forum

thnikk's Osu! Keypads [Development]

posted
Total Posts
582
show more
Pituophis
I guess I'm the one who's confused.
Miralyn
Mine just came in today! I love the gateron clear switches already, a huge improvement over my cherry mx blues.
Thanks thnikk for the amazing keypads! :D
ZenithPhantasm

Pituophis wrote:

I guess I'm the one who's confused.
Niw you are less ignorant
KanoSet

Pituophis wrote:

I guess I'm the one who's confused.
google is your friend

Miralyn wrote:

i love the gateron clear switches already, a huge improvement over my cherry mx blues.
wai u do zis
Claire
The keypad was shipped to Finland in 10 days and I'm loving it so far. However this one problem came up just now; after four hours of gameplay, the other switch (which I tap more) is noticably harder to press than the other? It's not such a big deal as you don't notice it when playing, though I would like to fix this if possible.
EDIT: Okay, I can clearly feel it being harder. :L

Miralyn wrote:

Mine just came in today! I love the gateron clear switches already, a huge improvement over my cherry mx blues.
Thanks thnikk for the amazing keypads! :D
Basically this, a huge improvement from Cherry MX Blue to Gateron Clear. It is a bit weird at first but I'm getting used to it!
Topic Starter
Thnikk

Miiqa wrote:

The keypad was shipped to Finland in 10 days and I'm loving it so far. However this one problem came up just now; after four hours of gameplay, the other switch (which I tap more) is noticably harder to press than the other? It's not such a big deal as you don't notice it when playing, though I would like to fix this if possible.
EDIT: Okay, I can clearly feel it being harder. :L

Miralyn wrote:

Mine just came in today! I love the gateron clear switches already, a huge improvement over my cherry mx blues.
Thanks thnikk for the amazing keypads! :D
Basically this, a huge improvement from Cherry MX Blue to Gateron Clear. It is a bit weird at first but I'm getting used to it!
PMed with fix! :)
Zenyatta
Hey peeps,

one quick question. Got the Basic Keypad and it just doesnt work on windows 10. it worked before on it. I plug it in, it doesnt even blink red and just goes green and windows says its not working. Code 43. looked it up and didnt help. :x
Topic Starter
Thnikk
Update 12/27/2015

-The shop is back up with black RGB Keypads (glow in the dark keypads are back too!) There are 5 in stock so they'll last as long as they last, but everything will be back up by the end of this week/the beginning of next week.

-Giveaway is still going on! Post in this thread to enter: t/397995/start=75


CrsTramorio wrote:

Hey peeps,

one quick question. Got the Basic Keypad and it just doesnt work on windows 10. it worked before on it. I plug it in, it doesnt even blink red and just goes green and windows says its not working. Code 43. looked it up and didnt help. :x
resolved via PM :P
Pituophis
geez, They're already gone :/
Topic Starter
Thnikk

Pituophis wrote:

geez, They're already gone :/
Yep, I blinked and they're all gone. The last parts are scheduled to arrive by next Tuesday (curse you, national holidays!) so that's when I should have everything back up :)
Qenomo
What was the fix to the switch becoming harder to press?
Topic Starter
Thnikk
Update 1/2/2016
I hit 600 sales for 2015! Absolutely incredible. I started this out just thinking I was going to make one for myself, but I'm so happy that I was able to make keypads for 600 people. I would like to take a moment to thank you all for supporting me and say what my plans are for the beginning of the year:

-Make an osu!mania and taiko controller (with the advent of a 3d printer to help with the enclosures)

-Make a wireless keypad that doesn't suck

-Add RGBW LEDs to my rgb keypads for better whites and simplified code

-More that I'm forgetting right now

Qenomo wrote:

What was the fix to the switch becoming harder to press?
I think it came down to the way they were being pressed. Pulling down a bit (towards you) causes a lot more resistance in the switch, but they aren't really meant to be pressed like that.
KanoSet
wew thnikk is going serious :D
the wireless would be perfecr with the idea of the keypad purpose but i'm not sure about the latency tho
gl
The Gambler
Oh shit Thnikk is going for the mania controller.... Ganbatte
Not Jeef
Hit me up with those sexy RGB key caps



(I want those key caps)
Chyo-Kun
A mania controller would be awesome.

