to check things without having to play yourself over and over again? @-@
in older Osi builds there was, when you clicked on Skins, a map playing where you could see that skin in action. But I don't find that in the new build only when I have an osu- zipped skin that I unpack with osu. Is there a way to enter that part without having to load a new skin? because it's kinda annoying to play a map and try to fail enough to get the section fail thing without failing entirely because you missed too many notes deliberately.
Or is there another way to 'watch' your skin in action to check things without having to play yourself over and over again? @-@
How about watching replays of others or Autoplay?
About the old skin selection screen, it sure was easier to preview a skin but it kinda loses impact without cursor movement. With cursor movement you see how the hitcircles and followpoints feel like when playing and give a much better impression if something obscures gameplay. Time advances, so does technology or design.
About the old skin selection screen, it sure was easier to preview a skin but it kinda loses impact without cursor movement. With cursor movement you see how the hitcircles and followpoints feel like when playing and give a much better impression if something obscures gameplay. Time advances, so does technology or design.
well my main fokus is on when you screw up ^^, so Autoplay is out of question since it will always bee 100% the only way would be to make a replay where I screw up at one point and rewatch that... since my section failsound seems to be too quiet and I need to hear it in game to adjust it properly XD
what I do is I have a replay of myself playing a map I find easy with two breaks long enough to show section fail/pass, playing with no fail on, and I purposely fail the first section and pass the second. Then when testing a skin I can watch my replay on 2x to see how the section break/fail looks like in game. It can be even easier than the old preview screen since all you have to do to see new changes is press Ctrl+Shift+Alt+S (reloads the skin) when in song select before watching the replay again.yamane-kurou wrote:
well my main fokus is on when you screw up ^^, so Autoplay is out of question since it will always bee 100% the only way would be to make a replay where I screw up at one point and rewatch that... since my section failsound seems to be too quiet and I need to hear it in game to adjust it properly XD
put inDannieKun wrote:
How do I use version 2 or later in skin.ini file? What should I configure?
version: xunder the [General] section, where x is the skin version
Thanks ^^ feeling stupid for not thinking about that XD I'm always for the difficult and hard way it seems XDdorothy3242 wrote:
what I do is I have a replay of myself playing a map I find easy with two breaks long enough to show section fail/pass, playing with no fail on, and I purposely fail the first section and pass the second. Then when testing a skin I can watch my replay on 2x to see how the section break/fail looks like in game. It can be even easier than the old preview screen since all you have to do to see new changes is press Ctrl+Shift+Alt+S (reloads the skin) when in song select before watching the replay again.yamane-kurou wrote:
well my main fokus is on when you screw up ^^, so Autoplay is out of question since it will always bee 100% the only way would be to make a replay where I screw up at one point and rewatch that... since my section failsound seems to be too quiet and I need to hear it in game to adjust it properly XD
you mean something like this? (found in xK.ini, where x is # of keys)xelivous wrote:
when using columnspacing for mania, is there a way to fill the blank spaces which a specific color?
because the default full transparency looks really awkwardSPOILER
(ignore the outdated misaligned HP bar)
Colour1: 0,0,0,50
Colour2: 40,40,40,50
Colour3: 0,0,0,50
Colour4: 40,40,40,50
Colour5: 0,0,0,50
Colour6: 40,40,40,50
Colour7: 0,0,0,50