DeadlySin9 wrote:

I hope two months from last post isn't too old to bump? But anyways, the OP has been updated with some new links and one piece of advice: run as administrator! That may help with a few of your problems.

Danthepatrick wrote:

I am confused. I am running Windows 7 EcoTUIODriver and tuioDriod on a Samsung Tab 4. It says it takes the input on the computer but for some reason when I start Osu there is no response. Help?

Try enabling OS TabletPC in the settings. I also had Raw Input enabled and it still worked.

xEkin wrote:

Does it work with Mac Too?? If yes HOW ? bcs the driver is not for mac

I just updated the OP with a possible Mac app to let you use this.

How Do You Do This? I Tried Everything And Nothing is Working like what kind of ip address? im so confused.

im really confused if you may add me on steam so we could get a voice communication i feel it would be easiest steam (Kiko) my profile picture is a cat duck

is there a way i can turn the sensitivity up so its faster ??

Weird. I installed the drivers on Windows Vista,and it worked, BUT you cant use in in osu! nor in Windows itself. It only works on the utility.

How do I fix this?

hello i was using this for a few days touch proxy on windows 8.1 and tuiopad but now the cursor just laggs all over the place and keeps frezzing on my desktop any help pls

Can it be Considered?

umm idk why but at TUOIdroid the settings page never opens what do ido?

mikus111 wrote:

umm idk why but at TUOIdroid the settings page never opens what do ido?

Do you have a Samsung product? If so then hold down the back key.

ummm im sorry but i dont know how to 'actually" do this so if ever you are kind enough to tell me how. then please please do. i just started playing about a week ago.

So.. it works, but it is werry laggy and inconsitant... I would not reccomend this.

i don't fcking understand this shit. ! Pls Make a video !

I have a bit of a problem...It wont work...
I got the port at 3333.
I obviously wont give the IP adress,but it goes after "127.0.0.1"
And its at UDP.
I also turned Service on...but it doesn't seem to work
(Extra stuff if its neccecary,PC,Windows 10,using TouchProxy,opened with Admin,iPad mini 2 with TUIOpad...
Help please?

MY QUESTION IS 1.

WHY MOUSE POINT IS DOESN"T MOVE?

how do i open the options on android

So, following everything for iOS, ecoTUIOdrivers are set up, tuiopad works.

BUT IT CAN ONLY DETECT MY PAD IF IM ON THE CONFIG UTILITY. HOW TO FIX???

Everything is working fine ecept i cant hit Z and X to click

tokaku wrote:

I probably sound really dumb right now but, how did you know whats your ip address? I've used remotedroid before with the server telling me what the ip address was. I tried using the ip addresses on the online checking websites.they didnt work. what do i do?

run CMD. Type ipconfig. It needs the computer ip not the internet's nor the wifi's.

Ok after like two hours I finally got it workin but its going backwards T-T help im using ios and windows 7

hi so I'm trying this with my ipad mini 2. I downloaded the app and downloaded the touchproxy. followed the directions but my ipad still won't work.
I'm running ios version9.3.1 and windows 8.1

-

-

It Keeps Saying "client not reachable" I Turned Off Firewall And I Filled All The Spaces. And I Cannot Connect Not Even On The Preview Screen

My computer is on windows 10. Does it still work?

Will this work on windows 2000???? Urgent help needed!!

i see it read the movment on the box in the program EcoTUIODriver but it dosnt read on osu.
what should i do

Hy Iam a bit lost but how can u run the toucproxy I have no idea where to click
Btw Iam running win8.1

12rey86 wrote:

My computer is on windows 10. Does it still work?

Yes it does. I used ecoTUIO and TUIOdroid and it worked. Sadly, I can't use the left click and I don't know why.

shaked0147 wrote:

i see it read the movment on the box in the program EcoTUIODriver but it dosnt read on osu.
what should i do

Try hitting the "Toggle start/stop service" button if you're using EcoTUIO.

This is a very strange and cool idea!

[deleted]

Doesn't work at all.

