Guys , i need a little bit of help with the combobreak sound. I made a thread about it and they redirected me to this thread. So I recorded a 1 second sound which i want to use as a combobreak sound in my osu skin , but i can't seem to make it work. I named it combobreak.wav(the same name my last combobreak sound was which worked, i also tried combobreak.mp3 since i saw in some other threads they had their combobreak sounds with an mp3 format) but it wouldn't work , the file is also smaller than the one that i used before. It's 218 kb. Does anyone have any idea why it might not be working ?
forum
Skinning tutorial (+ skinning support)
posted
Total Posts
4,226
Well, it never works on small combo chains. Build up some larger combo chains like 30+ and after that it should be played. Otherwise you made it very quiet so it hardly gets noticed during play.
When i open the file it's as loud as my previous one , and i test it after breaking a 60-70 combo just in case.
It's 21+ combo. 30+ will do too. But if you missed the 21st circle, then it (combobreak.wav) won't triggerReddScorn wrote:
Well, it never works on small combo chains. Build up some larger combo chains like 30+ and after that it should be played. Otherwise you made it very quiet so it hardly gets noticed during play.
Well as i said i just did like 70+combo and then stopped doing anything , that should definatelly trigger it if it worked.
Well, that's odd... Can you post the audio material you'd used so that we can try our best to fix that?
There it is https://www.mediafire.com/?4r6alxaxvxb81l3 . I recorded it with mirillis action if it matters. Now that i listened to it again it isn't as loud as my previous one but it should be loud enough for me to hear it if it works.
can someone quickly provide a list of the file names for the version 2 spinner set?
deadbeat wrote:
can someone quickly provide a list of the file names for the version 2 spinner set?
- spinner-approachcircle
- spinner-bottom
- spinner-middle (spinner-middle2)
- spinner-top
- spinner-glow
- spinner-spin
- spinner-osu
- spinner-clear
- spinner-rpm
thanks <3
also what are the 3 cursor files. cursor, cursortrail and cursormiddle?
also what are the 3 cursor files. cursor, cursortrail and cursormiddle?
deadbeat wrote:
thanks <3
also what are the 3 cursor files. cursor, cursortrail and cursormiddle?
yup, like this
https://osu.ppy.sh/wiki/Skinning#Skin_Sets any issue with this new list so far
-mania is missing i know
-some elements such as followpoint are missing as well. dunno how to organize some things :<
-mania is missing i know
-some elements such as followpoint are missing as well. dunno how to organize some things :<
you missed seletion-mod-cinema :3deadbeat wrote:
https://osu.ppy.sh/wiki/Skinning#Skin_Sets any issue with this new list so far
-mania is missing i know
-some elements such as followpoint are missing as well. dunno how to organize some things :<
I dont know if you are going to put target mod as well?
I think I can help but... um :/
so I will check it if I have time
aha. thank you. i'll get those 2 added now :3
but yeah, feel free to edit that list as you see needed
but yeah, feel free to edit that list as you see needed
How can I edit the page o.o?
Or just find you :3?
Or just find you :3?
you need to log into to the wiki first, then you can edit, but i don't mind doing the edits :3
Hi. I've a problem with skinning. Anyone knows, how to remove or paint this?
I removed a normal catching effect by setting [Colours] to 0,0,0 in my skin.ini. Any ideas about bananas one? Is it possible to change?
Sorry about weak language.
I removed a normal catching effect by setting [Colours] to 0,0,0 in my skin.ini. Any ideas about bananas one? Is it possible to change?
Sorry about weak language.
Iirc, you can't
#1: dim to 100%
#2: change the combo colors in your skin.ini all to black (0,0,0)
#3: replace your fruit-bananas.png fruit-grapes.png fruit-orange.png fruit-pear.png and fruit-apple.png with a blanket transparent image
#4: recolor the overlays of the fruits
#5: the fruit-drop.png will be invisible, 'cause black colored fruit-drop on a black background
If you can life with it, go for it.
