I fixed most of it.Jaltzu wrote:
EASY00:23:033 (1) - Try Tweaking the slider so that both head and tail are at the y-axis
00:29:830 (1) - No NC
00:31:002 (1,2) - Blanket?
00:36:158 (3,1,2) - Move these so that 00:36:627 (1,2) - are at the same level as 00:34:752 (1,2)
00:36:627 (1,1) - Proper blanket?
00:40:377 (1) - No NC. Try to make this stack with 00:36:627 (1) - head
00:43:658 (1) - No NC
00:47:408 (1) - ↑↑
00:48:814 (1) - ↑↑
00:49:283 (2) - NC
00:50:220 (1) - No NC
00:50:220 (1) - Move this to same level as 00:47:408 (1): http://puu.sh/aqyHD/d9b6738017.jpg
00:54:908 (1) - Move this better to the center of this pattern: 00:52:564 (1,2) => http://puu.sh/aqyNg/9c1adb781f.jpg
01:00:064 (1,1) - Fix blanket
01:02:408 (3,1) - ↑↑
01:03:814 - 01:04:048 - Slider
01:04:517 - 01:04:752 - ↑↑
01:10:377 (1) - No NC
01:11:783 (2) - NC
01:12:252 (1) - No NC
01:17:877 (1) - No NC
01:19:283 (2) - NC
01:19:752 (1) - No NC
01:22:095 (3) - Flip vertically
01:24:908 (1) - No NC
01:24:908 (1,1) - Blanket
01:24:908 (1) - Move to the center of 01:30:064 (1,2) - shape
01:51:158 (1) - End this slider at 01:53:970 and add a circle to 01:54:908. Add finish-hitsound to that circle. http://puu.sh/aqzbc/456f8b4c51.jpg
02:11:783 (1) - Move to x:344 and y:232. Remove NCNORMALThere's one DS error in AiMod: 01:22:095 (3,4) - Too close to each other.
00:25:377 (1) - No NC
00:26:783 (2,2) - Blanket
00:26:783 (2) - NC
00:27:252 (1) - No NC
00:30:767 - 00:31:002 - Slider
00:32:877 (1) - No NC
00:34:283 (2) - NC
00:34:752 (1) - No NC
00:39:439 (3) - Fix Blanket
00:40:377 (1) - No NC
00:40:845 (2,2) - Copy 00:42:252 (2) - > paste to 00:40:845, remove repeat and flip vertically -> mirrored pattern: http://puu.sh/aqzKD/e126a54ac9.jpg
00:44:127 (2) - Make this slider curved.
00:47:408 (1) - No NC
00:51:158 (2,1) - http://puu.sh/aqzPT/a67b088a20.jpg
01:00:064 (1,1,1) - Remove NC from all of those.
01:01:002 (1) - Flip horizontally + rotate 90° clockwise
01:04:752 (1,2) - Blanket
01:08:502 (1,2) - ↑↑
01:13:189 (3) - Move to x:232 y:296
01:13:189 (3,1) - Blanket
01:19:752 (2,1) - ↑↑
01:31:470 (2) - Move to x:208 y:192
01:36:158 (3) - Flip vertically + rotate 45 anticw
01:37:564 (1,1,1) - No NC
01:55:377 (1) - Flip vertically
01:57:252 (4) - ↑↑
02:16:002 (5,1) - Make a blanket. After that make 02:16:939 (1) - start from the same point as 02:16:002 (5) to keep that blanketed.
02:22:095 (2) - Make this slider's tail better blanketed with 02:20:689 (1)
02:23:970 (4) - NC
02:24:205 (1,1) - No NC
02:28:658 (1,2) - Small fix to blanket
02:38:970 (4) - NCHARD00:23:970 (3,4) - Don't stack
00:25:845 (3,4) - ↑↑
00:26:314 (5) - Curve this upwards
00:27:955 (4,5) - Fix blanket
00:37:916 (5) - Delete slider. Add a circle to 00:38:033
00:40:377 (1,2) - Don't stack
00:44:947 (4,5) - Stack
00:45:298 (1) - Flip vertically
00:48:580 (1) - ↑↑
00:50:923 (2) - ↑↑
01:00:064 (1,1,1) - No NC
01:00:767 (1) - Make this straight
01:01:470 (2,3) - Don't stack
01:17:877 (1,2) - Blanket?
01:32:408 (1) - Flip vertically
01:37:564 (1,1,1) - No NC
01:51:275 (1) - End slider at 01:53:970. Add slider 01:54:205 - 01:54:439 and repeat. Add circle to 01:54:908.
01:56:783 (1,2) - Fix blanket
02:11:548 (6,1) - Blanket
02:13:189 (1,2) - ↑↑
02:24:439 (1,1,1) - No NCFLUFFYCS4, AR8, OD8
DS1,0 or more
00:23:970 (3,5) - Fix blanket
00:45:298 (1) - This slider shape is annoying
01:00:181 (1,1) - No NC
01:20:220 (4) - Make this curved and blanket with 01:20:923 (1)
01:34:986 (1,2) - Move so that 01:34:752 (8,2) - will stack
01:37:681 (1,1) - No NC
02:04:752 (2) - Less repeats, plz
02:09:205 (2,3) - