Source: The source file at offset 9900 has 1 note with Hitsound1.wav on volume of 32%.

36,192,9900,1,0,0:0:0:32:Hitsound1.wav

Target: The target file at offset 9900 has 3 notes with no hitsound.

36,192,9900,1,0,0:0:0:0:
182,192,9900,1,0,0:0:0:0:
475,192,9900,1,0,0:0:0:0:

Procedure:

1. Copy the source hit-objects into the "source" edit control and the target hit-objects into the "target" edit control.

2. Click on "Simplify" to remove redundant information from the source hit-objects. Feel free to edit this result.

3. Click on "Magicopy" such that the 3 notes on offset 9900 each receive approximately one-third volume (11%) of the original hitsound (32%) with the hitsound file name intact.

Source: The source file at offset 120833 has 2 notes different hitsounds on different volume.

36,192,120833,1,0,0:0:0:50:BassD.wav
182,192,120833,1,0,0:0:0:70:Hihat.wav

Target: The target file at offset 120833 has 3 notes with no hitsound at offset 120833 and an extra note at offset 120964.

36,192,120833,1,0,0:0:0:0:
182,192,120833,1,0,0:0:0:0:
475,192,120833,1,0,0:0:0:0:
475,192,120964,1,0,0:0:0:0:

Procedure:

1. Copy source hit-objects into "source" edit control.
2. Click on the "Simplify" button.
3. Copy target hit-objects into "target" edit control.
4. Click on the "Magicopy" button.

Results: The hitsound with higher volume (70%) is mapped on to two hit objects (35% each) while the hitsound with lower volume (50%) is carried to the remaining one.

Source: The source file has 3 notes at offset 500 with 3 different hitsounds on various volumes.

36,192,500,1,0,0:0:0:20:hitsound-meow.mp3
109,192,500,1,0,0:0:0:40:trololol.wav
414,192,500,1,0,0:0:0:70:Hitsound3.wav

Target: The target file has only 1 note at 500 offset and two other notes on other times.

36,192,500,1,0,0:0:0:0:
182,192,9900,1,0,0:0:0:0:
475,192,120000,1,0,0:0:0:0:

Procedure:

1. Copy source hit-objects into "source" edit control.
2. Click on the "Simplify" button.
3. Copy target hit-objects into "target" edit control.
4. Click on the "Magicopy" button.

Results: The hitsound with the highest volume (70%) is mapped with higher priority while the hitsound with lower volumes (40% and 20%) are reformatted as storyboard events. The two non-hitsound notes in the target file are copied as-is.

v0.2 - Minor Release - Bug Fix

1. Bug fix for file names with white spaces.
2. Keeping hitsounded target hit-objects intact after "Magicopy".
3. Corrected the syntax for outputting osu spinners (which are osu!mania sliders) in the target edit control.
4. Corrected "[Hit Objects]" to "[HitObjects]".

v0.1 - Major Release - Experimental Build

1. The "Magicopy" build.

📖 Conceptual Design

1. (LordRaika) - concept of the osu!mania Perfect Hitsound Tool and testing

💻 Implementation

1. (FrenzyLi) - C++ Design and implementation of "Magicopy" build (v0.1) on Windows

should it work for standard that only have 1 hitsound at one offset, we absolutely dont need to divide hitsound
we also CANNOT deal with missing hitsound since we CANT send default CLAP/WHISTLE/FINISH to storyboard

therefore, im thinking that you said you want to divide the right text control into 2 section? 70% for {hitobjects} and 30% for //SSS
i was just... RIGHT , THIS IS IT, this could be a very handful to finalize this last feature.



what do we do about it? i want to talk about the logical flowchart here :
#if the simplify button is pressed, add a pop out/prompt question "Osu!Standard / Osu!Mania" as choice.
osu!mania and it works the same as current one.
osu!standard AND it works the same but only different in //storyboard sample sound section

now the //SSS section will changed into //Missing Hitsound List
it contains the exact simplify code that cant find matching offset on the target difficulty.

^ that could work as reporter, to let mapper know the copy is done, and have some missing hitsound
NORMALLY in STD, missing hitsound won't be really bad, but for some perfectionist, they might want to check those missing and deal with it.





Allrite,finally lets start on the script T^T , here goes the long shit XD

first, some basic intro about the parameter:

NOW THE REAL PROBLEM is... the complex and challange will be on slider's hitsound >_<
here goes some experimental from me... :

Code :
8,48,1115,6,0,B|72:48|114:47|114:47|208:48,1,180.000001192093 ///"1" , its a normal slider, 1start 1end
8,128,1912,1,0,0:0:0:0: ///your average normal note
8,208,2072,2,0,L|80:208,6,45.0000002980232 ///It Repeats 6 times, and total of 7 that can be HS including the head/start of slider
8,296,3189,5,0,0:0:0:0: ///your average normal note
80,288,3349,1,0,0:0:0:0: ///your average normal note

L|80:208 is a slider, and with the node's axis.
I notice the code B|72:48|114:47|114:47|208:48 appear, only if the slider have multiple dot/node to form the slider.
while the |114:47|114:47| is basically 2node into 1same position to make the slider bends straight. (ok, this is not important at all)

OH WAIT! IT HAS nothing to do with hitsounding XD , lets skip this shyt...
now, still on those notes, lets start giving them a bomb...

and Code became like this :
uhm, basically copying from single note is SUPER easy, the simplify could looks like this.....



this.....




this...



this..


...



..



.



is.... the moment..... when i realize.....
osu for around 8 years, i never seen or heard osu!standard copier/hitsounder tool. orz

this is probably the most we can do from the data above :
1115 | 0 | Whistle | Auto,Auto,0,0 |
1912 | 0 | Whistle+Finish | Auto,Auto,0,0 |
2072 | 0 | Whistle | Auto,Auto,0,0 |
3189 | 0 | Finish+Clap | Auto,Auto,0,0 |
3349 | 0 | Finish | Auto,Auto,0,0 |

just leave the volume 0, it will use the timing's setting volume.
as for the bold one... "OK GOOD QUESTION...., i know the next question will be...
where is the hitsound for the tail? for 2nd repeat slider, 3rd repeat slider and so on..."

the answer is... we can have the value of what hitsound it is, its easy... but we can not ever get the offset value BEFORE...
we knew what makes the offset of the tail, 2nd repeat slider and so on....




all because of the bold value, i assume that is "the length" of the slider, yes it is, and its probably divide with bpm, and snap or something like that.
so in editor they got their exact offset. well... i cant figure how those 2 bold value could give us 1753, and 2232, 2391, 2551, 2710, 2870, 3029

T^T im.... ugh.....




umm umm, everything is clear and the logic should be easy to make this final.... >w<
just one more thing, oh right, about the SampleSet and Additions

152,184,9999,1,12,2:3:0:0: ///has the setting of SampleSet = Soft, and Additions = Drum
its a setting for hitsound set ignoring timing's setting > can be set in editor from this tool...


according to above script, the single note in Standard, will give hitsound of soft-hitnormal + drum-hitfinish + drum-hitclap
errr its okay if you dont really get this(not really important), all we need is to store the value and copied it correctly >w<



for finalize of the simplify list... it could looks like this
{Offset|Volume|SampleSet|Additions|Hitsound|Custom#}                                                <<< you might need to add this new header XD
9999 | 0 | Soft | Drum | Finish+Clap                                                                                   <<< as usual, volume 0 means "Auto"
32768 | 44 | Nrml | Auto | Clap                                                                                           <<< sometimes, its not 0, so it should be carry over
65536 | 0 | Auto | Nrml | Whistle | CustomSet:"92"
1024 | 80 | ---- | ---- | LR4_BassDropXR.wav

a little bit more complex now but still more user friendly to list down all the hitsound XD
#for Custom, no need to add it to list IF the value is 0, since its 'RARELY' used, you could almost never find any mapper use this setting
for hitsounding their map beside DjPop's map and my Hitsound Guide map(its not even for rank XD)
but yeah, if the "Simplify" found the value is not 0, might want to add it to copy list...

for more additional NB,.. those setting is exist to deny the existences of timing setting haha
the extra |SampleSet|Additions|Custom| < yea this little thingy.
some mapper use this since they dont want to add new timing every single time especially for specific note.



More to Note that..... SAMPLE IMPORT's hitsound is the priority... means if you found audio file name on the last line...
you can ignore the rest... and only take the volume and audio file name like the above
1024 | 80 | ---- | ---- | LR4_BassDropXR.wav
(because even if you copy all the SampleSet|additions|Custom for it, its not going to affects sample import's hitsound at all)
in short... do as you please >w<




FINAL note...(finally).... for the IF filtering, all assuming having same offset, source and target.

1. if source have 1 clap 0 volume, target have 2 note : "only 1 clap is given to 1 note, 1 missing"
   (NOT really neccessary to list/report this missing unless if we got feedback, some mapper need this in the future)
   and report missing only for default hitsound, since sample import will never missing, it goes to //SSS section
2. if source have 1 clap and volume >= 10, target have 2 note or more : "then it should start to divide vlm and give both clap"
   9% volume and less, its best to not divide it and not giving other note the clap, just 1 clap of 9% volume,
   and the LOWEST divide volume possibility should be 5%, should the source have 20%volume, and copy to 6 note,
   each note will have 5% volume (total 30%vol, its okay... really... mania rarely have 6 note all the times anyway)
3. if source have 1 clap(2) and 1 clap+whistle(10) , target only have 1 note : "only clap+whistle is copied"
   and this time , the clap(2) will be on the report list.
4. if source have 1 clap(2) and 1 clap+whistle(10) , target have 1 clap(2) and 1 note : "the 1 note will get clap+whistle"
5. if source have SampleSet,additions,customset setting, overwrite the target's setting regardless of note amount.
   volume still depend on note amount.
6. if Simplify found audio file name, while its also found clap and other setting : "it will only takes Audio name and volume"
   ignoring sampleset,additions,customset.
7. Magicopy NEVER check for target's Sampleset,additions,and customset, :
   "only check for this >note amount(by same offset),audio name(used by sampleimport),W-E-R,and volume"
   then it writes from source to target. ok hope i didnt missed any scenario

at last, i can say im done...
sry for the long shyt >_<
take your time, this is only for extra feature... as im already very satisfy with v0.2
v0.2 really works perfect, thats only for SampleImport,yeah...

if this works for default, idk if we should promote it into v0.9 since its only doesnt work for slider, but perfect for any other things.