#2: change the combo colors in your skin.ini all to black (0,0,0)
#3: replace your fruit-bananas.png fruit-grapes.png fruit-orange.png fruit-pear.png and fruit-apple.png with a blanket transparent image
#4: recolor the overlays of the fruits
#5: the fruit-drop.png will be invisible, 'cause black colored fruit-drop on a black background
If you can life with it, go for it.
none of that will solve it. That fruit light can't be disabled and bananas are always yellow on any skin.Deimos wrote:
#1: dim to 100%
#2: change the combo colors in your skin.ini all to black (0,0,0)
#3: replace your fruit-bananas.png fruit-grapes.png fruit-orange.png fruit-pear.png and fruit-apple.png with a blanket transparent image
#4: recolor the overlays of the fruits
#5: the fruit-drop.png will be invisible, 'cause black colored fruit-drop on a black background
If you can life with it, go for it.
It's too quiet:auraX wrote:
There it is https://www.mediafire.com/?4r6alxaxvxb81l3 . I recorded it with mirillis action if it matters. Now that i listened to it again it isn't as loud as my previous one but it should be loud enough for me to hear it if it works.
Should normally be something like this:
Ok. Thank you all anyway. ;_;
i plan on having ALL skinnable files up there, so yes. hitsound files will be included at some pointYunzu wrote:
someone should add the sounds to the wiki too
How can i delete scorebar-ki , -kidanger, -kidanger2? when i put 1x1 px transparent there is still white glowing ball ;~~; help
DeletedUser_4041880
I see , thank you.ReddScorn wrote:
none of that will solve it. That fruit light can't be disabled and bananas are always yellow on any skin.Deimos wrote:
#1: dim to 100%
#2: change the combo colors in your skin.ini all to black (0,0,0)
#3: replace your fruit-bananas.png fruit-grapes.png fruit-orange.png fruit-pear.png and fruit-apple.png with a blanket transparent image
#4: recolor the overlays of the fruits
#5: the fruit-drop.png will be invisible, 'cause black colored fruit-drop on a black background
If you can life with it, go for it.It's too quiet:auraX wrote:
There it is https://www.mediafire.com/?4r6alxaxvxb81l3 . I recorded it with mirillis action if it matters. Now that i listened to it again it isn't as loud as my previous one but it should be loud enough for me to hear it if it works.
Should normally be something like this:
They are all named good, .png... dont know what's the problem ;cFrostei wrote:
Did you accidently save them as .jpg instead of .png or named them wrong?DDashiEE wrote:
How can i delete scorebar-ki , -kidanger, -kidanger2? when i put 1x1 px transparent there is still white glowing ball ;~~; help
-scorebar-ki
-scorebar-kidanger
-scorebar-kidanger2
you need to add a scorebar-colour.png to make them work or use scorebar-marker.png (the white ball)
Still dont work ;-; i even changed them to 3x3 transparent .png'sReddScorn wrote:
you need to add a scorebar-colour.png to make them work or use scorebar-marker.png (the white ball)
DeletedUser_4041880
Unzip this in your skin folder: Click hereDDashiEE wrote:
Still dont work ;-; i even changed them to 3x3 transparent .png's
If there's a white glowing ball on your scorebar, then there should be something in your skin folder called "scorebar-marker" or something like that, delete it and it should be gone.DDashiEE wrote:
How can i delete scorebar-ki , -kidanger, -kidanger2? when i put 1x1 px transparent there is still white glowing ball ;~~; help
@2up
@up
Worekd, i had scorebar-marker@x2
that's why i had this...
But thanks u anyway
@up
Worekd, i had scorebar-marker@x2
that's why i had this...
But thanks u anyway
Does anyone know how to enable thumbnails on a skin? I know there is already an option in the settings but some skins still don't have song thumbnails with that option enabled.
Does anyone know how to change this?
