as I said people don't mod because it's already fine.
not a fan of all the stacks
slider tick 0.5? what are you doing? slider tick 2 or 1.
You have no claps, which if you replace the clap with a tinny snare or something and map on the backbeat, it will sound fine. You can also use soft slider whistle. As I described below. Whistles are pretty "meh" but I like the soft whistle a lot to add emphasis to certain notes.
There's also opportunities for multiple cymbal crash finish sounds in the map, which you may want to exploit.
Maybe I'm just slow at AR9 and this low volume in general (I use hitsounds to tell when I'm early/late, which is impossible on this low volume), but I'm ~20 ms late. Try +10.
00:21:333 (8) - this note here, which repeats pretty much the entire song, could be mapped by a soft slider whistle (or a normal slider whistle actually sounded fine).
00:37:848 (1,2,3,4) - finishes if you use customs.
01:13:937 (2,3) - spacing
01:19:442 (4,5,6,7) -
http://puu.sh/551L I know you're a fan of stacks, and I'm not, but I have a hard time reading this, since the approach circles are almost equally spaced when you look up and right (because you can't tell from any other direction). I use approach circles a lot more than I realize when I'm playing.
01:55:174 (4) - spacing
01:56:780 (11) - stack it right or not at all
01:57:239 (1) - 1/3 snap
01:58:462 (5) - make symmetrical?
02:02:591 (3) - stack
02:17:807 (3) - questionable
02:19:642 - could add
02:22:700 (4) - questionable
02:23:312 - could add
I'm done with this section, there's more to fix if you want to follow a part, you just have to listen to the rhythm on 25%.
02:44:186 (25) - make the repeat a little more visible?
02:53:948 (3,4,5) - I know there's
something under that slider, I just always forget it's 3 things.
[storyboard]
argh.
You are essentially using the background in this storyboard, so go ahead and
use it. Rather than using a black image to cover it up, just fade it out. That gets rid of 2.0 storyboard load--the background
and the black image to cover it up with.
If you still need black.png after this, just make it 640x480 as well and make sure you center it at 320x240 (using any other orientation gives it improper coverage). Alternatively you can colorize glow.png to be black, or just fade into the black background.
You can colorize throne.bg to be red instead of doing it yourself by using:
_C,0,blah,,255,0,0
which will take out the green and blue channels, leaving only a red channel. This also ensures the image is
identical to the previous. Right now you have a shadow effect going on or something.
http://puu.sh/553PI have no idea when arc got that rack either.