"Adding Displays
Adding Touch sensor for every Display
listening to TUIO messages at port 3333
listening to TUIO messages at port 3334
listening to TUIO messages at port 3335
listening to TUIO messages at port 3336
listening to TUIO messages at port 3337
0 >-1920 0 0 -1920 1040 0
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3333
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3334
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3335
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3336
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3337
Toggle Service button clicked
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3333
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
Starting the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Running.
test 8
Starting the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Running.
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3334
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3335
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3336
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3337
Starting the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Running.
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3334
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3335
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3336
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3337
Toggle Service button clicked
Stopping the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Stopped.
listening to TUIO messages at port 3333"

I got it to work, but it is really weird for playing osu! with, you kinda have to tap before the note actually hits because of the constant mouse click, is there a way to fix it?

fireball0902 wrote:

I got it to work, but it is really weird for playing osu! with, you kinda have to tap before the note actually hits because of the constant mouse click, is there a way to fix it?

Disable mouse buttons in game for it. I think f10 will do it temporarily, but there is an option to disable mouse buttons, specifically for those with tablets

It says that im connected with all and it seems okay,but i dont see the live feedback and either the osu responds or anything,im running on windows 7,Please help me ;-;

how do i get tosetting on andriod
???

is there anywhere i can find a COMPLETE WALKTHROUGH of this? i cant seem to get it to work at all

how do get it to register as mouse because its not doing anything

How do I get this on my desktop? I have it on my ipad.

xJhill wrote:

How do I get this on my desktop? I have it on my ipad.

Haven't you read the OP properly? Don't want to sound rude...


For Android I used Unified Remote
As a controller for my mouse, though it has some input lag.
If you want to use it like a tablet, you need to have a phone that supports a pen like iPad Pro or the Samsung Note
Otherwise you'll have to use your fingers.

Here's the app for Android https://play.google.com/store/apps/deta ... ech.Remote

I pressed start but nothing happened

thats just great, i was dooing same method but with diffrent apps, that didnt provide me a stable connection (even with wifi 3.ghz core, it was based on lan connection) and it chokes a lot. now its a lot beter, thanks!

I don't know what I'm doing




I should probably just buy a osu! tablet though.

another stupid question
how the hell do i open the pc app

poisoneedhope wrote:

another stupid question
how the hell do i open the pc app

Double click on TouchProxy application maybe?

Its all good, but delay on my phone is making me kill myself

what if i have an ipv6 address?

Wow it works.

Is this how it feels to use a tablet?

ItsSurreal wrote:

what if i have an ipv6 address?

If it doesn't let you enter your ipv6 address, then you'll either have to manually assign one or create a hosted network for them to connect to each other on.

SilverHawk21 wrote:

Wow it works.

Is this how it feels to use a tablet?

An actual tablet is a bit nicer, since you can configure the area of the screen you use and you don't have to keep contact with the tablet surface for it to register. But as far as pointing and being able to zip about easier, yeah.

for anyone who want to use a galaxy note device to play osu! check out my profile

i will test it if it don't work let me send another message

I know that I'm late to this topic, but do you have to port forward in order to connect your PC and your Tablet?

umm.. i cant play, when i play with touchproxy the z and x doesnt work. any solution? im on w10 btw

Ruhe wrote:

it worked its just that its a bit slower or im not used to it lol.

EDIT : Using finger is damn weird man and it doesn't respond that fast ;-;

Just make some pen stylus homemade,
you can watch it on youtube,

Andrew Heo wrote:

mikus111 wrote:

umm idk why but at TUOIdroid the settings page never opens what do ido?

Do you have a Samsung product? If so then hold down the back key.

You... sir... ARE MY SAVIOUR!!!!!

how to prevent from clicking?

Akitaris wrote:

I know that I'm late to this topic, but do you have to port forward in order to connect your PC and your Tablet?

Late reply but no.

Mordic wrote:

umm.. i cant play dud, when i play with touchproxy the z and x doesnt work.. any solution? im on w10 btw

Rektygon wrote:

how to prevent from clicking?

Try setting Ignore Mouse Buttons During Gameplay to on for both of those. Also check your key bindings.

No matter how hard I try, I can't get this to work. I have my firewall completely off (I never have it on), I've tried every IP I could find, I've switched ports, restarted my computer, used the different programs, run in administrator, yet NOTHING works. The client isn't receiving anything.

not working

Somebody found a way to resize area? :p

how to you exit the app via mobile without forcequitting it? and it still won't connect to my PC.

client not reachable,,, halp

Is there a way I can make my iPad not click aswell?


