[mapping相關]如何處理物件穿過多條紅線的unsnap

spboxer3

Global Moderator

3,616 posts

Joined November 2009

Topic Starter

spboxer3 2013-11-01T18:31:32+00:00

Spinner

當轉盤中間或結尾出現紅線時所形成的unsnap
解決辦法: 開啟osu檔案找到物件的位置直接對結尾時間做修改
以此為例: KOTOKO - Change my Style ~Anata Gonomi no Watashi ni~ (Short Ver.) [Easy]
1. 物件位置: 01:35:659 (1) -
```
256,192,95659,12,4,97178
```
  1. 95659是物件起點時間(ms), 97178是物件終點時間(ms)
  2. 於是只需要改97178改到正確位置97192即可

Slider

當slider中間或結尾出現紅線所形成的unsnap
解決辦法: 開啟osu檔案找到物件的位置計算出時間差距做修改
以此為例: PESS vs t.A.T.u. - All The Things She Said (DnB Remix) [Stressboxer]
1. 物件位置: 02:07:864 (5) -
```
296,188,127864,2,0,P|272:256|293:323,1,138,4|0,0:0|0:0,0:0:0:0:
```
  1. 127864(ms)是物件起始位置 138則是現在diff的SV*物件的拍數 現在是3/4拍所以是184*0.75=138
  2. 接著找正常的3/4拍所經過的時間: 128114 - 127864 (結束時間 - 開始時間) = 250
  3. 再來找正常的3/4拍調整後的時間: 128102 - 127864 (正確的結束時間 - 開始時間) = 238
  4. 238/250*138=131.376這正確的位置就在131.3~131.4之間了 (這時候需要把兩個數值都試過一次使用AIBAT檢查)
  5. 最後把138替代掉就完成了

Ayiko - Tashikametai Nukumori (feat. Shoko)

Colin Hou

osu! Alumni

4,456 posts

Joined November 2009

Colin Hou 2013-11-02T07:05:10+00:00

Echo wrote:
360,64,27636,6,2,B|160:64,1,200,0|4
x, y, time, object type, global hitsound, curve type|controlpoints, repeats, length, individual hitsounds
Object type: 6 = new combo slider, 2 = not new combo slider
If there are no individual hitsounds, then slider ends become same as global hitsound.
Hitsounds: 0 = none, 2 = whistle, 4 = finish, 8 = clap (can be added together)

So in this case, the slider is:
2 control points at (360, 64) and (160, 64)
bezier curve
starts at time 27636
new combo
slider track is whistle
slider is traversed once (ie. no repeats)
the length of the slider is 200 pixels
the starting hit circle has no hitsound; the final hit circle is a finish
Hope that helps.

Echo

这是两年前问Echo的答复不过也大致上差不多那个138还是理解成物理长度好了