that already helps alot.. OsuMe65 wrote:
Every skin with that type of spinner gets its background dimmed for good.
tested my own spinner with the same type as yours
Oh, that's a shame. Too bad that it'll not going to work for the time being.MLGnom wrote:
Sadly it's that since "new" skin were introduced. Old style bg's never got fixed, even after many reports. :/
TouchFluffyTail wrote:
All the spinner elements are on screen at once during a spinner. spinner-top is overlaid onto spinner-bottom, and when start spinning both these elements spin at different rates to give the crazier swirl effect. spinner-middle get additive red color as you spin acting as the spinner metre. spinner-glow gets additive blue color as you spin acting as a secondary spin metre, and then flashes whenever you get a spinner bonus tic.
This is correct. As another side note on spinners - spinner-middle2 is basically a spinner-top-top as it's overlaid onto spinner-top and it also spins, giving you three rotating layers to work with. I can't recall if spinner-middle2 spins at the same rate as spinner-top though.OsuMe65 wrote:
this is the element order of the new spinner (if i got it right)
that depends on how you see your hitbursts during play.Shojhi wrote:
I also finished the hitbursts today, the hit300-images are 102x211 large (height x width). They're fitting nicely and they shouldn't be larger than the hitburts that the template provides, but I would like to make sure, are they too large for regular play?
my bad, my badGarygoh884 wrote:
Mistake, during gameplay, the approach circle lies below spinner-middle2, using my own older skin elements I made.
Oh, I see.OsuMe65 wrote:
that depends on how you see your hitbursts during play.
well, as for the size... it should work well since it is smaller than the default's 256x256
1366x768 is a 16:9 resolution, if you are using a 16:10 5:4 or 4:3 resolution the background image will be fit to the resolution vertically then cropped on the sides to fit the ratio.3GidiZ wrote:
Hello, I'm in the middle of skin creation and am now working on menu-background and a question popped as I don't know how to solve it since i'm not a supporter yet. Picture size is 1366x768. I read that picture will be cut from left side at lower width resolutions. Will bottom of the picture will also be cut or will it be shrunk first and then cut?
Got it. Thanks for the quick answer! ^^TouchFluffyTail wrote:
1366x768 is a 16:9 resolution, if you are using a 16:10 5:4 or 4:3 resolution the background image will be fit to the resolution vertically then cropped on the sides to fit the ratio.3GidiZ wrote:
Hello, I'm in the middle of skin creation and am now working on menu-background and a question popped as I don't know how to solve it since i'm not a supporter yet. Picture size is 1366x768. I read that picture will be cut from left side at lower width resolutions. Will bottom of the picture will also be cut or will it be shrunk first and then cut?
Try also different maps, sometimes maps have forced sounds.Tenza wrote:
How do you change the hitsounds on a skin? The skin I'm using does not have any hitsound files like normal-hitclap or so forth. I downloaded a hitsound I liked and put it in but it doesn't make any sound when I play in osu? Yes I reloaded the client and also have the option for using the skins hitsounds enabled.
I just tested to make sure, and you can't animate lighting. It's possible to animate the judgement hits themselves though.Tsuchimikado wrote:
Is it possible to do animated lighting? or to have two lighting png's go off at the same time?
I'm not sure what the actual hitbox on circles is, I've been meaning to ask peppy/test this out myself, but in the meantime the actual hitboxes on cursors and circles are defined by the game, not the graphic. That would be silly.decoy11 wrote:
I want to make a accurate PRO skin for myself and i can't find any info on hitboxes for circles and cursors. Can anyone tell me what they are.
I see a lot of different pixel sizes and shapes for cursors too. Is the hitbox the cursor.png file or is it a separate entity?
I also see people making squares instead of circles for skins. Do the corners of those squares act also as part of the hitbox?
Those are all actual skin elements, but they are not skinnable. They're all part of the base menu system which is entirely locked out from being skinned.OsuMe65 wrote:
@vahn10: skinning the cookie (logo) is strictly prohibited, you know
------------------------------------
anyway, if those are supporter only skinnables, let's wait for a supporter's response for further information/confirmation....
you can see it when you finished watching failed replayOsuMe65 wrote:
@vahn10: skinning the cookie (logo) is strictly prohibited, you know
------------------------------------
anyway, if those are supporter only skinnables, let's wait for a supporter's response for further information/confirmation....
please use the test build and skin one of themTouchFluffyTail wrote:
Those are all actual skin elements, but they are not skinnable. They're all part of the base menu system which is entirely locked out from being skinned.
peppy locked out all the menu skin elements from the main client for good back when the default skin was updated. These things work in the test client but... who cares about skinning menu items only for the test client. Don't bother using these elements.vahn10 wrote:
please use the test build and skin one of them
off topic:TouchFluffyTail wrote:
peppy locked out all the menu skin elements from the main client for good back when the default skin was updated. These things work in the test client but... who cares about skinning menu items only for the test client. Don't bother using these elements.vahn10 wrote:
please use the test build and skin one of them
)
There isn't. The only slider adjustments you can make are border color, track color override, and the track style.decoy11 wrote:
Is there a way to change the thickness of the slider overlays?
I want to try and match it to my hitcircleoverlay.png thickness
"playfield.png" doesn't work and I think that function wasn't yet removed.TouchFluffyTail wrote:
Didn't it use your playfield.png? Atleast that's how I remember it doing it. I think that functionality got removed completely when the ranking screen got updated to show the song diff BG on the background.
You can always just override that by making a 1366x768 (2732x1536@2x) ranking-panel.png and covering the entire screenspace.
^TouchFluffyTail wrote:
You can always just override that by making a 1366x768 (2732x1536@2x) ranking-panel.png and covering the entire screenspace.
ranking-panel.pngNathanael wrote:
What was the filename for the ranking screen background? I forgot it.. =.=
that is... PizzicatoNathanael wrote:
I'm not sure if its before or after but I think that user uses the skin before the update.
I always see that the user always has a Black Rock Shooter background on his ranking results. [ Not by replacing the real background ]
take note, old skin behavior covers up the entire screen. it's contrary is the new skin behaviorTouchFluffyTail wrote:
You can always just override that by making a 1366x768 (2732x1536@2x) ranking-panel.png and covering the entire screenspace.
playfield.png still has use. it usually appears on maps without BGs, if you can still remember it...Nathanael wrote:
"playfield.png" doesn't work and I think that function wasn't yet removed.
The arrow is still blue even after changing skin behaviours.MLGnom wrote:
You can always use "old skin behaviour"...
Ah, so it's now forced (or it was for a longer time?).Ideolo wrote:
The arrow is still blue even after changing skin behaviours.MLGnom wrote:
You can always use "old skin behaviour"...
Like I said it gives black screen. So these screenshots were made before update. Now you can only edit ranking-panel.png to cover ranking screen.MLGnom wrote:
Right now I'm at work so I'm unable to test if playfield will work when beatmap background is be deleted. (Probably will be only black screen, but I'm not sure about that.)
You can just create a textfile with notepad for example and change the extension.YuZuKi Kenny wrote:
I have a question.
How to make an *.ini file of my skin?
My English is poor. ;(
For transparency you alter the alpha value. In an RGBA code it will be the fourth number. Quick example; 255,255,255,255 is solid white, 255,255,255,0 is totally invisible. Note that not all RGB parameters used by the game accept an alpha value.Zharaff wrote:
Then , what RGB codes if i want transparent colour ?
Nah it was already for some time. Hell, I remember now that it was add together with new default skin.Ideolo wrote:
I believe the color changing started about 2-3 days ago.
Oh.. forgot it that he was.. =.=OsuMe65 wrote:
that is... Pizzicato
he uses an overridden raking-panel, like what TouchFluffyTail said
thanks sir , i very apreciate for your attentionTouchFluffyTail wrote:
For transparency you alter the alpha value. In an RGBA code it will be the fourth number. Quick example; 255,255,255,255 is solid white, 255,255,255,0 is totally invisible. Note that not all RGB parameters used by the game accept an alpha value.Zharaff wrote:
Then , what RGB codes if i want transparent colour ?
Also It helps to specify what part your editing.
(out of topic) sounds like your shader effects turned on, try turning it off[ Zan ] wrote:
How do I make it so that when my score bar gets low the screen doesn't start turning red?
This is actually controlled by the 'Shader effects' tic box in the graphics options, if you turn it off your screen won't have any effects applied like the health drain or kiai start flash.[ Zan ] wrote:
How do I make it so that when my score bar gets low the screen doesn't start turning red?
Yes, as long as you correctly warn it as nsfw or something.Rei Hakurei wrote:
well, just a safe-case question..
R-15 skin are allowed to be posted here ?
As long as you keep it as off-site source (especially screenshots) and of course add warning it should be fine.osu! rules wrote:
As this forum is visited by minors, no 18+ subject matter is allowed. As such, you are not to embed content that is not safe for work. All mature subject matter must be linked from an off-site source, must be clearly identified as "NSFW" (Not Safe For Work), and must have some value in being posted. Do not link inappropriate content for the sake of linking inappropriate content.
i'll need to check up on it. hopefully it's nothing overly bad though ._.MLGnom wrote:
Yes, as long as you correctly warn it as nsfw or something.Rei Hakurei wrote:
well, just a safe-case question..
R-15 skin are allowed to be posted here ?
If I'm correct you can even post 18+ things but... let me find that thing in rules...
Ah there it is :As long as you keep it as off-site source (especially screenshots) and of course add warning it should be fine.osu! rules wrote:
As this forum is visited by minors, no 18+ subject matter is allowed. As such, you are not to embed content that is not safe for work. All mature subject matter must be linked from an off-site source, must be clearly identified as "NSFW" (Not Safe For Work), and must have some value in being posted. Do not link inappropriate content for the sake of linking inappropriate content.
It's size is : 193x768 pixelsGarygoh884 wrote:
There's another skinning element called masking-border.png. These are used to cover the sides for 4:3 resolution storyboards. On the left it's original, but on the right the element is flipped horizontally.
So my plan is: if we have two different sprite names masking-border-left.png and masking-border-right.png, it uses two different border images separately without flipping any of these sprites. Agree?
Dimensions:Nathanael wrote:
Oh and by the way. MLGnom, you haven't included selection-mod-random.png which is only for mania.
Don't test elements in osu!test. They are working a little differently and as you said it doesn't work in public. You only misleading other. :<Nathanael wrote:
At osu!test, there is a skinnable element named ranking-background-overlay.png
I don't think they do, it's just slider style 3 combined with that slider color shows more through your circle than the background of the non slider circle.Loli Cjj wrote:
Someone can explain why circle at normal and slider has a kinda different opacity?
Or was it me?
Your are probably on the beat of the circle in editor and the slider starts at a later time. Notes will gradually fade out when they get further away from the point you are in the song for editor.Loli Cjj wrote:
Someone can explain why circle at normal and slider has a kinda different opacity?
Or was it me?
Jackyyy wrote:
If you want to remove it completely, replace the 'ranking-graph.png' with an empty/full transparent image.
or
If they box is part of the 'ranking-panel.png', use some sort of software that supports transparency (Gimp, Photoshop etc.) and just erase it.
vahn10 wrote:
some important advice for HD Skinners:
1. Double the Resolution of standard elements
2. Create That Element Using Bigger Images
3. Save that Element to (Filename)@2x.png
4. After you save that element, divide the HD resolution eg. 1332/2=666
5. Save it as (Filename).png
6. You have SD & HD Element Skinned
It would be good to include that at the first post so other skinners can save time on making their skins..OsuMe65 wrote:
vahn10 wrote:
some important advice for HD Skinners:
1. Double the Resolution of standard elements
2. Create That Element Using Bigger Images
3. Save that Element to (Filename)@2x.png
4. After you save that element, divide the HD resolution eg. 1332/2=666
5. Save it as (Filename).png
6. You have SD & HD Element Skinned
peppy (or someone else) gave that advice before you did.
fyi the slider is on play so I believe it should be on 100%Jackyyy wrote:
Your are probably on the beat of the circle in editor and the slider starts at a later time. Notes will gradually fade out when they get further away from the point you are in the song for editor.Loli Cjj wrote:
Someone can explain why circle at normal and slider has a kinda different opacity?
Or was it me?
Don't know the name of this 'point in song' cause I can't map ;(
Hopefully you understood my bad explanation.