Edit: nvm i found out that i can turn it off ingame

how do you get to the settings? im on android Note 4

U shoudlnt be using ur android or ios cuz sometimes it wont sensor ur screen and the touch so if you hover over it

bro how do i get the sensativiy up ?

Now still i client is not reachable////

how do i make the input count as hovering and not clicking?

noahahaa wrote:

how do i make the input count as hovering and not clicking?

F10 Disable mouse clicking

Windows 10? Sorry I'm late, I just wanna try this out

Does this still work?
if so what if i use an Ethernet cable instead of wifi

Twych wrote:

Does this still work?
if so what if i use an Ethernet cable instead of wifi

It does.
Using Ethernet can be a lot more reliable than wifi, but it still rely by forwarding of router, especially on heavy load. One second lag would throw you into hell.

I'm using Mac+iPad+Pencil to make it actually playable, by transmitting via lightning cable, but it has a long list of requirement which makes it pretty complicated.

works fine though, problem is the cursor is so slow and it automatically clicks every time i move it. :T are there any ways to fix this? tyia ^^

xAshurix wrote:

works fine though, problem is the cursor is so slow and it automatically clicks every time i move it. :T are there any ways to fix this? tyia ^^

Raw input on, map absolute to screen on, sensitivity 4x+, disable mouse button

DeadlySin9 wrote:

This post has been updated as of Oct. 27, 2015! All methods should still work, I've tested everything except the iOS app on Windows 7.

If you have problems, try running the desktop server as administrator!

So I've been using this while waiting to be able to get a real tablet. This allows you to use any iOS or Android device that can install the app as an absolute tablet style controller.

Video:


Requirements:
1) PC running Windows 7 or higher.
2) Either TouchProxy (Windows 8/8.1 only) or EcoTUIODriver (works on Win7, but I couldn't get it working on windows 8)
Mac: Try Tongseng, I've not tested it as I don't have any Macs.
3) Apps -
Android: tuioDroid
iOS: TuioPad

4) OPTIONAL - A stylus. You can just use your fingers but that just seems weird to me. I'm using a Targa Slim stylus i got at Best Buy.

First off, install the Desktop and Mobile app that works with what you have (good luck getting tuiopad on Android otherwise).
Open up the desktop app to make sure it configures, and check the port it is set to.
NOTE: It may help to run as administrator. I got this working on Windows 10, but not until I ran it as admin.
Next, on your mobile device open the TUIO app and enter your computer's local IP address and the port.
Then just turn on the service from the desktop app and you have touch control! It registers as if you were touching on a Tablet PC, so it's like continuously holding down the mouse.
Remember to set osu! to use a mouse sensitivity of 1 or the cursor will spaz endlessly.

Pictures:

iOS App

Android App(Settings Page)

TouchProxy

ecoTUIO

mind to ask, after i done everything the sensor still cannot work why??\

Hey Umm very cool idea but is there a way you can run this on Windows 10?

i would like to know how do you enter the port and local id on tuiodroid

I use windows 10, so I don't really get what application for that since all you shared was for Windows 7/8 and 8.1

Jolene wrote:

I probably sound really dumb right now but, how did you know whats your ip address? I've used remotedroid before with the server telling me what the ip address was. I tried using the ip addresses on the online checking websites.they didnt work. what do i do?

head over to command prompt and type ipconfig ( just realise this was 5 years ago just reply for fun )

Gottsmillk wrote:

Doesnt seem to work for me. Running Windows 8.1, ports successfully connect, everything works fine, only problem is that when it connects it only works for about 1 second then disconnects and says on the Android device "Client not reachable". After repeating the process and randomly tapping during the one second it works, it processes and a green dot appears in the TouchProxy program, but the mouse gets stuck there after it disconnects and says "Client not reachable". Having to alt+F4 to exit TouchProxy after that happens.

same problem for me

where the f**k do i put my local ip and port on the androi app


edit:i get it to work now but when i turn it on it doesnt work... help.

umm i don't get how to do any of this can someone explain it to me?
step by step i you can please cause i'm an idiot who lives under the rock

EDIT:it's working now but i can't use my left click button in the keyboard how do you disable this?

