Welcome! o/

❤️ | Thanks to everyone who donated osu! supporter! I love you guys so much <3 | ❤️

Video example:
Houkago Rakuenbu - Houkago Kakumei [Revolution!] played on Zorin OS


Here's a guide for installing Linux Mint, osu! and OpenTabletDriver:
https://youtu.be/PH-ovqMG5_0

A small introduction:

osu! working fine on Linux has been a thing for many years now, especially thanks to community patches and help, but it's time to make it even easier 8)
To install the game, we'll use my osu-winello script you can find at GitHub, which will handle the install itself.

Well, time to install osu! now!

Installation:

Just follow the commands and you'll be good e.e

========================================================================

Prerequisites:

First of all, check if you've already installed your GPU drivers.
You can read how to do that at here.

Then install PipeWire using the following commands (according to your distro):

Installing PipeWire

Nowadays, PipeWire is already shipped by default on most distros.
Check if it's already on your system with:

export LANG=C
pactl info | grep "Server Name"

If this shows: Server Name: PulseAudio (on Pipewire), then you're good to go.

Otherwise, follow the instructions at the link below:
https://github.com/NelloKudo/osu-winello/wiki/Installing-PipeWire

Now install the dependencies needed for the script to work:

Dependencies:

Debian (Ubuntu, Linux Mint, Pop!_OS etc..):

sudo apt install -y git wget zenity xdg-desktop-portal

Arch Linux (Manjaro, Endeavour OS, etc.):

sudo pacman -Sy --needed --noconfirm git wget zenity xdg-desktop-portal

Fedora:

sudo dnf install -y git wget zenity xdg-desktop-portal

openSUSE:

sudo zypper install -y git wget zenity xdg-desktop-portal

Done with prerequisites, time for the proper installation e.e

========================================================================

Installing osu!:

Installing the game is just as simple as this:

git clone https://github.com/NelloKudo/osu-winello.git
cd osu-winello
chmod +x osu-winello.sh
./osu-winello.sh

Follow the script's instructions and the installation will work with no problems!
You can launch the game after relaunching your terminal with:

osu-wine

or just using the shortcuts installed by the script e.e

But before playing, you need to adjust your universal offset to around -35ms, so that your osu! will sound just like on Windows.



Warning: -35ms is what I generally recommend, but try to find your sweet spot from -40ms!

And you're done! You can now play osu!



The script is bundled with some great tools too, you can check those with:

osu-wine --help

Check the troubleshooting box if you need any help or just write me on Discord (marshnello)
You can also ask on ThePooN's Discord Server, they can provide you with lots of help!

...and that's it! Enjoy playing osu! on Linux!

You used the old guide before and want the latest updates? See this.

Got any error (Input lag, random crashes etc.) or want some more features?
Check the box below!:

1. KatouMegumi's guide

1. ThePooN's Discord server

1. GonX's wine-osu builds

1. hwsnemo's prepackaged wine-osu and patches

1. l3lackShark's gosumemory

- Marco - wrote:

Welcome to Linux or as I've recently taken to calling it, GNU plus Linux👍

MarshNello wrote:

final result:

https://youtu.be/Ve4qr3jmDbM

A little introduction:

osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide (https://osu.ppy.sh/community/forums/topics/367783), which are probably the best methods even now. However, in my case both ended up in a broken installation, so I kept searching for ways to install osu! until I actually managed to run it perfectly thanks to some workarounds. It's a pretty easy guide, written especially for beginners (just like me xd), so if you want to install osu! on your Linux distro, just keep reading e.e

PREREQUISITES:
install the following: git, build-essential, dialog, curl.

- sudo apt install git
- sudo apt install build-essential
- sudo apt install dialog
- sudo apt install curl

install wine (the script will do it itself but it's better to have it):
https://wiki.winehq.org/Download

also make sure you installed proprietary drivers for your gpu if you need to
guide for it: https://itsfoss.com/install-additional-drivers-ubuntu/

GUIDE:

to set up our osu!, we'll use osu-install script from yurisuki (credits to him):
https://gitlab.com/yurisuki/osu-install

just follow the instructions here and install it: https://gitlab.com/yurisuki/osu-install#how-do-i-execute-this-script

once you start the script, just follow its instructions.
the script was supposed to do everything automatically, from installing osu! to the patch, but it actually crashes after installing osu! and running it. That's fine, because we'll only use it for the installation indeed.

the steps to make it work are:

- step 1: run it the first time, follow the script's instructions which will install everything but, in the part supposed to run osu!, it shouldn't start (if it starts, skip to step 3); so run the script again.

- step 2: follow the script's instructions again until it starts osu! (if you get "osu! crashed", just click on restart osu! and it should be working now.)

- step 3: the game is now working fine: close it, press whatever key you want on the terminal and the script should crash. that's fine, move on to step 4.

- step 4: run the script again for the last time and follow whatever it says, until it runs osu! again. When it starts, close the game and close the terminal by pressing any key.

our osu! is now completely set up and working fine, but we gotta apply thepoon's patch for latency and create a script to launch (or eventually, kill) the game.

LATENCY PATCH:

let's begin with the patch:

- open the terminal as root using sudo su
sudo su

- type:
mkdir -p /etc/pulse/daemon.conf.d/

echo "high-priority = yes
nice-level = -15

realtime-scheduling = yes
realtime-priority = 50

resample-method = speex-float-0

default-fragments = 2 # Minimum is 2
default-fragment-size-msec = 2 # You can set this to 1, but that will break OBS audio capture." | sudo tee -a /etc/pulse/daemon.conf.d/10-better-latency.conf

(WARNING: if after applying this the system's audio is garbage, increase default-fragment-size-msec by 2, save and reboot)

- then type:
nano /etc/security/limits.conf

- scroll to the bottom of the file and add:
echo "USERNAME - nice -20

USERNAME - rtprio 99" >> /etc/security/limits.conf

- replace USERNAME with your username, save the file with ctrl+o and exit with ctrl+x.

