wow thank you for the fast answervahn10 wrote:
Yes and it's filename is taiko-glow.png

I only use photoshop so I can only advise on that, but to do that easily you can create a mask on the layer (button on the bottom bar of the layers window), then select the mask and use the gradient tool with it set to reflected gradient with 'reverse' checked, then you just set the gradient horizontally and you should have it.[ Zan ] wrote:
I'm trying to get the same type of blur as this:
on this:
Can someone explain how?
I don't know if you can answer this since it's gimp but I assume it's similar to PS:TouchFluffyTail wrote:
I only use photoshop so I can only advise on that, but to do that easily you can create a mask on the layer (button on the bottom bar of the layers window), then select the mask and use the gradient tool with it set to reflected gradient with 'reverse' checked, then you just set the gradient horizontally and you should have it.[ Zan ] wrote:
I'm trying to get the same type of blur as this:
on this:
Can someone explain how?
Just a quick explanation so feel free to ask if I need to elaborate on anything.
You can change it in the skin.ini filemrgkevin wrote:
I can't figure out how to change my slider colors
Halp
Chaoslitz wrote:
You can change it in the skin.ini filemrgkevin wrote:
I can't figure out how to change my slider colors
Halp
By adding SliderTrackOverride: 'The colour you want'
SliderTrackOverride: R,G,B
Can anyone explain these steps with pictureTouchFluffyTail wrote:
I only use photoshop so I can only advise on that, but to do that easily you can create a mask on the layer (button on the bottom bar of the layers window), then select the mask and use the gradient tool with it set to reflected gradient with 'reverse' checked, then you just set the gradient horizontally and you should have it.[ Zan ] wrote:
I'm trying to get the same type of blur as this:
on this:
Can someone explain how?
Just a quick explanation so feel free to ask if I need to elaborate on anything.
Chaoslitz wrote:
Can anyone explain these steps with picture![]()
(Bad at English
yay thats awesomeTouchFluffyTail wrote:
Chaoslitz wrote:
Can anyone explain these steps with picture![]()
(Bad at English
HitCircleOverlapin the [Fonts] section of the skin.ini. The exact value you have to use it dependent on your element size so you're going to have to trial and error the exact value.
I sort of know about the HitCircleOverlap value, and how it affects the hitcircles. However, the best I can come up with is this:TouchFluffyTail wrote:
You have to useHitCircleOverlapin the [Fonts] section of the skin.ini. The exact value you have to use it dependent on your element size so you're going to have to trial and error the exact value.
Add thisAsdran wrote:
hi,
Can you help me how to make a little picture in my skin too? :O
http://puu.sh/9k3wF/e93880dcdd.jpg
like this:
http://puu.sh/9k3z9/ed2a40f6bf.jpg
Version: 2.2or
Version: latestto your skin.ini in [General] section.
Thank you very much *.*[cocoa] wrote:
Add thisAsdran wrote:
hi,
Can you help me how to make a little picture in my skin too? :O
http://puu.sh/9k3wF/e93880dcdd.jpg
like this:
http://puu.sh/9k3z9/ed2a40f6bf.jpgVersion: 2.2orVersion: latestto your skin.ini in [General] section.
Request it in Feature Request subforum then.Asdran wrote:
And is it possible to play the background video in it? :O
That would be awesome!
The answer is simple, you must rename your hitcircleoverlay to hitcircleoverlay-0, the hitcircle and hitcircleoverlay must be transparent.Keanulaszlo wrote:
Could someone explain how to remove slider ends (I know how to do this) and not break 10+ combos?
Here is what I mean:
This is from Legendre's latest video, https://www.youtube.com/watch?v=5kD2JFYOqjQ.
He has the slider ends removed, which I know you edit the default numbers to look like hitcircles, but how isn't it broken for 10+ combos?
It's okay if You keep It personally (not publishing It)STYNGY wrote:
Hi there peoples.I have a question.Is it okay that i'm using parts of map's skin in my skin? (Sorry for bad English ^_^)
well it's solve my problem now thanks vahn10vahn10 wrote:
The answer is simple, you must rename your hitcircleoverlay to hitcircleoverlay-0, the hitcircle and hitcircleoverlay must be transparent.
