cant find the tuiopad on my iphone for sum reason
forum
Using iOS or Android device as tablet style controller
posted
Total Posts
205
Bonnie1356 wrote:
cant find the tuiopad on my iphone for sum reason
It could very well have been removed from the app store by Apple. I do know the app is still available for android, but I cannot confirm for Iphone users because I don't own an Iphone.
I got it all working but the sensitivity is too low? and the area doesnt even reach to the edge of my com
ok so i was struggling then i changed the port from 3333 to 333 pressed start went to my pc did the same with the port then pressed the button to start and it connected
shake your devicehydrox7 wrote:
how do i get tosetting on andriod
???
Topic Starter
Hey all! OP here. Pinging this thread again as I still get activity on that video every once in a while to say I confirmed today that the Android app will work with TouchProxy on the latest version of Windows 10. To get to the settings page of the Android app, just shake your phone. I can't figure out if the iOS app is available; it shows up in a google search but it hasn't been updated in so long that it may only be available for older devices. If anyone gives it a shot, let me know. Happy tapping!
Woohoo! Stumbled upon this thread right now, and there you are, seven years later, leaving a comment on this 
Really liked and used the guide back in the day. It helped a lot. Thank you for making it!
Really liked and used the guide back in the day. It helped a lot. Thank you for making it!
It only works the first few seconds then stops
it works fine for me but the center of my ipad is in the top left corner for my laptop
how do i put my ip address on the desktop app?? i see where it lets you put it on the ios app but not on the desktop
does anybody know how to change the sensitivity? It's slow and I'm not used to it.
HOW, IT DOSENT WORK, I PUT IM MY PORT AND IP TUIO AND IT DOESENT WORK
How do I get it working? mine can't even connect to my computer (using ipad)
I’m having problems of centring of the screen, any help
+1Marnige wrote:
I got it all working but the sensitivity is too low? and the area doesnt even reach to the edge of my com
Originally tried to make a hacky version using python and sending messages via sockets but it ended up being too choppy but this seems to be a more elegant solution, except for the lack of settings in TouchProxy
wow
I tried many times with my tablet but the client does not respond
stevo4328
the reason ecotuiodrivers dont work is because u prob have ur firewall turned offDeadlySin9 wrote:
This post has been updated as of Jan. 20, 2021! I confirmed that TouchProxy and TUIOdroid will still work. The EcoTUIODriver link has been updated to a newer version, but I couldn't get it to work outside of the preview window.
If anyone can confirm whether or not the iOS app link below still works, let me know! The app hasn't been updated in a while but it still shows up in searches, there's a chance it only works on older devices.
If you have problems, try running the desktop server as administrator!
So I've been using this while waiting to be able to get a real tablet. This allows you to use any iOS or Android device that can install the app as an absolute tablet style controller.
Video:
Requirements:
1) PC running Windows 7 or higher.
2) Either TouchProxy (Windows 8 and up, works on latest W10) or EcoTUIODriver (works on Win7, but I couldn't get it working on windows 8)
Mac: Try Tongseng, I've not tested it as I don't have any Macs.
3) Apps -Android: tuioDroid
iOS: TuioPad
4) OPTIONAL - A stylus. You can just use your fingers but that just seems weird to me. I'm using a Targa Slim stylus i got at Best Buy.
First off, install the Desktop and Mobile app that works with what you have (good luck getting tuiopad on Android otherwise).
Open up the desktop app to make sure it configures, and check the port it is set to.
NOTE: It may help to run as administrator. I got this working on Windows 10, but not until I ran it as admin.
Next, on your mobile device open the TUIO app and enter your computer's local IP address and the port.
Then just turn on the service from the desktop app and you have touch control! It registers as if you were touching on a Tablet PC, so it's like continuously holding down the mouse.
Remember to set osu! to use a mouse sensitivity of 1 or the cursor will spaz endlessly.
NOTES: For TUIODroid, you have to enter the menu to change the IP. This can be done by hitting the menu button if your phone is old enough to have one, or by shaking the phone if you have a modern Android phone without a menu button.
Pictures:
Since I haven't seen it posted here and others might have the same issue...
I experienced a lot of seemingly random input stutter und cursor jitter using TUIODroid and Touchproxy, leading to annoying misses and frustration. Replacing Touchproxy with TouchInjector (https://github.com/michaelosthege/TouchInjector/releases) fixed both issues for me. In general, TouchInjector seems to work a lot better than TouchProxy, might be worth recommending it in the guide itself.
I experienced a lot of seemingly random input stutter und cursor jitter using TUIODroid and Touchproxy, leading to annoying misses and frustration. Replacing Touchproxy with TouchInjector (https://github.com/michaelosthege/TouchInjector/releases) fixed both issues for me. In general, TouchInjector seems to work a lot better than TouchProxy, might be worth recommending it in the guide itself.
Hey, thanks for your effort. I guess everything works fine, but the server button wont turn on. theres an error code: 10048.
how can I fix this?
thanky you ^^
how can I fix this?
thanky you ^^
Can u tell me how did u connect it together, please?HobbitTitan wrote:
Im using a Ipad and it seems i'm doing everything correctly, but it just wont workhelp please
hey! can you do pls a video guide how to connect an ipad and a windows pc, cause i tried and it is not working 
no