- now open /etc/pulse/default.pa with
nano -c /etc/pulse/default.pa

- here somewhere near lines 40/50 you should find this line:
load-module module-udev-detect

- once you find it, add tsched=0 to the end of it, so like this:
load-module module-udev-detect tsched=0

save the file again with ctrl+o and exit with ctrl+x.

the patch is now applied. reboot your pc to apply the changes and go on with the guide e.e

OSU LAUNCHER:

we're almost done! the last thing to do is create a script to start the game.
to do that:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/
(if z: isn't your drive here, just search for the right one)

- type this to create the osu script:
cat > osu << "EOF"

- now paste in the terminal the following (always replacing username with yours):

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wine /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/osu\!.exe "$@"
EOF

- in the end launch these two commands.
sudo mv osu /usr/bin/
sudo chmod +x /usr/bin/osu

you can now launch your osu! by typing "osu" in the terminal!
to create a script to kill osu!, just in case it won't launch for any reason, let's do this:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/

- type this to create the osukill script:
cat > osukill << "EOF"

- now paste in the terminal the following:

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wineserver -k
EOF

- in the end launch again these two commands.
sudo mv osukill /usr/bin/
sudo chmod +x /usr/bin/osukill

you can now kill osu by typing osukill in the terminal when you need to

END
And that's it! Your osu! should now work perfectly fine!
Last but not least: you can also create a desktop shortcut for it, by left clicking on your desktop and selecting "create a launcher". It should look like this:



Well, that's the end of the guide! Thanks for reading, and have fun playing osu! on your linux <33

_Buddy wrote:

MarshNello wrote:

final result:

https://youtu.be/Ve4qr3jmDbM

A little introduction:

osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide (https://osu.ppy.sh/community/forums/topics/367783), which are probably the best methods even now. However, in my case both ended up in a broken installation, so I kept searching for ways to install osu! until I actually managed to run it perfectly thanks to some workarounds. It's a pretty easy guide, written especially for beginners (just like me xd), so if you want to install osu! on your Linux distro, just keep reading e.e

PREREQUISITES:
install the following: git, build-essential, dialog, curl.

- sudo apt install git
- sudo apt install build-essential
- sudo apt install dialog
- sudo apt install curl

install wine (the script will do it itself but it's better to have it):
https://wiki.winehq.org/Download

also make sure you installed proprietary drivers for your gpu if you need to
guide for it: https://itsfoss.com/install-additional-drivers-ubuntu/

GUIDE:

to set up our osu!, we'll use osu-install script from yurisuki (credits to him):
https://gitlab.com/yurisuki/osu-install

just follow the instructions here and install it: https://gitlab.com/yurisuki/osu-install#how-do-i-execute-this-script

once you start the script, just follow its instructions.
the script was supposed to do everything automatically, from installing osu! to the patch, but it actually crashes after installing osu! and running it. That's fine, because we'll only use it for the installation indeed.

the steps to make it work are:

- step 1: run it the first time, follow the script's instructions which will install everything but, in the part supposed to run osu!, it shouldn't start (if it starts, skip to step 3); so run the script again.

- step 2: follow the script's instructions again until it starts osu! (if you get "osu! crashed", just click on restart osu! and it should be working now.)

- step 3: the game is now working fine: close it, press whatever key you want on the terminal and the script should crash. that's fine, move on to step 4.

- step 4: run the script again for the last time and follow whatever it says, until it runs osu! again. When it starts, close the game and close the terminal by pressing any key.

our osu! is now completely set up and working fine, but we gotta apply thepoon's patch for latency and create a script to launch (or eventually, kill) the game.

LATENCY PATCH:

let's begin with the patch:

- open the terminal as root using sudo su
sudo su

- type:
mkdir -p /etc/pulse/daemon.conf.d/

echo "high-priority = yes
nice-level = -15

realtime-scheduling = yes
realtime-priority = 50

resample-method = speex-float-0

default-fragments = 2 # Minimum is 2
default-fragment-size-msec = 2 # You can set this to 1, but that will break OBS audio capture." | sudo tee -a /etc/pulse/daemon.conf.d/10-better-latency.conf

(WARNING: if after applying this the system's audio is garbage, increase default-fragment-size-msec by 2, save and reboot)

- then type:
nano /etc/security/limits.conf

- scroll to the bottom of the file and add:
echo "USERNAME - nice -20

USERNAME - rtprio 99" >> /etc/security/limits.conf

- replace USERNAME with your username, save the file with ctrl+o and exit with ctrl+x.