^see combo number 10 to show that it worked
Proof Skin
What will be if i'll publicate it?satriobp wrote:
It's okay if You keep It personally (not publishing It)STYNGY wrote:
Hi there peoples.I have a question.Is it okay that i'm using parts of map's skin in my skin? (Sorry for bad English ^_^)
I mean You can mix your skin by using some elements from other skins, but since It's not Yours... You're not allowed to posting/publishing Your mixed skin in the Skinning SF (but You can keep the link in Your userpage or signature though)STYNGY wrote:
What will be if i wanna publicate it?
Please don't use other people's skin elements in your skin without the creator's permission.
Nobody likes it when people take your hard work and claim it for themselves, so make sure you ask permission from the original skinner and credit them in your skin when you use their skin elements.
Ask the mapper if you're allowed to use the files.STYNGY wrote:
What will be if i'll publicate it?
Thanks for replysatriobp wrote:
I mean You can mix your skin by using some elements from other skins, but since It's not Yours... You're not allowed to posting/publishing Your mixed skin in the Skinning SF (but You can keep the link in Your userpage or signature though)STYNGY wrote:
What will be if i wanna publicate it?Please don't use other people's skin elements in your skin without the creator's permission.
Nobody likes it when people take your hard work and claim it for themselves, so make sure you ask permission from the original skinner and credit them in your skin when you use their skin elements.
Thanks for replyComet wrote:
Ask the mapper if you're allowed to use the files.STYNGY wrote:
What will be if i'll publicate it?
Let's take an example:STYNGY wrote:
But who shall i ask permission for if skin were doing by 3 peoples?
Thanks,but what if i don't know who did each element?Comet wrote:
Let's take an example:STYNGY wrote:
But who shall i ask permission for if skin were doing by 3 peoples?
1. shavit made cursor.png
2. Shavit-sama made hitcircle.png
3. Comet made sliderb-0.png until sliderb-9.png
If shavit allows you to use his elements, you can use cursor.png.
If Shavit-sama allows you to use his elements, you can use hitcircle.png.
If Comet allows you to use his elements, you can use the slider ball animation.
Ask the mapper, if he won't answer in 3 days then I think you can post with saying that you can't contact the elements' creators and that you will remove their elements if they will contact you about that.STYNGY wrote:
Thanks,but what if i don't know who did each element?
Thanks,i'll do thatComet wrote:
Ask the mapper, if he won't answer in 3 days then I think you can post with saying that you can't contact the elements' creators and that you will remove their elements if they will contact you about that.STYNGY wrote:
Thanks,but what if i don't know who did each element?
Download the updated default template here, it has all the newer mod icons like Cinema and Target Practice.dws123 wrote:
Can someone please list all the mod files and where they are when you go to the mod selection screen? (thanks in advance)
I'm having trouble finfong out what "target" is reference here
What color are you trying to change it to? From your .ini your slider should be black.mrgkevin wrote:
I still can't change my slider color
My skin.ini looks like this http://puu.sh/9kkYL/8225954feb.png
Actually when I go into a map my slider is not black. Im trying to make the slider inside black and red on the outsideTouchFluffyTail wrote:
What color are you trying to change it to? From your .ini your slider should be black.mrgkevin wrote:
I still can't change my slider color
My skin.ini looks like this http://puu.sh/9kkYL/8225954feb.png
maybe this can help? put it in colours sectionmrgkevin wrote:
Actually when I go into a map my slider is not black. Im trying to make the slider inside black and red on the outside
SliderBorder: 255,0,0
SliderTrackOverride: 0,0,0
SliderTrackOverride: 0,0,0Yours looks correct but maybe try copy-pasting my line in there and see if anything changes.
It still isn't black. Does it have to do something with the files in my skin folder that isn't the skin.ini?TouchFluffyTail wrote:
Strange, since that's what it should be showing up as. Have you re-loaded your skin since you made the changes?
Also just for reference, my sliders are black and in my .ini the line isSliderTrackOverride: 0,0,0Yours looks correct but maybe try copy-pasting my line in there and see if anything changes.
Edit; Sniped.