There is a another app called VirtualTablet for Android that can be connected with both Wi-Fi, Bluetooth and even USB, which 95% of the times super accurate and lagless. I used it myself for the longest 1 months without a issue.

h

"Adding Displays
Adding Touch sensor for every Display
listening to TUIO messages at port 3333
listening to TUIO messages at port 3334
listening to TUIO messages at port 3335
listening to TUIO messages at port 3336
listening to TUIO messages at port 3337
0 >-1920 0 0 -1920 1040 0
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3333
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3334
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3335
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3336
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3337
Toggle Service button clicked
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3333
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
Starting the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Running.
test 8
Starting the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Running.
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3334
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3335
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3336
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3337
Starting the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Running.
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3334
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3335
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3336
A blocking operation was interrupted by a call to WSACancelBlockingCall
null packet
listening to TUIO messages at port 3337
Toggle Service button clicked
Stopping the Tuio-To-vmulti-Device1 service...
The Tuio-To-vmulti-Device1 service status is now set to Stopped.
listening to TUIO messages at port 3333"

I got that problem. Please help!

Jolene wrote:

I probably sound really dumb right now but, how did you know whats your ip address? I've used remotedroid before with the server telling me what the ip address was. I tried using the ip addresses on the online checking websites.they didnt work. what do i do?

[img:1337][/img:1337]

You can google ip and google will show you ur ip

Jolene wrote:

I probably sound really dumb right now but, how did you know whats your ip address? I've used remotedroid before with the server telling me what the ip address was. I tried using the ip addresses on the online checking websites.they didnt work. what do i do?

On your computer hold Windows+R then type cmd and press enter.
Once you've done that type ipconfig into the window and press enter.

You should find your ip address to the right of where it says 'IPv4 Address'

does the phone have to be connected to the pc with a cable i did all the steps and it doesnt work

SENPAI6EX9INE wrote:

does the phone have to be connected to the pc with a cable i did all the steps and it doesnt work

That didn't use to be the case, but this thread was made years ago, so the program may have stopped working at one point or another.

plesss help me my laptop cant download this app ;-;
OR AM I JUST DUMB FOR THIS

osuiii sky wrote:

plesss help me my laptop cant download this app ;-;
OR AM I JUST DUMB FOR THIS

What operating system do you use?

Pls help! it lagged every single time when im playing, how do i fix this?

ItsYards15 wrote:

Pls help! it lagged every single time when im playing, how do i fix this?

What do you mean by lagging? Is it not responding for a period of time, or is there a delay between when you move your fingers and the game processes it?

Hi im using my Galaxy S10 for this but when I continuously slide my finger there's a brake, like this:

----------------------- -------------------------------------------- ------------------------------ --------

Above is a example of what happens. I thought that was a problem with connection, but those brakes are like a pattern, almost the same hiatus between brakes. I have a internet of 120giga. The problem is the router? If yes, there's a way to use USB?

AsuraEmperor wrote:

Hi im using my Galaxy S10 for this but when I continuously slide my finger there's a brake, like this:

----------------------- -------------------------------------------- ------------------------------ --------

Above is a example of what happens. I thought that was a problem with connection, but those brakes are like a pattern, almost the same hiatus between brakes. I have a internet of 120giga. The problem is the router? If yes, there's a way to use USB?

The problem would not be your router at all. I wouldn't know what the problem is exactly, but I know for a fact it wouldn't be your router. If anything, it would be the processing power on your computer not quite being fast enough to keep up with the constant inputs. Do the breaks last for any significant amount of time? (significant meaning half a second or more)

how can i download it on my pc bcs i cant find the app

denyx wrote:

how can i download it on my pc bcs i cant find the app

Click the links in the original post, it should bring you right to the apps

cant find the tuiopad on my iphone for sum reason

Bonnie1356 wrote:

cant find the tuiopad on my iphone for sum reason

It could very well have been removed from the app store by Apple. I do know the app is still available for android, but I cannot confirm for Iphone users because I don't own an Iphone.

I got it all working but the sensitivity is too low? and the area doesnt even reach to the edge of my com

ok so i was struggling then i changed the port from 3333 to 333 pressed start went to my pc did the same with the port then pressed the button to start and it connected