I'm guessing you're going for a classic 8 key controller without the beatmania style spinner (that would be hard to make)
Do you have any idea how the keys are going to be configured? Since there are a lot of styles

If you don't get what I mean:

http://www.overclock.net/content/type/61/id/2339078/ Arcade

http://cdn.overclock.net/a/a0/a0f0e028_ ... style.jpeg Korean

http://cdn.overclock.net/b/bd/bdb6b990_ ... oning.jpeg Hybrid

http://cdn.overclock.net/0/0d/0d2f538f_ ... style.jpeg Dexterity / "AEXFJI"

http://cdn.overclock.net/9/9c/9c88c1c7_ ... oplay.jpeg Full Arcade
The Gambler

Chyo-Kun wrote:

-snip-
Like this:

or this:


Or whatever Thnikk comes up with... He did say something about rendering in Fusion or something..

I'd say the hardest part is getting the casing. I'm sure there are shops that cut sheet acrylic though.
Chyo-Kun

The Gambler wrote:

Chyo-Kun wrote:

-snip-
Like this:

or this:


Or whatever Thnikk comes up with... He did say something about rendering in Fusion or something..

I'd say the hardest part is getting the casing. I'm sure there are shops that cut sheet acrylic though.
Holy, those casings are so big.
I honestly think that if he's going for an 8 straight key desing, a longer type of the Osu!standard one with 8 keys with a little space in the middle would do the trick, those looks sooo expensive to make and ship around. I wouldn't buy it if it costed more than a standard beatmania controller
Cataclysm
I ordered the keypad but unfortunately I didn't get the keys. What???!?! I am 100% sure I ordered them as I have the receipt.
Topic Starter
Thnikk
The mania controller was definitely a plan for late-early 2016. I definitely want to make the taiko one first for simplicity's sake and trying out my ideas. I'm definitely leaning towards something smaller for the mania controller though, not arcade size.

Symacon wrote:

I ordered the keypad but unfortunately I didn't get the keys. What???!?! I am 100% sure I ordered them as I have the receipt.
The keycaps come in a bag NOT pre-attached to the keypad so maybe you missed them in the package. If that's not the case, can you message me on Etsy so I can see your order?
Cataclysm
I sent an email already so I just wanted to make sure you knew what happened.

Edit: I sent the receipt too
The Gambler

Chyo-Kun wrote:

Holy, those casings are so big.
I honestly think that if he's going for an 8 straight key desing, a longer type of the Osu!standard one with 8 keys with a little space in the middle would do the trick, those looks sooo expensive to make and ship around. I wouldn't buy it if it costed more than a standard beatmania controller
It's just a render of the controller if I do end up building this for myself, using Sanwa switches as the buttons. The most expensive part for this build I would say is getting the acrylic cut for the controller. I don't think it would cost more than a BMS controller unless sheet acrylic cutting is that expensive.
Topic Starter
Thnikk

Symacon wrote:

I sent an email already so I just wanted to make sure you knew what happened.

Edit: I sent the receipt too
Can you send a message through etsy? I haven't received any emails.

Also, did you check the package again? They are in a clear bag so you might have missed it.
Otonashi
Hi Thnikk! I've sent you a message on Etsy, also I am wondering if you plan to restock the Led Keypads (r2)?
Topic Starter
Thnikk

iShinoa wrote:

Hi Thnikk! I've sent you a message on Etsy, also I am wondering if you plan to restock the Led Keypads (r2)?
I was shooting for the end of the week, but I may have to push it back to Monday. You can follow/favorite my shop to get notified of updates or you can follow me on twitter where I sometimes remember to post.
SmallerMoonstar
I have a question, are you able to switch the switches on the keyboard without using a soldering iron? Like the osu! nono keyboard. Thanks in advance!
The Gambler

SmallerMoonstar wrote:

I have a question, are you able to switch the switches on the keyboard without using a soldering iron? Like the osu! nono keyboard. Thanks in advance!
Pretty sure the nono is soldered on the PCB. I'm also assuming Thnikk's keypads are handwired, not using a PCB.
KanoSet

The Gambler wrote:

Pretty sure the nono is soldered on the PCB. I'm also assuming Thnikk's keypads are handwired, not using a PCB.
The Gambler

KanoSet wrote:

-snip-
Only shows the switch covers being swapped, not actual SIP sockets. There was a Massdrop keyboard that had socketed MX switches but it was long ago since that drop ended.
SmallerMoonstar

The Gambler wrote:

KanoSet wrote:

-snip-
Only shows the switch covers being swapped, not actual SIP sockets. There was a Massdrop keyboard that had socketed MX switches but it was long ago since that drop ended.
Yeah, not very good with keyboard terminology, so I kinda don't know this stuff :P But I meant if the keyboard could do something similar to the demonstration in the video
The Gambler

SmallerMoonstar wrote:

Yeah, not very good with keyboard terminology, so I kinda don't know this stuff :P But I meant if the keyboard could do something similar to the demonstration in the video
*Deep breath*

If you're a regular on this forum, you might be able to know what we are talking about. In any case, give this site a look.
SmallerMoonstar

The Gambler wrote:

SmallerMoonstar wrote:

Yeah, not very good with keyboard terminology, so I kinda don't know this stuff :P But I meant if the keyboard could do something similar to the demonstration in the video
*Deep breath*

If you're a regular on this forum, you might be able to know what we are talking about. In any case, give this site a look.
So from my understanding, and what you said, I can effectively "swap out" the switches by taking out the springs and such on the nono keyboard but not the entire switch itself? Also, does this mean that Thnikk's keyboard allows for the swapping of entire switches? If that's what happens when a keyboard is handwired. I was planning to get either the hnikk's keyboard and switch out the switches for Cherry MX Browns since he doesn't have it as an option.
ZenithPhantasm
It doesnt really matter if you swap it by popping the covers or SIP given every MX clone has the same exact housing other than color and material.
Topic Starter
Thnikk
Update 1/18/16

GUH, LOTS OF ORDERS. TRYING TO MAKE NEW RGB KEYPAD. NEW ANIME SEASON. DYING.

Keypads will be back up on Wednesday.


Switches can't be fully removed without soldering and you currently would have to remove the hotglue (very easy with rubbing alcohol) to open the switches, but I'm working on a way around this to make the same solution used on the nono keyboard available on my keypads. Expect to see it when the r3 RGB(W) keypad comes out ;)
ZenithPhantasm
Or better yet. You could 3D print custom housing that are easily removable without the need of special tools.
XDD_old_1
I want to get one of these, however, I want to know what everyone thinks about 125hz polling rate. That's an 8 millisecond delay. Is that a significant delay if I'm aiming to get to a really high rank?

I can't really afford any of the 1000hz ones (LED, RGB models). They cost 70 dollars including shipping as I'm from Australia and that's just a bit too much for two buttons.
KanoSet

XDD wrote:

I want to get one of these, however, I want to know what everyone thinks about 125hz polling rate. That's an 8 millisecond delay. Is that a significant delay if I'm aiming to get to a really high rank?

I can't really afford any of the 1000hz ones (LED, RGB models). They cost 70 dollars including shipping as I'm from Australia and that's just a bit too much for two buttons.
add few bucks and get a full mech keyboard from a local store.. it's a way better option
cooler master storm is the way to go
XDD_old_1
Does anyone here happen to know the polling rate of the official osu! nono keyboard?
KanoSet

XDD wrote:

Does anyone here happen to know the polling rate of the official osu! nono keyboard?
nope, sadly
totekingsg1
Got mine at home like 30min ago, and I'm already playing with it.

People complains about the polling rate. Do I actually feel any kind of lag? No, I don't. It feels exactly as my mech kb, except that my kb has blue switches, which are noisy as fuck. It is pretty comfortable since it is 10 times smaller than a kb, so I can place my hand much better.

I could chose between different switches, and decided to go for the Cherry MX red. It comes with 2 o-rings included on every key, which make the keys pretty silent.

U don't need to configure anything, u just plug in the keypad into the usb and it works properly. The default binded keys seem to be Z and X, and ESC on the red button on the left side.

I'll be playing with it from now on, need to get used to it.
show more
Please sign in to reply.

New reply