Didn't work eitherdws123 wrote:
maybe this can help? put it in colours sectionmrgkevin wrote:
Actually when I go into a map my slider is not black. Im trying to make the slider inside black and red on the outsideSliderBorder: 255,0,0
SliderTrackOverride: 0,0,0
They're image files.mrgkevin wrote:
Is there a way to change the font for the numbers in hit circles?
disable "hit lightning" in the graphic option?mrgkevin wrote:
Where do I disable the sparkle after I hit a note in my skin
particle50.pngmrgkevin wrote:
I want that. After I hit a note, there's fireworks PLUS the the hit lightning.
loiso_pondohva wrote:
Hey is there any way to make hitcircles disappear instantly after hitting - without expanding and fading? Tried leaving hitcircle and hitcircleoverlay blank (used numbers instead XD) but expanding/fading remained. How can i opt this???
You can't. Hitcircles have a set animation that isn't changeable.loiso_pondohva wrote:
Hey is there any way to make hitcircles disappear instantly after hitting - without expanding and fading? Tried leaving hitcircle and hitcircleoverlay blank (used numbers instead XD) but expanding/fading remained. How can i opt this???
Then developers must fix thisTouchFluffyTail wrote:
You can't. Hitcircles have a set animation that isn't changeable.loiso_pondohva wrote:
Hey is there any way to make hitcircles disappear instantly after hitting - without expanding and fading? Tried leaving hitcircle and hitcircleoverlay blank (used numbers instead XD) but expanding/fading remained. How can i opt this???
Sure you can i not remember the name of sound for comboburst but for random comboburst just add thisAce199212 wrote:
Help....
Can i do few sound effects (wav/mp3) for combobursts?
If is possible to do random comboburst image, so it's working same with sounds? D:
ComboBurstRandom : 1to your skin.ini in [General] section
STYNGY wrote:
Hi there guys.Can someone help me with ranking panel?I can't get it right
Well first i wanna know how to position all of elements of panel.[cocoa] wrote:
okay........ so ranking panel like what you wanna make??STYNGY wrote:
Hi there guys.Can someone help me with ranking panel?I can't get it right
Thanks but i wanna do myself ranking panel for my skinChaoslitz wrote:
STYNGY wrote:
Hi there guys.Can someone help me with ranking panel?I can't get it right
Here is one of my ranking panel (Not @2x)
To see if the size is fit for you or take a reference :3
It is just a referenceSTYNGY wrote:
Thanks but i wanna do myself ranking panel for my skin
I know it too,but i can't set elements right in panel,+ i can't do myself panelChaoslitz wrote:
It is just a referenceSTYNGY wrote:
Thanks but i wanna do myself ranking panel for my skin
I know that making by yourself is better
Those position need to adjust along those scorenumbersSTYNGY wrote:
I know it too,but i can't set elements right in panel,+ i can't do myself panel
Which programm should i use to create ranking panel?Chaoslitz wrote:
Those position need to adjust along those scorenumbersSTYNGY wrote:
I know it too,but i can't set elements right in panel,+ i can't do myself panel
so the position may not be same with other ranking panel compared @@
I use Photoshop to create itSTYNGY wrote:
Which programm should i use to create ranking panel?
Thanks a lot of for helpChaoslitz wrote:
I use Photoshop to create itSTYNGY wrote:
Which programm should i use to create ranking panel?
but it is optional
Is there any way to have a different image for the retry button in the pause screen and in the ranking screen?[cocoa] wrote:
well did you check the name of file??? you know on v2.2 "ranking-replay,retry & back.png" it's not working again so you should re-naming the file to "pause-replay" for replay and "pause-retry" for retry, anyway can you provide the screenshot of the element who not working pls.Fahe wrote:
Thank you cocoa,
checked the files type and they are .png, tried to change the skin.ini as you suggested, none of them worked (it was already set to 2.2).
I'm really puzzled as these two buttons are the only thing not working in the skin...
NoSarah Katherine wrote:
Hi, can anyone help me in slider part:
I want to add sliderpoint10 and sliderpoint30 to my skin, but it don't work (the score image not appear when hit slider). I tried change the skin.ini: delete the line Version: 2, and the sliderpoint finally appeared. But other element has been appeared as old version (especially the spinner). So is there anywat to keep using skin version 2, while included the sliderpoint?
