forum

[confirmed] Windows 10 Creator update Cursor & Raw Input issues.

posted
Total Posts
191
Topic Starter
Dntm8kmeeatu
If you are using the latest Windows 10 "Creators" update, then you most likely are experiencing an issue with your Tablet peripheral not working as intended, or your cursor being stuck in the top left of your screen.

This seems to be an issue with Windows Ink & Raw input in the latest Windows update, as having Windows Ink and or Raw input enabled causes the cursor to not work for most.

Currently the only "fix" or workarounds are to;
  1. Disable Windows Ink
    Wacom Tablets / Huion H430P / Gaomon S620
    For Wacom / Huion H430P / Gaomon S620 Tablet Users, there should be a checkbox in your Tablet Driver settings to disable / enable Windows ink. You want to uncheck it.

    For Wacom tablets, it is located in the Mapping section of your drivers:


    For the Huion H430P and Gamon S620, it is located in the Digital Pen section of your drivers:




    Huion / Other
    For Huion (excluding the H430P) or other Tablets, Please check for a "Support TabletPC" option or checkbox, disable it.

    If the driver you are using does not have a checkbox toggle, you may have to follow the steps in the below box named Secondary Method. Just note, this will probably only work with very rare or outdated drivers / tablets. Please look for a Support TabletPC toggle instead. Or install the latest drivers.


    Huion / Other Secondary Method TRY THE ABOVE BOX FIRST PLEASE

    1. Find your tabletconfig.ini in your driver folder.
    2. Change SupportINKDisalbe to 0 (Disable) Might be different dependent on language.


    Visual Representation courtesy of of pasi123567



    If you don't have a Huion tablet, I'm sure the procedure should be similar. If you can't figure it out. Try Googling your Tablet and seeing if you can't find out the info there.
  2. Disable Raw Input
    If you are using a tablet, you should be keeping your sensitivity to 1x and disabling raw input ingame. If you wish to change your area, please use your tablets drivers to change the active area instead of changing sensitivity.


These "luckily" seem to work a good Majority of the time. If none work, please check the replies to this thread for any other potential fix. It's also possible your issue is caused by something else, and not this one specifically.

Do remember that having your sensitivity set to anything not 1x will force Raw Input, and so you will have to set your sensitivity to 1x.

If this messed up your Tablet Area, please change the active area in your Tablet Driver Settings instead of using Sensitivity ingame.


This thread serves to show this is a known current issue. Please do not post in this thread unless you have found another Workaround or "Fix", and or have some information that could be useful to this issue.

DO NOT BUMP THIS THREAD WITH "Thanks", "same", or "I have this issue too and none of the fixes work :(" If none of the fixes work, you can try making a new thread, as it's possible this is not your issue.

Curse you Windows 10.

Locked to prevent nonsensical replies, as the Information is still current as is THE FIX for the issue. If you still have trouble after attempting these steps, make a new thread.
pinapelz
Has there already been a fix for this other than those two options?
If not then would you be able to tell me approximately when will this be fixed?

Thanks
Topic Starter
Dntm8kmeeatu

pinapelz wrote:

Has there already been a fix for this other than those two options?
If not then would you be able to tell me approximately when will this be fixed?

Thanks
No other current "Fixes" exist, otherwise they would be listed.

peppy seems to be aware something is not quite right. No confirmed "fix" has been said to be in the works though. At least not in the old client, lazer could be another story. I can't say for sure though.
maksimkurb
Hi. If you don't want to disable and enable Windows Ink each time, you can add osu! application in Wacom settings and disable Windows Ink only for it:

There is a "+" button at the right side of applications list
Thildou-Ookami
Hey it might sound idiot, but how do you open the window you show about "Wacom" ?
I own a Wacom Tablet and I don't have the same "Wacom Tablet Properties" window !
Thank you if you can help me ^^
Topic Starter
Dntm8kmeeatu

Thildou-Ookami wrote:

Hey it might sound idiot, but how do you open the window you show about "Wacom" ?
I own a Wacom Tablet and I don't have the same "Wacom Tablet Properties" window !
Thank you if you can help me ^^
Just search "Wacom" on your computer, should look like this;
glissenning
ive turned supportinkdisable to 0 on my huionh420 already but it still does not work. It only does work if i turn off raw input, which is not what i want, is this the same for wacom tablets?
Topic Starter
Dntm8kmeeatu

GLIED wrote:

ive turned supportinkdisable to 0 on my huionh420 already but it still does not work. It only does work if i turn off raw input, which is not what i want, is this the same for wacom tablets?
Check the .ini for any other line entries mentioning Ink, apparently some drivers have two lines. If it doesn't, or the Windows Ink doesn't work. Disabling raw input is all you can do. I believe this is the same with Wacom Tablets.
Dani3lse
Additional for Huion: Disable the "supportTabletPC" checkbox in the main driver window. (on the 420)
(Can be called different due to Translation)
SylarPC
mY WACOM TABLET PROPERTIES DOSNT HAVE THAT OPTION
Dratornic

Dani3lse wrote:

Additional for Huion: Disable the "supportTabletPC" checkbox in the main driver window. (on the 420)
(Can be called different due to Translation)
Thanks Dude! :)
tamakama
If I don't have a graphics tablet driver or settings, and use the windows 8. 1 +, I can't fix the error?
Topic Starter
Dntm8kmeeatu

tamakama wrote:

If I don't have a graphics tablet driver or settings, and use the windows 8. 1 +, I can't fix the error?
I don't believe Windows 8.1 should even have this error.
clefairy_old_1
I have this problem with my Bamboo Capture and I don't have the option to disable Windows Ink in my tablet settings?
tamakama
I don't believe Windows 8.1 should even have this error.
I have this problem, so... :/ He started just after the update
JSE

tamakama wrote:

I don't believe Windows 8.1 should even have this error.
I have this problem, so... :/ He started just after the update
You can't be running Windows 8.1 and have this issue, as it was due to an update to Windows Ink in the creators update. Any issue you're having if you're running anything older than Windows 10 creators update is a different issue.
BlueCMoon
I solved this error with things that were said in this forum, so this is an example of this working for somebody. I use a Monoprice 10x6.25 which is pretty much just a Huion. I disabled windows ink and unchecked "supportTabletPC" and now it works properly. So anyone with a Huion or Huion re-brand do those two things and you should be fine. :) If that doesn't work then I dunno. >~<
RubMyBabied
For Huion Tablets (or at least the H420) you can open the Graphic Tablet (which should be in your hidden taskbar) and disable Support TabletPC. It fixed for me.
DivineBakaYato_
This fix didn't work
Terrmmy
what if my Wacom Tablet Properties doesn't have the Windows Ink feature?
Topic Starter
Dntm8kmeeatu

Terrmmy wrote:

what if my Wacom Tablet Properties doesn't have the Windows Ink feature?
Then switch to Drivers that do, or disable raw input.
Leozinho
I unchecked the "tabletPC support" option in the Huion 420 settings menu, this worked for me
skillzprotech
one way that fixed it for me is to disable windows ink in the wacom settings
skillzprotech
it doesnt work but thanks for helping
Topic Starter
Dntm8kmeeatu

skillzprotech wrote:

one way that fixed it for me is to disable windows ink in the wacom settings
ok

skillzprotech wrote:

it doesnt work but thanks for helping
what do you even mean
Mooshrooman
How does one find windows ink in the wacom settings?
Zedrik
it doesn't work for me, i have a Genius EasyPen i405x
DragonWind1423
For those with a Wacom tablet, and you do not have the "Windows Ink" under "mapping", that means your Wacom driver is out of date. I didn't have it, and I updated my driver on the Wacom site. You can find your driver here: http://www.wacom.com/en/support/product-support/drivers
Make sure to uninstall your driver first, or if you have the Wacom Desktop Center, update your driver through there. A quick google search will help with uninstalling if you don't know how. Just make sure to install the correct driver for your tablet to work correctly. Your tablet model should be on the back label.
Hope that helps someone!~
:)
CharaTyan
The problem is this: the cursor does not listen at all, it jumps in different directions as it can and can not. Smoothly moving seconds 2-3 then starts jumping. The spinner turns normally, but it's almost impossible to hit the notes. Before that, everything was in order.
The tablet XP-Pen G430 is used.
To solve the problem, the problem dawned in the Osu! Settings, but nothing helped. The same system with the firewood tablet. Also tried rebooting, shutting down the antivirus (was installed today), the very update of Osu !. Outside Osu! The cursor behaves adequately, so the problem is in Osu itself.
UPD: It was noticed that when you turn on direct input, the situation worsens.
Pls help(
Ns-Abel
My cursor was stuck in the left side of the screen so i find this page and disabled suport ink on my huion tablet it worked . yeah cool but i shut down osu and come back 1 hour later my cursor is stuck again ...
Please help me ink mod is disabled and i cant do anything rly want to play osu! :( :( :( :( :( :( :( :( :(
sHootR

FckTheGame wrote:

My cursor was stuck in the left side of the screen so i find this page and disabled suport ink on my huion tablet it worked . yeah cool but i shut down osu and come back 1 hour later my cursor is stuck again ...
Please help me ink mod is disabled and i cant do anything rly want to play osu! :( :( :( :( :( :( :( :( :(
Disable RAW-input and take into consideration that you might forgot to save it. :)
S1cK
So anything above or below 1x will force raw input?
Isnt that a good thing?
yuzurihAnne

Dani3lse wrote:

Additional for Huion: Disable the "supportTabletPC" checkbox in the main driver window. (on the 420)
(Can be called different due to Translation)

Thanks so much.. problem fixed!! :) :D
TeachMeSenpai
omg ty so much dude
bandit
Does the CTH 460 Touch still work? Because I cant get it to work.
Topic Starter
Dntm8kmeeatu

wasli wrote:

Does the CTH 460 Touch still work? Because I cant get it to work.
I don't know what you mean by this.
bandit

Dntm8kmeeatu wrote:

wasli wrote:

Does the CTH 460 Touch still work? Because I cant get it to work.
I don't know what you mean by this.
Like I cant find a driver for the CTH 460 Touch that supports windows 10
Yume_chan_1997
I have have a One by Wacom and my Tablet settings are diffrent as it shown here :/
Topic Starter
Dntm8kmeeatu

Yume_chan_1997 wrote:

I have have a One by Wacom and my Tablet settings are diffrent as it shown here :/
Each Driver might be slightly different, please just attempt to replace and adapt to figure it out. (unless your version do not show any options anywhere near what is suggested)
SmasHero
.
- Mob -
I have a Wacom Bamboo Splash tablet and the driver is old and doesn't have windows ink or whatever. I checked and from what I can see the new drivers don't have support with my tablet, plus I updated my driver and it still doesn't have the "mapping" tab. Please help me find another way to fix this issue with my Osu!
- Mob -
Really guys I need a fix I can't play the game anymore get on it peppy
Topic Starter
Dntm8kmeeatu

Moblewter wrote:

Really guys I need a fix I can't play the game anymore get on it peppy

It's more an issue with the OS than the game. There isn't much to tell you other than install a different version of Windows (that's an extreme step, and not really recommended.) If the drivers don't support changing the area of the tablet, you're just shit out of luck really. Only other thing you can do is wait.
- Mob -

Dntm8kmeeatu wrote:

Moblewter wrote:

Really guys I need a fix I can't play the game anymore get on it peppy
It's more an issue with the OS than the game. There isn't much to tell you other than install a different version of Windows (that's an extreme step, and not really recommended.) If the drivers don't support changing the area of the tablet, you're just shit out of luck really. Only other thing you can do is wait.
I've been checking everyday to see if it works for like the past couple weeks, hopefully a fix will come soon...
ZalelTribal
So like.. I just got my Huion 420 tablet, I'm using windows 10 with the most recent update, and the cursor lags (when i click with the pen it'll hop to the upper left corner of the screen.. but yeah the cursor will literally freeze for a moment as i play osu) Theres nothing i can do to fix this lag luster?
Upskirt
Press F10 in-game to disable mouse buttons.

ZalelTribal wrote:

So like.. I just got my Huion 420 tablet, I'm using windows 10 with the most recent update, and the cursor lags (when i click with the pen it'll hop to the upper left corner of the screen.. but yeah the cursor will literally freeze for a moment as i play osu) Theres nothing i can do to fix this lag luster?
Koemi

Dntm8kmeeatu wrote:

If you are using the latest Windows 10 "Creators" update, then you most likely are experiencing an issue with your Tablet peripheral not working as intended, or your cursor being stuck in the top left of your screen.

This seems to be an issue with Raw input in the latest Windows update, as having Raw input enabled causes the cursor to not work for most.

Currently the only "fix" or workarounds are to;

  1. Disable Raw Input

  2. Disable Windows Ink
    Wacom Tablets
    For Wacom Tablet Users, there should be a checkbox in your Tablet Driver settings to disable / enable Windows ink.

    You want it unchecked like so.


    Huion / Other
    For Huion or other Tablets, if the driver you are using does not have a checkbox toggle, you may have to follow these steps.
    1. Find your tabletconfig.ini in your driver folder.

    2. Change SupportINKDisalbe to 0 (Disable) Might be different dependent on language.
    Visual Representation courtesy of of pasi123567



    If you don't have a Huion tablet, I'm sure the procedure should be similar. If you can't figure it out. Try Googling your Tablet and seeing if you can't find out the info there.
  3. Rollback to the previous Windows update.
These "luckily" seem to work a good Majority of the time. If none work, it's possible your issue is caused by something else, and not this one specifically.

Do remember that having your sensitivity set to anything not 1x will force Raw Input, and so you will have to set your sensitivity to 1x.

If this messed up your Tablet Area, please change the active area in your Tablet Driver Settings instead of using Sensitivity ingame.

This thread serves to show this is a known current issue. Please do not post in this thread unless you have found another Workaround or "Fix", and or have some information that could be useful to this issue.

DO NOT BUMP THIS THREAD WITH "Thanks", "same", or "I have this issue too and none of the fixes work :(" If none of the fixes work, you can try making a new thread, as it's possible this is not your issue.

Curse you Windows 10.
I solved the problem with this tutorial ( I have a Huion 420 ): https://www.windowscentral.com/how-disa ... windows-10
Koemi
Solved on Windows 10 With my Huion 420 Following This !

https://www.windowscentral.com/how-disa ... windows-10
ZalelTribal

Venzire wrote:

Press F10 in-game to disable mouse buttons.

ZalelTribal wrote:

So like.. I just got my Huion 420 tablet, I'm using windows 10 with the most recent update, and the cursor lags (when i click with the pen it'll hop to the upper left corner of the screen.. but yeah the cursor will literally freeze for a moment as i play osu) Theres nothing i can do to fix this lag luster?
I disabled the mouse buttons but the cursor is still lagging when i play.
Abyr
i have a fix, run your tablet driver in administrative mode. always works for me :D
show more
Please sign in to reply.

New reply