Does anyone know how to change this?
add version: 2.2 to your skin.ini under [general]
though 2.3 is the latest version, so i'd recommend using that instead
though 2.3 is the latest version, so i'd recommend using that instead
I was wondering if there is a way to change when the combo bursts images appear. To my knowledge the default times are at combo 30,60,100,150,200,250,300,350 etc. Is it possible to change when an image will appear to 30,60,90,120,150,180 for example? If not, is there a way to edit the base osu game files in order to change when they appear, and if so where would the file be located. Thanks.
-Flanktank
-Flanktank
Thanks so much!deadbeat wrote:
add version: 2.2 to your skin.ini under [general]
though 2.3 is the latest version, so i'd recommend using that instead
Quick question, how do I recreate this? (how do I "remove" the second circle of a slider?)
Sorry if it was already explained, couldn't find the answer.
Sorry if it was already explained, couldn't find the answer.
can't be done anymore from what i remember
After updating osu!, CtB's fruits' color is dependent on current combo color. Am I facing this problem, or otherwise?
I bet the behavior is changed. Instead of assorted colors, CTB's Fruits are colored the same way as STD's
Blank hitcircle.png and hitcircleoverlay.pngGaTu wrote:
Quick question, how do I recreate this? (how do I "remove" the second circle of a slider?)
Sorry if it was already explained, couldn't find the answer.
use hitnumber sprites as hitcircles and set hitcircleoverlap to 256
You can check my skin for more indepth pixelperfect details. It's in my signature
Thanks a lot! managed to do it with mine using yours as refence, loved it. Thx again.inverness wrote:
Blank hitcircle.png and hitcircleoverlay.pngGaTu wrote:
Quick question, how do I recreate this? (how do I "remove" the second circle of a slider?)
Sorry if it was already explained, couldn't find the answer.
use hitnumber sprites as hitcircles and set hitcircleoverlap to 256
You can check my skin for more indepth pixelperfect details. It's in my signature
Hi,
I made my own skin from pieces of several others and its playfield doesn't show when I press F2 (random song) but it does show up if I use another skin that wasn't made by myself. I tried to copy-paste those playfield that were showing up and put them in my skin folder but it still doesn't work.
It's not a really big deal, but I'm a bit annoyed by that...
Does anyone have a solution for me pl0x ?
I made my own skin from pieces of several others and its playfield doesn't show when I press F2 (random song) but it does show up if I use another skin that wasn't made by myself. I tried to copy-paste those playfield that were showing up and put them in my skin folder but it still doesn't work.
It's not a really big deal, but I'm a bit annoyed by that...
Does anyone have a solution for me pl0x ?
i like the cursor middle inthe default skin, but i can't make it work on my skins or the skins i use, any way i can make this happen?
DeletedUser_4041880
Copy and paste cursormiddle.png and cursormiddle@2x.png to the skin you're using. It should work.Haagentii wrote:
i like the cursor middle inthe default skin, but i can't make it work on my skins or the skins i use, any way i can make this happen?
You probably have a custom menu-background image in your skin, try to remove it and see if that would workOut Of Pancakes wrote:
Hi,
I made my own skin from pieces of several others and its playfield doesn't show when I press F2 (random song) but it does show up if I use another skin that wasn't made by myself. I tried to copy-paste those playfield that were showing up and put them in my skin folder but it still doesn't work.
It's not a really big deal, but I'm a bit annoyed by that...
Does anyone have a solution for me pl0x ?
It's HeightxWidth, but usually It should be Width xHeight.EliteDonuts wrote:
For the combo popups, it says 768x500, is it height or width first?
Can anyone tell me how to make the colour of hitcircle for single note and slider be different? :3
you know that he uses a transparent hitcircle and has a SliderTrackOverride that is not black?
I don't own thatReddScorn wrote:
you know that he uses a transparent hitcircle and has a SliderTrackOverride that is not black?