- now open /etc/pulse/default.pa with
nano -c /etc/pulse/default.pa

- here somewhere near lines 40/50 you should find this line:
load-module module-udev-detect

- once you find it, add tsched=0 to the end of it, so like this:
load-module module-udev-detect tsched=0

save the file again with ctrl+o and exit with ctrl+x.

the patch is now applied. reboot your pc to apply the changes and go on with the guide e.e

OSU LAUNCHER:

we're almost done! the last thing to do is create a script to start the game.
to do that:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/
(if z: isn't your drive here, just search for the right one)

- type this to create the osu script:
cat > osu << "EOF"

- now paste in the terminal the following (always replacing username with yours):

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wine /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/osu\!.exe "$@"
EOF

- in the end launch these two commands.
sudo mv osu /usr/bin/
sudo chmod +x /usr/bin/osu

you can now launch your osu! by typing "osu" in the terminal!
to create a script to kill osu!, just in case it won't launch for any reason, let's do this:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/

- type this to create the osukill script:
cat > osukill << "EOF"

- now paste in the terminal the following:

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wineserver -k
EOF

- in the end launch again these two commands.
sudo mv osukill /usr/bin/
sudo chmod +x /usr/bin/osukill

you can now kill osu by typing osukill in the terminal when you need to

END
And that's it! Your osu! should now work perfectly fine!
Last but not least: you can also create a desktop shortcut for it, by left clicking on your desktop and selecting "create a launcher". It should look like this:



Well, that's the end of the guide! Thanks for reading, and have fun playing osu! on your linux <33

Hello,

This guide is helpful it's just I'm having trouble with the "LATENCY PATCH" section of the guide. I use first time Linux Manjaro XFCE as my distro and I'm just wondering if I'm using the correct commands.

I know after typeing "sudo su" it opens your terminal as root. But I'm confused on how the terminal should look after you type in "mkdir -p /etc/pulse/daemon.conf.d/" in the terminal. For me it looks like this:



[username@username-pc ~]$ sudo su
[sudo] password for USER:
[username-pc username]#
[username-pc username]# mkdir -p /etc/pulse/daemon.conf.d/
[username-pc username]# echo "high-priority = yes
> nice-level = -15
>
> realtime-scheduling = yes
> realtime-priority = 50
>
> default-fragments = 2
> default-fragment-size-msec = 2
> sudo tee -a /etc/pulse/daemon.conf.d/10-better-latency.conf
>



Is this correct?
Also I'm having trouble with the rest as well. <sorry for being a Linux noob!

Liang J wrote:

is there a way to move my songs from windows to Linux?, i tried to move it directly but the game dosent recognize it

MarshNello wrote:

final result:

https://youtu.be/Ve4qr3jmDbM

A little introduction:

osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide (https://osu.ppy.sh/community/forums/topics/367783), which are probably the best methods even now. However, in my case both ended up in a broken installation, so I kept searching for ways to install osu! until I actually managed to run it perfectly thanks to some workarounds. It's a pretty easy guide, written especially for beginners (just like me xd), so if you want to install osu! on your Linux distro, just keep reading e.e

PREREQUISITES:
install the following: git, build-essential, dialog, curl.

- sudo apt install git
- sudo apt install build-essential
- sudo apt install dialog
- sudo apt install curl

install wine (the script will do it itself but it's better to have it):
https://wiki.winehq.org/Download

also make sure you installed proprietary drivers for your gpu if you need to
guide for it: https://itsfoss.com/install-additional-drivers-ubuntu/

GUIDE:

to set up our osu!, we'll use osu-install script from yurisuki (credits to him):
https://gitlab.com/yurisuki/osu-install

just follow the instructions here and install it: https://gitlab.com/yurisuki/osu-install#how-do-i-execute-this-script

once you start the script, just follow its instructions.
the script was supposed to do everything automatically, from installing osu! to the patch, but it actually crashes after installing osu! and running it. That's fine, because we'll only use it for the installation indeed.

the steps to make it work are:

- step 1: run it the first time, follow the script's instructions which will install everything but, in the part supposed to run osu!, it shouldn't start (if it starts, skip to step 3); so run the script again.

- step 2: follow the script's instructions again until it starts osu! (if you get "osu! crashed", just click on restart osu! and it should be working now.)

- step 3: the game is now working fine: close it, press whatever key you want on the terminal and the script should crash. that's fine, move on to step 4.

- step 4: run the script again for the last time and follow whatever it says, until it runs osu! again. When it starts, close the game and close the terminal by pressing any key.

our osu! is now completely set up and working fine, but we gotta apply thepoon's patch for latency and create a script to launch (or eventually, kill) the game.

LATENCY PATCH:

let's begin with the patch:

- open the terminal as root using sudo su
sudo su

- type:
mkdir -p /etc/pulse/daemon.conf.d/

echo "high-priority = yes
nice-level = -15

realtime-scheduling = yes
realtime-priority = 50

resample-method = speex-float-0

default-fragments = 2 # Minimum is 2
default-fragment-size-msec = 2 # You can set this to 1, but that will break OBS audio capture." | sudo tee -a /etc/pulse/daemon.conf.d/10-better-latency.conf

(WARNING: if after applying this the system's audio is garbage, increase default-fragment-size-msec by 2, save and reboot)

- then type:
nano /etc/security/limits.conf

- scroll to the bottom of the file and add:
echo "USERNAME - nice -20

USERNAME - rtprio 99" >> /etc/security/limits.conf

- replace USERNAME with your username, save the file with ctrl+o and exit with ctrl+x.

