forum

Antecer's osu!keypad RGB

posted
Total Posts
107
show more
Rexyne
Black keypad's out of stock D: xD May consider buying one when black variant is back in stock, also the keypad looks very cool!
crackhead
Loving the keypad Antecer, but is there any way to fix the brown switches from double clicking? As far as I can tell they are the only ones that have this problem, i'm using the reds for now but would like to swap back if you can give me a solution
Paneiru

MAUXY wrote:

Loving the keypad Antecer, but is there any way to fix the brown switches from double clicking? As far as I can tell they are the only ones that have this problem, i'm using the reds for now but would like to swap back if you can give me a solution
If you haven't tried it already, try downloading the antecer software and change the key debounce value which is set to 5 on default. Because the key will slightly bounce when you click it down, it will produce multiple signals. Changing the key debouncing ensures that only one digital signal can be registered within the space of given time. In this case the value is probable set in milliseconds, so maybe try increasing it.
crackhead

Paneiru wrote:

MAUXY wrote:

Loving the keypad Antecer, but is there any way to fix the brown switches from double clicking? As far as I can tell they are the only ones that have this problem, i'm using the reds for now but would like to swap back if you can give me a solution


If you haven't tried it already, try downloading the antecer software and change the key debounce value which is set to 5 on default. Because the key will slightly bounce when you click it down, it will produce multiple signals. Changing the key debouncing ensures that only one digital signal can be registered within the space of given time. In this case the value is probable set in milliseconds, so maybe try increasing it.

Wow that was quite a simple solution huh? Thank you so much, seems to be working fine now :)
Topic Starter
Antecer
@Tech_Gamer21 @MAUXY
I am sorry for this situation, maybe this is due to a failure caused by the copper holes not being in close contact.
I think the contacts can be made tighter by adjusting the shrapnel in the copper hole or by welding the shaft to the PCB.
cynaax
Thank you for the reply, I might try the whole debounce level method and if not then I might try the method you gave me
FondyBoi
Hey, i know this thread is pretty old, but Im not sure where else to ask this, ive bought this and when i plugged it in and got everything downloaded and working, it seems to make my tablet cursor jitter and shake uncontrollably, making the game unplayable, Does anyone know any way i might be able to stop this?
it only happens when osu is open.
crackhead

Somtam wrote:

Hey, i know this thread is pretty old, but Im not sure where else to ask this, ive bought this and when i plugged it in and got everything downloaded and working, it seems to make my tablet cursor jitter and shake uncontrollably, making the game unplayable, Does anyone know any way i might be able to stop this?
it only happens when osu is open.

Try different drivers for your tablet, google Hawku's tablet drivers they work great. Also what tablet are you using?
SpookyStan
I ordered it and it keeps doubletapping with every switch. Not only that, it flashes colours every 3/5 seconds like it loses connection and gains it again. I gave up on it for 2 months, but now I tried the new drivers, and none of them actually see my keypad. When the old drivers were working (about 2 months ago) I tried every debouce level up until 200... So far I am not very pleased with this keypad, can anyone help me? :v

Pic for no device link: https://puu.sh/AAeTG/686c659092.png

Video of the connection thing: https://www.youtube.com/watch?v=8lFJ4Z_TOvM
Paneiru

LoliRafis0108 wrote:

I ordered it and it keeps doubletapping with every switch. Not only that, it flashes colours every 3/5 seconds like it loses connection and gains it again. I gave up on it for 2 months, but now I tried the new drivers, and none of them actually see my keypad. When the old drivers were working (about 2 months ago) I tried every debouce level up until 200... So far I am not very pleased with this keypad, can anyone help me? :v

Pic for no device link: https://puu.sh/AAeTG/686c659092.png

Video of the connection thing: https://www.youtube.com/watch?v=8lFJ4Z_TOvM
I had a similar problem with the "No Device Link!" and figured out the cable was bad, so I just switched out the cable and didn't encounter the problem after that. If not, then you could always send Antecer an email and he might be kind enough to send you a new working device.
DfAk3R
Hi i am experiencing multiple presses registered when only pressed once when using the keypad any fix?
Paneiru