Change the colour, thats all =w=
I didnt notice the skin.ini ://
Thanks for your answer.inverness wrote:
You probably have a custom menu-background image in your skin, try to remove it and see if that would work
There is no menu background image in my skin :l
I am not sure if someone has asked but I have a question about default numbers and score numbers. Is there a simple way to create them? Is there a recommended font size maybe or typical creation for these? I seem to always make the numbers too small and they are unevenly spaced due to the different width of the shapes of the numbers.
is there any way i can remove the animation after hitting a circle?
No You can'tBroodich wrote:
is there any way i can remove the animation after hitting a circle?
You can use numbers from other skin as a reference (I usually do this if I want to make a skin-element, including the numbers). For spacing, You can add these lines in Your skin.ini :ShadOhhh wrote:
I am not sure if someone has asked but I have a question about default numbers and score numbers. Is there a simple way to create them? Is there a recommended font size maybe or typical creation for these? I seem to always make the numbers too small and they are unevenly spaced due to the different width of the shapes of the numbers.
[Fonts]*number* : the number You add for spacing, higher number = closer spacing
HitCirclePrefix: default
HitCircleOverlap: *number*
ScorePrefix: score
ScoreOverlap: *number*
Does anyone know if it is possible to prevent stretching of the button-middle element on the mod screen?
It's not possible to prevent stretching for button-middle. In fact, both button-left and button-right are scalable but not stretchable. These two elements are resizable by width, as button-middle can be used as 1 px which is resizable by osu! defined sizes.XilE wrote:
Does anyone know if it is possible to prevent stretching of the button-middle element on the mod screen?
Alright thanks.Garygoh884 wrote:
It's not possible to prevent stretching for button-middle. In fact, both button-left and button-right are scalable but not stretchable. These two elements are resizable by width, as button-middle can be used as 1 px which is resizable by osu! defined sizes.XilE wrote:
Does anyone know if it is possible to prevent stretching of the button-middle element on the mod screen?
You can try to use a wider button-middle to avoid long stretches.XilE wrote:
[Does anyone know if it is possible to prevent stretching of the button-middle element on the mod screen?
maby use this as cursor-smoke just kopie in all folders whit the cursor.png in it and make sure its called cursor-smokeRise wrote:
Heya, I've tried to skin a cursor for a skin for a long time, although I had no success, Thought I'd post it here for help
The cursor I'm heading for iswith cursor trail of
But with these colors :
Cursor - R = 51, G = 255, B = 153
and the cursor trail something a bit lighter such as : R = 102, G = 255, B = 178
Thanks by advance if you can help :>3
if u copie the cursor trail in every folder with the cursor in it and call the copies cursor-smoke it will make the smoke by pressing c red and it fits with the cursor
not working 
anytime i try to add follow points and that stuff like ranks it won't work could somebody help me?
anytime i try to add follow points and that stuff like ranks it won't work could somebody help me?I was just wondering what font size and if i should re-adjust the image size of my numbers so that they are not dis-positioned (some numbers higher than other numbers on the score line).Rio- wrote:
You can use numbers from other skin as a reference (I usually do this if I want to make a skin-element, including the numbers). For spacing, You can add these lines in Your skin.ini :ShadOhhh wrote:
I am not sure if someone has asked but I have a question about default numbers and score numbers. Is there a simple way to create them? Is there a recommended font size maybe or typical creation for these? I seem to always make the numbers too small and they are unevenly spaced due to the different width of the shapes of the numbers.[Fonts]*number* : the number You add for spacing, higher number = closer spacing
HitCirclePrefix: default
HitCircleOverlap: *number*
ScorePrefix: score
ScoreOverlap: *number*
Topic Starter
There is no typical recommended font size since fonts are different and they have different sizes. But I will tell you how I do numbers.ShadOhhh wrote:
I am not sure if someone has asked but I have a question about default numbers and score numbers. Is there a simple way to create them? Is there a recommended font size maybe or typical creation for these? I seem to always make the numbers too small and they are unevenly spaced due to the different width of the shapes of the numbers.
First most important is height of numbers for score try not do go over 45px (90px for HD), for default number try to keep them around 45-55px (90px-110px for HD) size but that's up to you.