- now open /etc/pulse/default.pa with
nano -c /etc/pulse/default.pa

- here somewhere near lines 40/50 you should find this line:
load-module module-udev-detect

- once you find it, add tsched=0 to the end of it, so like this:
load-module module-udev-detect tsched=0

save the file again with ctrl+o and exit with ctrl+x.

the patch is now applied. reboot your pc to apply the changes and go on with the guide e.e

OSU LAUNCHER:

we're almost done! the last thing to do is create a script to start the game.
to do that:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/
(if z: isn't your drive here, just search for the right one)

- type this to create the osu script:
cat > osu << "EOF"

- now paste in the terminal the following (always replacing username with yours):

#!/bin/sh

export STAGING_AUDIO_DURATION=5000
export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wine /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/osu\!.exe "$@"
EOF

- in the end launch these two commands.
sudo mv osu /usr/bin/
sudo chmod +x /usr/bin/osu

you can now launch your osu! by typing "osu" in the terminal!
to create a script to kill osu!, just in case it won't launch for any reason, let's do this:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/

- type this to create the osukill script:
cat > osukill << "EOF"

- now paste in the terminal the following:

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wineserver -k
EOF

- in the end launch again these two commands.
sudo mv osukill /usr/bin/
sudo chmod +x /usr/bin/osukill

you can now kill osu by typing osukill in the terminal when you need to

END
And that's it! Your osu! should now work perfectly fine!
Last but not least: you can also create a desktop shortcut for it, by left clicking on your desktop and selecting "create a launcher". It should look like this:



Well, that's the end of the guide! Thanks for reading, and have fun playing osu! on your linux <33

MarshNello wrote:

final result:

https://youtu.be/Ve4qr3jmDbM

A little introduction:

osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide (https://osu.ppy.sh/community/forums/topics/367783), which are probably the best methods even now. However, in my case both ended up in a broken installation, so I kept searching for ways to install osu! until I actually managed to run it perfectly thanks to some workarounds. It's a pretty easy guide, written especially for beginners (just like me xd), so if you want to install osu! on your Linux distro, just keep reading e.e

PREREQUISITES:
install the following: git, build-essential, dialog, curl.

- sudo apt install git
- sudo apt install build-essential
- sudo apt install dialog
- sudo apt install curl

install wine (the script will do it itself but it's better to have it):
https://wiki.winehq.org/Download

also make sure you installed proprietary drivers for your gpu if you need to
guide for it: https://itsfoss.com/install-additional-drivers-ubuntu/

GUIDE:

to set up our osu!, we'll use osu-install script from yurisuki (credits to him):
https://gitlab.com/yurisuki/osu-install

just follow the instructions here and install it: https://gitlab.com/yurisuki/osu-install#how-do-i-execute-this-script

once you start the script, just follow its instructions.
the script was supposed to do everything automatically, from installing osu! to the patch, but it actually crashes after installing osu! and running it. That's fine, because we'll only use it for the installation indeed.

the steps to make it work are:

- step 1: run it the first time, follow the script's instructions which will install everything but, in the part supposed to run osu!, it shouldn't start (if it starts, skip to step 3); so run the script again.

- step 2: follow the script's instructions again until it starts osu! (if you get "osu! crashed", just click on restart osu! and it should be working now.)

- step 3: the game is now working fine: close it, press whatever key you want on the terminal and the script should crash. that's fine, move on to step 4.

- step 4: run the script again for the last time and follow whatever it says, until it runs osu! again. When it starts, close the game and close the terminal by pressing any key.

our osu! is now completely set up and working fine, but we gotta apply thepoon's patch for latency and create a script to launch (or eventually, kill) the game.

LATENCY PATCH:

let's begin with the patch:

- open the terminal as root using sudo su
sudo su

- type:
mkdir -p /etc/pulse/daemon.conf.d/

echo "high-priority = yes
nice-level = -15

realtime-scheduling = yes
realtime-priority = 50

resample-method = speex-float-0

default-fragments = 2 # Minimum is 2
default-fragment-size-msec = 2 # You can set this to 1, but that will break OBS audio capture." | sudo tee -a /etc/pulse/daemon.conf.d/10-better-latency.conf

(WARNING: if after applying this the system's audio is garbage, increase default-fragment-size-msec by 2, save and reboot)

- then type:
nano /etc/security/limits.conf

- scroll to the bottom of the file and add:
echo "USERNAME - nice -20

USERNAME - rtprio 99" >> /etc/security/limits.conf

- replace USERNAME with your username, save the file with ctrl+o and exit with ctrl+x.

- now open /etc/pulse/default.pa with
nano -c /etc/pulse/default.pa

- here somewhere near lines 40/50 you should find this line:
load-module module-udev-detect

- once you find it, add tsched=0 to the end of it, so like this:
load-module module-udev-detect tsched=0

save the file again with ctrl+o and exit with ctrl+x.

the patch is now applied. reboot your pc to apply the changes and go on with the guide e.e

OSU LAUNCHER:

we're almost done! the last thing to do is create a script to start the game.
to do that:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/
(if z: isn't your drive here, just search for the right one)

- type this to create the osu script:
cat > osu << "EOF"

- now paste in the terminal the following (always replacing username with yours):

#!/bin/sh

export STAGING_AUDIO_DURATION=5000
export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wine /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/osu\!.exe "$@"
EOF

- in the end launch these two commands.
sudo mv osu /usr/bin/
sudo chmod +x /usr/bin/osu

you can now launch your osu! by typing "osu" in the terminal!
to create a script to kill osu!, just in case it won't launch for any reason, let's do this:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/

- type this to create the osukill script:
cat > osukill << "EOF"

- now paste in the terminal the following:

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wineserver -k
EOF

- in the end launch again these two commands.
sudo mv osukill /usr/bin/
sudo chmod +x /usr/bin/osukill

you can now kill osu by typing osukill in the terminal when you need to

END
And that's it! Your osu! should now work perfectly fine!
Last but not least: you can also create a desktop shortcut for it, by left clicking on your desktop and selecting "create a launcher". It should look like this:



Well, that's the end of the guide! Thanks for reading, and have fun playing osu! on your linux <33

Destac wrote:

I have followed the steps and in the end wine gives an error and does not execute it...
I'm with Manjaro.

https://imgur.com/a/rTDopbn

DuckWeeb79 wrote:

help i got a error message after install. osu script something has fucked up.
Log: Oh no, osu! didn't install.