DfAk3R wrote:

Hi i am experiencing multiple presses registered when only pressed once when using the keypad any fix?
If you check earlier posts in this thread, you can see I answered someone else with a similar question, just look it up. If you're too lazy to even search for it tl;dr increase debounce value
Icebirb
bottom text
Zetako
Do you make a keypad that is suitable for people who play with their ring finger and index finger?
kiran

DfAk3R wrote:

Hi i am experiencing multiple presses registered when only pressed once when using the keypad any fix?


Change labelDebounce to 50 or higher.
ZhuyanMK1
Hi. I currently use a Mac for and really want the keypad that you have. I'm just not quite sure if the software customizing the keypad will work on Mac, if not are there any alternatives? I'm not very familiar with coding and very complicated computer things so it would be very good to have something that will work easily on Mac. Thanks!
zoklev
I bought all the switches and I recognize the blue, red, brown, and black switches. But what’s the last one? Is that speed silver?
Rexyne

zoklev wrote:

I bought all the switches and I recognize the blue, red, brown, and black switches. But what’s the last one? Is that speed silver?

Yes, its's Speed/ Silver
wafflecowman
I ordered the keypad on august 23. and it said it would be shipped out by september, yet it hasn't come yet, does anybody know why?
DXPOHIHIHI
Why would anyone buy a keypad that's worth 34$ that only has 2 keys when I could buy a cheaper keyboard that has all keys?
RamenBucket

szkiller wrote:

Why would anyone buy a keypad that's worth 34$ that only has 2 keys when I could buy a cheaper keyboard that has all keys?

To piss you off

Also if you buy the 38$ one you get 5 different switch types so you don't have to by individual keyboards to try them out.

wafflecowman wrote:

I ordered the keypad on august 23. and it said it would be shipped out by september, yet it hasn't come yet, does anybody know why?

Shipped out means that it has been mailed out, not arrived at your home. It is probably on it's way to you right now.
wafflecowman
ok thanks
PaintedKoala
double tapped after 3 months and forgot to edit
YTKarton
I bought it and did not get a keyboard. money is not returned
ClearFail
gl_moon
Hi, Can we use two for mania?
Ittiphat
Will plug and play work?
I use mac and still decided about buying or not
Kossa
what keypad is better the nono osu keypad or the amusing keypad idk which to buy
-SnZ-

szkiller wrote:

Why would anyone buy a keypad that's worth 34$ that only has 2 keys when I could buy a cheaper keyboard that has all keys?


Because I'm fine with paying for somebody's good work.
Rexyne

TapThatL-OsU wrote:

what keypad is better the nono osu keypad or the amusing keypad idk which to buy


Osu! Nono keypad is discontinued a long time ago. Only "Chinese" Versions exist now. '""' because I don't even know where PPY got theirs from. Amusing keypad still exists and is available for purchase.
Both perform similarly. I'd suggest getting Antecer's one though because there's software for the lights and debounce I think
Mikadini
Is the product still on sale? (Italy) could I have more information about shipping times?
fruity
Topic Starter
Antecer

Mikadini wrote:

Is the product still on sale? (Italy) could I have more information about shipping times?
Yes, it is still on sale and is constantly being upgraded!
You can see here: https://antecer.com


fruity wrote:

Are there any shipping fees to Australia via your website?
The cost will include shipping, you don't need to pay the freight separately.
BBerN
I have two questions,what's the latency (hz) and does it ship to Brasil?
f o f o
I bought mine in December and it's already broken.
if I press and release a key once it sometimes thinks that the key is still pressed or that I'm pressing the other key at the same time.
Overall I think the keypad is just not able to correctly read which key I am pressing anymore.
Since it's pretty expensive for a two-key keypad I'm sad to see it broke so fast.
Please sign in to reply.

New reply