No, just create folder "User" on skins folder and put your followpoint herebrezals wrote:
If I just want to change one thing on the default skin, do I need to create a skin file?
If you want always use your followpoint just enable thisbrezals wrote:
I saw a followpoint I liked on a song, so I just grabbed the followpoint files from that song to my skin folder, but obviously it is not that simply, so my question is what is the easiest way to be able to use that followpoint on all songs?
Host your image on a image host website, like imgur.com then just copy the image adress, and press "img" and copy it between the brackets.Richard2q2 wrote:
Guys I have a problem, so I'm just making my own skin for my own use. My hitcircle overlay looks different to my slider overlay.
How to explain this....
How do i put a pic here
brezals wrote:
Host your image on a image host website, like imgur.com then just copy the image adress, and press "img" and copy it between the brackets.Richard2q2 wrote:
Guys I have a problem, so I'm just making my own skin for my own use. My hitcircle overlay looks different to my slider overlay.
How to explain this....
How do i put a pic here
The brackets looks like this (img) (/img) but with [ ] instead of ( )
Aaaaand it has nothing to do with asked question...vahn10 wrote:
remove "SliderTrackOverride:" Line in the skin.ini
Sadly you are unable to do that on sliders since they are unskinnable and hitcircles are just placed on them. You can only change colour of slider by using "SliderTrackOverride" in skin.ini but I don't think it helps you much.Richard2q2 wrote:
Yay i got it! yeah so i want the have the hollow part of the hit circles for my sliders too. How do i do that?
wattttttt really? Cos the skin i took the elements from has its sliders the same as its hitcircles. HowwMLGnom wrote:
Aaaaand it has nothing to do with asked question...vahn10 wrote:
remove "SliderTrackOverride:" Line in the skin.iniSadly you are unable to do that on sliders since they are unskinnable and hitcircles are just placed on them. You can only change colour of slider by using "SliderTrackOverride" in skin.ini but I don't think it helps you much.Richard2q2 wrote:
Yay i got it! yeah so i want the have the hollow part of the hit circles for my sliders too. How do i do that?
um what do u mean? Like make a file called that? Lol im not really good at this sozOsuMe65 wrote:
Add SliderTrackOverride: 0,0,0 under [Colours] section in your skin.ini (if i'm correct with that name)
That will replicate the screenshot you'd posted earlier.
Can't guarantee a 100% success though
Search in your skin folder a file named "skin.ini" and add what he saysRichard2q2 wrote:
um what do u mean? Like make a file called that? Lol im not really good at this sozOsuMe65 wrote:
Add SliderTrackOverride: 0,0,0 under [Colours] section in your skin.ini (if i'm correct with that name)
That will replicate the screenshot you'd posted earlier.
Can't guarantee a 100% success though
HitCircleOverlap: *number*Chaoslitz wrote:
Anyone know that how to make it only showing 1 dot in the default numbers@@?
Oh thanks!satriobp wrote:
HitCircleOverlap: *number*Chaoslitz wrote:
Anyone know that how to make it only showing 1 dot in the default numbers@@?
(number is replaced with the value of Your default number width)
In the skin.ini file which is located in your skin's folder, find SliderTrackOverride: 0,0,0. If it isn't there under the colours section, then add it. If it is there and has 2 dashes in front of it (//SliderTrackOverride: 0,0,0), remove the dashes.Richard2q2 wrote:
um what do u mean? Like make a file called that? Lol im not really good at this sozOsuMe65 wrote:
Add SliderTrackOverride: 0,0,0 under [Colours] section in your skin.ini (if i'm correct with that name)
That will replicate the screenshot you'd posted earlier.
Can't guarantee a 100% success though
In the skin.ini file which is located in your skin's folder, find SliderTrackOverride: 0,0,0. If it isn't there under the colours section, then add it. If it is there and has 2 dashes in front of it (//SliderTrackOverride: 0,0,0), remove the dashes.Thanks! worked
Are you sure it's in the [General] section of your Skin.ini? And it has the Proper capitalization?TanderXS wrote:
Hi
I posted this a few hours ago:
p/3158651
and a user told me to ask here.
I tried the solution he gave me and nothing. The slider ticks points won't appear.
Any ideas?
Thanks.