Possibilities are:
You've changed the installation direction.
osu! installer
didn't run.
Some dependencies didn't install.

Try:
Run the script again
Leave the installation direction as it should be (default selected by osu! installer)

If that didn't help try reporting it on GitHub. Thank you. <3.
what do i do i even did the script again its from the aur it still did not work.

yay osu

Project Railgun wrote:

osu! is much easier to install on Arch Linux. You don't have to run any commands like this, just use the AUR package.

yay osu

assuming your AUR helper is yay and you already have wine installed, is all it takes. Latency shouldn't be an issue thanks to PipeWire.

Assert wrote:

Hi, I was wondering if anyone has info on the difference in latency between Windows and Linux? Does it increase/stay the same/decrease? I currently get around 2ms. I want to switch to Linux but I'm worried that the latency might go up.

Assert wrote:

Hi, I was wondering if anyone has info on the difference in latency between Windows and Linux? Does it increase/stay the same/decrease? I currently get around 2ms. I want to switch to Linux but I'm worried that the latency might go up.

Whistle_Python wrote:

i can't hear anything from osu
here's my console
https://content.biomooping.tk/Mb3sOCAoV9.txt

- W i n t e r - wrote:

i get

X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 154 (GLX)
Minor opcode of failed request: 3 (X_GLXCreateContext)
Value in failed request: 0x0
Serial number of failed request: 403
Current serial number in output stream: 404

im on arch and idk how to fix it

Oceana wrote:

Is compatibility mode mandatory? I heard it has an impact on frames

Peoy wrote:

MarshNello wrote:

final result:

https://youtu.be/Ve4qr3jmDbM

A little introduction:

osu! working fine on Linux has been a thing for many years now, especially thanks to ThePoon's patches and Franc[e]sco's guide (https://osu.ppy.sh/community/forums/topics/367783), which are probably the best methods even now. However, in my case both ended up in a broken installation, so I kept searching for ways to install osu! until I actually managed to run it perfectly thanks to some workarounds. It's a pretty easy guide, written especially for beginners (just like me xd), so if you want to install osu! on your Linux distro, just keep reading e.e

PREREQUISITES:
install the following: git, build-essential, dialog, curl.

- sudo apt install git
- sudo apt install build-essential
- sudo apt install dialog
- sudo apt install curl

install wine (the script will do it itself but it's better to have it):
https://wiki.winehq.org/Download

also make sure you installed proprietary drivers for your gpu if you need to
guide for it: https://itsfoss.com/install-additional-drivers-ubuntu/

GUIDE:

to set up our osu!, we'll use osu-install script from yurisuki (credits to him):
https://gitlab.com/yurisuki/osu-install

just follow the instructions here and install it: https://gitlab.com/yurisuki/osu-install#how-do-i-execute-this-script

once you start the script, just follow its instructions.
the script was supposed to do everything automatically, from installing osu! to the patch, but it actually crashes after installing osu! and running it. That's fine, because we'll only use it for the installation indeed.

the steps to make it work are:

- step 1: run it the first time, follow the script's instructions which will install everything but, in the part supposed to run osu!, it shouldn't start (if it starts, skip to step 3); so run the script again.

- step 2: follow the script's instructions again until it starts osu! (if you get "osu! crashed", just click on restart osu! and it should be working now.)

- step 3: the game is now working fine: close it, press whatever key you want on the terminal and the script should crash. that's fine, move on to step 4.

- step 4: run the script again for the last time and follow whatever it says, until it runs osu! again. When it starts, close the game and close the terminal by pressing any key.

our osu! is now completely set up and working fine, but we gotta apply thepoon's patch for latency and create a script to launch (or eventually, kill) the game.

LATENCY PATCH:

let's begin with the patch:

- open the terminal as root using sudo su
sudo su

- type:
mkdir -p /etc/pulse/daemon.conf.d/

echo "high-priority = yes
nice-level = -15

realtime-scheduling = yes
realtime-priority = 50

resample-method = speex-float-0

default-fragments = 2 # Minimum is 2
default-fragment-size-msec = 2 # You can set this to 1, but that will break OBS audio capture." | sudo tee -a /etc/pulse/daemon.conf.d/10-better-latency.conf

(WARNING: if after applying this the system's audio is garbage, increase default-fragment-size-msec by 2, save and reboot)

- then type:
nano /etc/security/limits.conf

- scroll to the bottom of the file and add:
echo "USERNAME - nice -20

USERNAME - rtprio 99" >> /etc/security/limits.conf

- replace USERNAME with your username, save the file with ctrl+o and exit with ctrl+x.

- now open /etc/pulse/default.pa with
nano -c /etc/pulse/default.pa

- here somewhere near lines 40/50 you should find this line:
load-module module-udev-detect

- once you find it, add tsched=0 to the end of it, so like this:
load-module module-udev-detect tsched=0

save the file again with ctrl+o and exit with ctrl+x.

the patch is now applied. reboot your pc to apply the changes and go on with the guide e.e

OSU LAUNCHER:

we're almost done! the last thing to do is create a script to start the game.
to do that:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/
(if z: isn't your drive here, just search for the right one)

- type this to create the osu script:
cat > osu << "EOF"

- now paste in the terminal the following (always replacing username with yours):

#!/bin/sh

export STAGING_AUDIO_DURATION=5000
export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wine /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/osu\!.exe "$@"
EOF

- in the end launch these two commands.
sudo mv osu /usr/bin/
sudo chmod +x /usr/bin/osu

you can now launch your osu! by typing "osu" in the terminal!
to create a script to kill osu!, just in case it won't launch for any reason, let's do this:

- open the terminal and cd to your osu! folder (replace username with yours):
cd /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/

- type this to create the osukill script:
cat > osukill << "EOF"

- now paste in the terminal the following:

#!/bin/sh

export vblank_mode=0
export WINEARCH=win32
export WINEPREFIX=$HOME/.wine_osu
wineserver -k
EOF

- in the end launch again these two commands.
sudo mv osukill /usr/bin/
sudo chmod +x /usr/bin/osukill

you can now kill osu by typing osukill in the terminal when you need to

END
And that's it! Your osu! should now work perfectly fine!
Last but not least: you can also create a desktop shortcut for it, by left clicking on your desktop and selecting "create a launcher". It should look like this:



Well, that's the end of the guide! Thanks for reading, and have fun playing osu! on your linux <33

This is the maximum performance I got even using that configuration, Spec (2gb ram, 1.35ghz cpu, no graphic card)(Lubuntu 20.04 lts)

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

sudo apt-get update
sudo apt-get install libc6 build-essential

sudo apt-get upgrade

MarshNello wrote:

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

Assuming you're using Ubuntu (or anything Debian-based) you might fix installing these:

sudo apt-get update
sudo apt-get install libc6 build-essential

If it still doesn't work, you might just have to upgrade your system:

sudo apt-get upgrade

leny wrote:

MarshNello wrote:

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

Assuming you're using Ubuntu (or anything Debian-based) you might fix installing these:

sudo apt-get update
sudo apt-get install libc6 build-essential

If it still doesn't work, you might just have to upgrade your system:

sudo apt-get upgrade

Sadly did not do the trick (for me) but thanks for help

- sylvie - wrote:

Heya. I have stuff working pretty alright but there are still slight frame drops, and most notably, the framerate is capped at 144hz. How do I remedy this stuff. I am on Fedora 35 (wayland and pipewire lol)

K a r b o X wrote:

hey, i have a huge problem, i could not solve this, trying since last week (not jk). i can't start osu, it says "osu! was unable to obtain a graphics context. If this is the fisrt time you've seen this, please try restarting your PC." it is not the first time happening and idk what to do. When i click on "OK", osu pops up with "osu! crashed" telling that "OpenGL could not initialize.". I did every step of the instalation, wine, osu-wine, etc.

Following error.

#=zXgkpUpGWooUUAiSeA$2PQINAAvLf: No available GL context found. ---> OpenTK.Graphics.GraphicsContextException: Failed to initialize EGL, error NOT_INITIALIZED.
at OpenTK.Platform.Egl.EglWindowInfo..ctor(IntPtr handle, IntPtr display, IntPtr surface)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateWindowInfo(IAngleWindowInfoInternal window_info, Int32 major, GraphicsContextFlags flags)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateGLContext(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Boolean directRendering, Int32 major, Int32 minor, GraphicsContextFlags flags)
at OpenTK.Graphics.GraphicsContext..ctor(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Int32 major, Int32 minor, GraphicsContextFlags flags)
at #=zpDGDyz8NOUCZMTHvJseFwYRM_vID.#=zvP5cQlU=(Int32 #=zHaeeObY=, Int32 #=zE7$2IB4=, GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
--- End of inner exception stack trace ---
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.OnHandleCreated(EventArgs #=zFfm4ggA=)
at #=zLbmb8cFB3iFDJ6H8xbwAg313TvKd.OnHandleCreated(EventArgs #=zFfm4ggA=)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmCreate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at #=z6cA5tJtDC3Zha7QqOkNVjTQ=.WndProc(Message& #=zkhmiKZw=)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Specs.

CPU:
⠀Architecture: x86_64
⠀⠀CPU op-mode(s): 32-bit, 64-bit
⠀⠀Address sizes: 39 bits physical, 48 bits virtual
⠀⠀Byte Order: Little Endian
⠀CPU(s): 4
⠀⠀On-line CPU(s) list: 0-3
⠀Vendor ID: GenuineIntel
⠀⠀BIOS Vendor ID: Intel(R) Corporation
⠀⠀Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀BIOS Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀CPU family: 6
⠀⠀⠀Model: 78
⠀⠀⠀Thread(s) per core: 2
⠀⠀⠀Core(s) per socket: 2
⠀⠀⠀Socket(s): 1
⠀⠀⠀Stepping: 3
⠀⠀⠀CPU max MHz: 2000.0000
⠀⠀⠀CPU min MHz: 400.0000
⠀⠀⠀BogoMIPS: 3999.93
⠀Virtualization features:
⠀⠀Virtualization: VT-x
⠀Caches (sum of all):
⠀⠀L1d: 64 KiB (2 instances)
⠀⠀L1i: 64 KiB (2 instances)
⠀⠀L2: 512 KiB (2 instances)
⠀⠀L3: 3 MiB (1 instance)

Distro (ik its bad):
⠀No LSB modules are available.
⠀Distributor ID: Kali
⠀Description: Kali GNU/Linux Rolling
⠀Release: 2021.3
⠀Codename: kali-rolling

RAM: 4GB 2100Mhz
Disk: 120GB HD 79.09GB free (linux partition)

yes, i have "libgl" packages installed, and i found out some forum that says that i need gpu drivers but i don't find any Intel ones, yea. Because of my distro i don't want to install Ubuntu dependencies or Debian 9 ones, and i can't install "wine32", because when i try to install, says i need to remove every single package that i already have, including xserver, xfce, Xorg, burpsuite, etc. (not kidding tho, everything). i tried doing it on a virtual machine and that sh*t crashed and gdm3 and Xorg don't work anymore, even installing it after. my distro uses Debian Sid packages for those who don't know, any packages from Debian 9+ might work tho. i gave up because i don't want to crash anything in my computer and deal with bigger problems, if anyone have a solution that might work that don't work with too much danger, im down. im not used to write in english, sorry for any english mistakes. and yes i live in brazil.

MarshNello wrote:

K a r b o X wrote:

hey, i have a huge problem, i could not solve this, trying since last week (not jk). i can't start osu, it says "osu! was unable to obtain a graphics context. If this is the fisrt time you've seen this, please try restarting your PC." it is not the first time happening and idk what to do. When i click on "OK", osu pops up with "osu! crashed" telling that "OpenGL could not initialize.". I did every step of the instalation, wine, osu-wine, etc.

Following error.

#=zXgkpUpGWooUUAiSeA$2PQINAAvLf: No available GL context found. ---> OpenTK.Graphics.GraphicsContextException: Failed to initialize EGL, error NOT_INITIALIZED.
at OpenTK.Platform.Egl.EglWindowInfo..ctor(IntPtr handle, IntPtr display, IntPtr surface)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateWindowInfo(IAngleWindowInfoInternal window_info, Int32 major, GraphicsContextFlags flags)
at OpenTK.Platform.Egl.EglAnglePlatformFactory.CreateGLContext(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Boolean directRendering, Int32 major, Int32 minor, GraphicsContextFlags flags)
at OpenTK.Graphics.GraphicsContext..ctor(GraphicsMode mode, IWindowInfo window, IGraphicsContext shareContext, Int32 major, Int32 minor, GraphicsContextFlags flags)
at #=zpDGDyz8NOUCZMTHvJseFwYRM_vID.#=zvP5cQlU=(Int32 #=zHaeeObY=, Int32 #=zE7$2IB4=, GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
--- End of inner exception stack trace ---
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.#=z2ScCYgGWRUpd(GraphicsContextFlags #=z2m_Rw6E=)
at #=zYm$nQntjAjjS8P6PkduxT4w=.OnHandleCreated(EventArgs #=zFfm4ggA=)
at #=zLbmb8cFB3iFDJ6H8xbwAg313TvKd.OnHandleCreated(EventArgs #=zFfm4ggA=)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmCreate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at #=z6cA5tJtDC3Zha7QqOkNVjTQ=.WndProc(Message& #=zkhmiKZw=)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Specs.

CPU:
⠀Architecture: x86_64
⠀⠀CPU op-mode(s): 32-bit, 64-bit
⠀⠀Address sizes: 39 bits physical, 48 bits virtual
⠀⠀Byte Order: Little Endian
⠀CPU(s): 4
⠀⠀On-line CPU(s) list: 0-3
⠀Vendor ID: GenuineIntel
⠀⠀BIOS Vendor ID: Intel(R) Corporation
⠀⠀Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀BIOS Model name: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
⠀⠀⠀CPU family: 6
⠀⠀⠀Model: 78
⠀⠀⠀Thread(s) per core: 2
⠀⠀⠀Core(s) per socket: 2
⠀⠀⠀Socket(s): 1
⠀⠀⠀Stepping: 3
⠀⠀⠀CPU max MHz: 2000.0000
⠀⠀⠀CPU min MHz: 400.0000
⠀⠀⠀BogoMIPS: 3999.93
⠀Virtualization features:
⠀⠀Virtualization: VT-x
⠀Caches (sum of all):
⠀⠀L1d: 64 KiB (2 instances)
⠀⠀L1i: 64 KiB (2 instances)
⠀⠀L2: 512 KiB (2 instances)
⠀⠀L3: 3 MiB (1 instance)

Distro (ik its bad):
⠀No LSB modules are available.
⠀Distributor ID: Kali
⠀Description: Kali GNU/Linux Rolling
⠀Release: 2021.3
⠀Codename: kali-rolling

RAM: 4GB 2100Mhz
Disk: 120GB HD 79.09GB free (linux partition)

yes, i have "libgl" packages installed, and i found out some forum that says that i need gpu drivers but i don't find any Intel ones, yea. Because of my distro i don't want to install Ubuntu dependencies or Debian 9 ones, and i can't install "wine32", because when i try to install, says i need to remove every single package that i already have, including xserver, xfce, Xorg, burpsuite, etc. (not kidding tho, everything). i tried doing it on a virtual machine and that sh*t crashed and gdm3 and Xorg don't work anymore, even installing it after. my distro uses Debian Sid packages for those who don't know, any packages from Debian 9+ might work tho. i gave up because i don't want to crash anything in my computer and deal with bigger problems, if anyone have a solution that might work that don't work with too much danger, im down. im not used to write in english, sorry for any english mistakes. and yes i live in brazil.

I've never really used Kali myself but you might try installing this (?) https://installlion.com/kali/kali/main/i/intel-gpu-tools/install/index.html

MarshNello wrote:

leny wrote:

MarshNello wrote:

vat_3046 wrote:

leny wrote:

I'm having trouble running osu! after installing the wine-osu 6.14 package (it launched successfully before)

ERROR: ld.so: object '/usr/$LIB/libgamemodeauto.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /home/leny/.local/share/lutris/runners/wine/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)

linux newbie here, any help?

Was a solution found? I am having a very similar problem:
wine: could not load ntdll.so: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /opt/wine-osu/bin/../lib32/wine/i386-unix/ntdll.so)
osu! ran once for me as well.
Another Linux newbie here.