Width doesn't really matters here since you can manipulate distance between numbers with skin.ini.
You need a good font that doesn't have numbers with different size, it will make your work much harder. I would like to recommend making your numbers large on new workspace and later, resize and copy them into selected numbers.
When you have your numbers ready, resize them to proper size (just do few tries to see with one will fit your desired height) and save them as correct numbers.
Now you would need some corrections.
First of we need to check if height is proper. Just open one of the numbers (0 for example) and put other numbers onto it, compare and see with one need corrections.
For width, reduce any empty space of canvas you have on them and lave 1-2 px of free space on both sides. As below :
Rest of width problems you can correct via skin.ini
So i want all my skin sounds to be the same, ive already changed each sound and kept the right names on everything, i have also turned on the skin sound sample setting but it does not work. I need help
Yes you can. When used with V2+ skins the trick to remove slider-ends also removes note fade-out.Rio- wrote:
No You can'tBroodich wrote:
is there any way i can remove the animation after hitting a circle?
Rio- wrote:
No You can'tBroodich wrote:
is there any way i can remove the animation after hitting a circle?
No, even in V2+, although the fadeout is quicker.Narrill wrote:
Yes you can. When used with V2+ skins the trick to remove slider-ends also removes note fade-out.
The trick is to use hitnumbers as hitcircles, which by look truncates slidertails and also removes the zoom transition (it will fade instead)No, even in V2+, although the fadeout is quicker.Narrill wrote:
Yes you can. When used with V2+ skins the trick to remove slider-ends also removes note fade-out.
Dang, I forgotinverness wrote:
The trick is to use hitnumbers as hitcircles, which by look truncates slidertails and also removes the zoom transition (it will fade instead)Narrill wrote:
Yes you can. When used with V2+ skins the trick to remove slider-ends also removes note fade-out.
Hi! I'm trying to customize a skin but my fail-backround and combo burst pictures aren't working
Make sure the file names are correct.SKRedPanda wrote:
Hi! I'm trying to customize a skin but my fail-backround and combo burst pictures aren't working
So, are the skin sounds not the same? Or are there no sounds?Nyanaro124 wrote:
So i want all my skin sounds to be the same, ive already changed each sound and kept the right names on everything, i have also turned on the skin sound sample setting but it does not work. I need help
Hello, can someone tell me how to remove that 1 from the selection-mode? 
DeletedUser_4041880
Thank you.Frostei wrote:
Replace the image named "mode-osu-small.png" with a transparent 1x1 png file.Camelius wrote:
Hello, can someone tell me how to remove that 1 from the selection-mode?
Hello! ^w^
I'm trying to modify my skin for Taiko, but there is something I don't know if it's possible to do.
I would like to know if it's possible to make 1 unique face for all the red notes and 1 unique face for all the blue notes.
Example all the red notes would have this face:
And all the blue notes would have this face:
Is it possible to do? And if so, how can I do that?
Thank you for answering my question ^w^
I'm trying to modify my skin for Taiko, but there is something I don't know if it's possible to do.
I would like to know if it's possible to make 1 unique face for all the red notes and 1 unique face for all the blue notes.
Example all the red notes would have this face:
And all the blue notes would have this face:
Is it possible to do? And if so, how can I do that?
Thank you for answering my question ^w^
nope. you can only differentiate for normal notes and big notes, not for red or blue.
Now I'm sad TwTReddScorn wrote:
nope. you can only differentiate for normal notes and big notes, not for red or blue.
In the ski.ini there's Color customization. It goes by RGB, so for example: 225,225,225 would be white, Etc.Chaoslitz wrote:
Can anyone tell me how to make the colour of hitcircle for single note and slider be different? :3
Is selection-selectoptions.png used anymore? It and -over are in the default skin template I have, but I don't see it anywhere?
The feature was removed. So this element isn't used anymore.dorothy3242 wrote:
Is selection-selectoptions.png used anymore? It and -over are in the default skin template I have, but I don't see it anywhere?
