thnikk's Osu! Keypads [Development]

posted
Total Posts
582
show more
SmallerMoonstar

The Gambler wrote:

SmallerMoonstar wrote:

Yeah, not very good with keyboard terminology, so I kinda don't know this stuff :P But I meant if the keyboard could do something similar to the demonstration in the video
*Deep breath*

If you're a regular on this forum, you might be able to know what we are talking about. In any case, give this site a look.
So from my understanding, and what you said, I can effectively "swap out" the switches by taking out the springs and such on the nono keyboard but not the entire switch itself? Also, does this mean that Thnikk's keyboard allows for the swapping of entire switches? If that's what happens when a keyboard is handwired. I was planning to get either the hnikk's keyboard and switch out the switches for Cherry MX Browns since he doesn't have it as an option.
ZenithPhantasm
It doesnt really matter if you swap it by popping the covers or SIP given every MX clone has the same exact housing other than color and material.
Topic Starter
Thnikk
Update 1/18/16

GUH, LOTS OF ORDERS. TRYING TO MAKE NEW RGB KEYPAD. NEW ANIME SEASON. DYING.

Keypads will be back up on Wednesday.


Switches can't be fully removed without soldering and you currently would have to remove the hotglue (very easy with rubbing alcohol) to open the switches, but I'm working on a way around this to make the same solution used on the nono keyboard available on my keypads. Expect to see it when the r3 RGB(W) keypad comes out ;)
ZenithPhantasm
Or better yet. You could 3D print custom housing that are easily removable without the need of special tools.
XDD
I want to get one of these, however, I want to know what everyone thinks about 125hz polling rate. That's an 8 millisecond delay. Is that a significant delay if I'm aiming to get to a really high rank?

I can't really afford any of the 1000hz ones (LED, RGB models). They cost 70 dollars including shipping as I'm from Australia and that's just a bit too much for two buttons.
KanoSet

XDD wrote:

I want to get one of these, however, I want to know what everyone thinks about 125hz polling rate. That's an 8 millisecond delay. Is that a significant delay if I'm aiming to get to a really high rank?

I can't really afford any of the 1000hz ones (LED, RGB models). They cost 70 dollars including shipping as I'm from Australia and that's just a bit too much for two buttons.
add few bucks and get a full mech keyboard from a local store.. it's a way better option
cooler master storm is the way to go
XDD
Does anyone here happen to know the polling rate of the official osu! nono keyboard?
KanoSet

XDD wrote:

Does anyone here happen to know the polling rate of the official osu! nono keyboard?
nope, sadly
totekingsg1
Got mine at home like 30min ago, and I'm already playing with it.

People complains about the polling rate. Do I actually feel any kind of lag? No, I don't. It feels exactly as my mech kb, except that my kb has blue switches, which are noisy as fuck. It is pretty comfortable since it is 10 times smaller than a kb, so I can place my hand much better.

I could chose between different switches, and decided to go for the Cherry MX red. It comes with 2 o-rings included on every key, which make the keys pretty silent.

U don't need to configure anything, u just plug in the keypad into the usb and it works properly. The default binded keys seem to be Z and X, and ESC on the red button on the left side.

I'll be playing with it from now on, need to get used to it.
The Gambler
Since thnikk's keypads have Teensy LC in them for the logic boards, can't you just use the Serial.begin function? I swear 9600 baud is freakishly fast for scanning button states, only hampered by the limitations of HID-USB which is 1000 Hz.
Topic Starter
Thnikk
Update 1/27/16
Thanks to everyone for all of the reviews recently! It makes me very happy to wake up to a new review and I've gotten a lot of them over the past few days :)

Everything is back in stock as of this post except for some of the keypop keycaps. I'm probably going to make an order within the next few days so expect to see those within the next week or so.

ZenithPhantasm wrote:

Or better yet. You could 3D print custom housing that are easily removable without the need of special tools.
Shhhhhh, you're letting my secret plans out.

The Gambler wrote:

Since thnikk's keypads have Teensy LC in them for the logic boards, can't you just use the Serial.begin function? I swear 9600 baud is freakishly fast for scanning button states, only hampered by the limitations of HID-USB which is 1000 Hz.
I actually haven't used Teensy LCs for a while. My basic and basic+ models use Adafruit Trinkets (125hz because of USB 1.1) and by LED and RGB models use Pro Micros.
Toshiyuki Doma
I wish you make like that for osu!mania mode. :3
Emub
I got a new computer, and the keypad isn't working with it at all..
The buttons LEDs work perfectly in all modes, but there's no input when I press the buttons..
Topic Starter
Thnikk

arvinkent098 wrote:

I wish you make like that for osu!mania mode. :3
IT WILL HAPPEN... eventually. 4k/Taiko keypad first, but still probably not for a couple of months.

Emub wrote:

I got a new computer, and the keypad isn't working with it at all..
The buttons LEDs work perfectly in all modes, but there's no input when I press the buttons..
This should be fixed by reprogramming the keypad. PMed :P
Aydin
this is so cool man! ordered one LED keypad. i hope it arrives soon. also im in germany so how long do you think shipping needs?
Topic Starter
Thnikk

xOFlauschiOx wrote:

this is so cool man! ordered one LED keypad. i hope it arrives soon. also im in germany so how long do you think shipping needs?
Thanks! Most international shipping takes 1-3 weeks.
Aydin

Thnikk wrote:

xOFlauschiOx wrote:

this is so cool man! ordered one LED keypad. i hope it arrives soon. also im in germany so how long do you think shipping needs?
Thanks! Most international shipping takes 1-3 weeks.
Yeah. i ordered it january 24 or 25 cant remember :/ my friends dad ordered it for me because my mother is in turkey :P
[Sean]
Just grabbed one myself. Going to compare it to the osu!store version and see which one feels most at home to me ;)
XDD
Just got mine today. LED R2 with Gateron Clear Switches.

Shipping took around 3 weeks and cost a hefty 22 dollars. But I gotta say, it's pretty damn awesome. The switches are a significant improvement from my Razer Greens.

Although it did take several minutes to get used to, I found that my accuracy has improved and that I can now play higher BPM beatmaps than before. I've even gained 2k ranks just today.

The scotch sticks very well and the case is quite sturdy. All-in-all, the shipping could be a little bit cheaper, but other than that, it's a pretty well-built and quality product.

Thumbs up to thnikk for this keypad. :D
Aydin
why is mine still not here ;-; im getting really impatient D: i wanna try it so bad
show more
Please sign in to reply.

New reply