Assuming you're using Ubuntu (or anything Debian-based) you might fix installing these:

sudo apt-get update
sudo apt-get install libc6 build-essential

If it still doesn't work, you might just have to upgrade your system:

sudo apt-get upgrade

Sadly did not do the trick (for me) but thanks for help

Update: check the troubleshooting box e.e

MarshNello wrote:

- sylvie - wrote:

Heya. I have stuff working pretty alright but there are still slight frame drops, and most notably, the framerate is capped at 144hz. How do I remedy this stuff. I am on Fedora 35 (wayland and pipewire lol)

Sooo first of all: I assume you have a 240hz monitor, but Wine should detect the same refresh rate of the system, so the issue might be your drivers or some dependency (?) I've never really used Wayland myself so xd

Try updating your drivers or installing all the Wine dependencies listed here:

Fedora dependencies

sudo dnf install alsa-plugins-pulseaudio.i686 glibc-devel.i686 glibc-devel libgcc.i686 libX11-devel.i686 freetype-devel.i686 libXcursor-devel.i686 libXi-devel.i686 libXext-devel.i686 libXxf86vm-devel.i686 libXrandr-devel.i686 libXinerama-devel.i686 mesa-libGLU-devel.i686 mesa-libOSMesa-devel.i686 libXrender-devel.i686 libpcap-devel.i686 ncurses-devel.i686 libzip-devel.i686 lcms2-devel.i686 zlib-devel.i686 libv4l-devel.i686 libgphoto2-devel.i686 cups-devel.i686 libxml2-devel.i686 openldap-devel.i686 libxslt-devel.i686 gnutls-devel.i686 libpng-devel.i686 flac-libs.i686 json-c.i686 libICE.i686 libSM.i686 libXtst.i686 libasyncns.i686 liberation-narrow-fonts.noarch libieee1284.i686 libogg.i686 libsndfile.i686 libuuid.i686 libva.i686 libvorbis.i686 libwayland-client.i686 libwayland-server.i686 llvm-libs.i686 mesa-dri-drivers.i686 mesa-filesystem.i686 mesa-libEGL.i686 mesa-libgbm.i686 nss-mdns.i686 ocl-icd.i686 pulseaudio-libs.i686 sane-backends-libs.i686 tcp_wrappers-libs.i686 unixODBC.i686 samba-common-tools.x86_64 samba-libs.x86_64 samba-winbind.x86_64 samba-winbind-clients.x86_64 samba-winbind-modules.x86_64 mesa-libGL-devel.i686 fontconfig-devel.i686 libXcomposite-devel.i686 libtiff-devel.i686 openal-soft-devel.i686 mesa-libOpenCL-devel.i686 opencl-utils-devel.i686 alsa-lib-devel.i686 gsm-devel.i686 libjpeg-turbo-devel.i686 pulseaudio-libs-devel.i686 pulseaudio-libs-devel gtk3-devel.i686 libattr-devel.i686 libva-devel.i686 libexif-devel.i686 libexif.i686 glib2-devel.i686 mpg123-devel.i686 mpg123-devel.x86_64 libcom_err-devel.i686 libcom_err-devel.x86_64 libFAudio-devel.i686 libFAudio-devel.x86_64
sudo dnf groupinstall "C Development Tools and Libraries"
sudo dnf groupinstall "Development Tools"

BoofMonke wrote:

Hi, i've recently installed osu and im using wine-staging because I've had better experience with that on this particular guide, but it seems my latency is all over the place. I've tried 0 universal offset, 25 and even -25. I've tried enabling and disabling compatibility mode, even using the pipewire settings in the Extra info section but it just doesnt seem right. Any idea how to fix it?

I'm running arch.

Also the tablet delay is unbearable even with the compositor disabled, any idea? OpenTabletDriver isn't the issue as it runs fine on the desktop.

MarshNello wrote:

Liang J wrote:

is there a way to move my songs from windows to Linux?, i tried to move it directly but the game dosent recognize it

you just need to paste your Windows' "Songs" folder to your Linux's osu! directory (which should be around here /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/)

after that just refresh your maps in osu! pressing F5 and you're good

Ashtrath wrote:

MarshNello wrote:

Liang J wrote:

is there a way to move my songs from windows to Linux?, i tried to move it directly but the game dosent recognize it

you just need to paste your Windows' "Songs" folder to your Linux's osu! directory (which should be around here /home/username/.wine_osu/dosdevices/z:/home/username/Downloads/)

after that just refresh your maps in osu! pressing F5 and you're good

where i can find the .wine_osu folders i only have .wine folders, or its the same? its not on my home directory for some reason, im using arch if that matters.

also i dont have much resolution option compared to the windows one, like i don't have 720p resolution option.

spunout enjoyer wrote:

i was looking around to optimize games and i found gamemode. it really did smoothen my osu so i decided to share it with you.

1-) install gamemode:

arch

sudo pacman -S gamemode lib32-gamemode

ubuntu

sudo apt install gamemode

2-) use gamemoderun ./game (gamemoderun osu-wine in this case) if you are starting the game from terminal, if you are starting the game from .desktop file you need to add gamemoderun into command line like this.

------optional step for lutris games------
if you play your games on lutris you can enable this by default which can save you lot of time

steps

KatouMegumi wrote:

Gamemode may not help in some cases. It could make it worse too, so try it and see.

MarshNello wrote:

KatouMegumi wrote:

Gamemode may not help in some cases. It could make it worse too, so try it and see.

Really? I got better performance on like 3 pcs so I thought it was good xd
I'll add that to its section e.e

Kolmas wrote:

looks fps on wayland is locked to refresh rate of the screen, it's running fine on X11 tho
also it's probably my problem but idk why i can't get opentabletdriver to work unless using sudo

systemctl --user enable opentabletdriver --now

kotik0666 wrote:

Please make guide for VOID LINUX