Can someone help me with my ranking panel not meeting with the upper panel? I've tried resizing it, but it keeps leaving a gap(where the cursor is). I have also tried it on other skins and the panels seem to meet (or overlap) for them. 
It's hopeless. Version: 2+ skins have that anchor.
Resize the ranking panel to 1366x768 and see if that works. If not, try resizing several pixels higher than 1366x768.a1l2d3r4e5d6 wrote:
Can someone help me with my ranking panel not meeting with the upper panel? I've tried resizing it, but it keeps leaving a gap(where the cursor is). I have also tried it on other skins and the panels seem to meet (or overlap) for them.
I've tried that. Unfortunately it only moves the panel down, blocking the statistics.inverness wrote:
Resize the ranking panel to 1366x768 and see if that works. If not, try resizing several pixels higher than 1366x768.
If that's the case, then it can't be helpedOsuMe65 wrote:
It's hopeless. Version: 2+ skins have that anchor.
Off to plan B if it can't be truly solved!
Or you can also try to switch to skin version 1.
No luck there either.inverness wrote:
Or you can also try to switch to skin version 1.
For now, I'll settle with a gradient blend until I find a solution. I'll welcome any other ideas you might have. Thank you for the help.
Can you delete unmodified files from a skin? Or does osu need them as reference?
if you delete them i believe osu will just sub in the defaults by itself, since a lot of skins don't have mania/taiko/ctb support but osu implements the default skins for those modes.TFguy wrote:
Can you delete unmodified files from a skin? Or does osu need them as reference?
Thanks, about to start making my first skin and I wasn't sure.ankou wrote:
if you delete them i believe osu will just sub in the defaults by itself, since a lot of skins don't have mania/taiko/ctb support but osu implements the default skins for those modes.
Can someone help me (again). I made a new play-warningarrow.png for my own skin but it appears red when I play for no apparent reason.
It's suppose to look like this
It's suppose to look like this
It seems to work. Thank you very much!dws123 wrote:
it's red by default for skins V2+ if im not mistaken
use skin V1 for it to be colourful
Is it permanently red on V2+ skins? If it is, then I'll just remove red on the image and let the game add the red for me (Though I don't think it will work).
v2 will have a red colour enforce for your play-warningarrowa1l2d3r4e5d6 wrote:
It seems to work. Thank you very much!dws123 wrote:
it's red by default for skins V2+ if im not mistaken
use skin V1 for it to be colourful
Is it permanently red on V2+ skins? If it is, then I'll just remove red on the image and let the game add the red for me (Though I don't think it will work).
you cant remove it :/
Tinting mechanics doesn't work like that. It tints pure white colour 100% and pure black colour 0% with all colours inbetween had it's own corresponding value.a1l2d3r4e5d6 wrote:
It seems to work. Thank you very much!dws123 wrote:
it's red by default for skins V2+ if im not mistaken
use skin V1 for it to be colourful
Is it permanently red on V2+ skins? If it is, then I'll just remove red on the image and let the game add the red for me (Though I don't think it will work).
or in another words, it will try to recolour everything to the specified colour (in this case, the element is tinted to red)
So you can't just completely remove all the red in the image expecting the game to add the red then?Chaoslitz wrote:
v2 will have a red colour enforce for your play-warningarrow
you cant remove it :/
Ah, that clears things up for me. Thank you very much.inverness wrote:
Tinting mechanics doesn't work like that. It tints pure white colour 100% and pure black colour 0% with all colours inbetween had it's own corresponding value.
or in another words, it will try to recolour everything to the specified colour (in this case, the element is tinted to red)
I'm completely new at this.
yup, it will still make your whole image be reda1l2d3r4e5d6 wrote:
So you can't just completely remove all the red in the image expecting the game to add the red then?Chaoslitz wrote:
v2 will have a red colour enforce for your play-warningarrow
you cant remove it :/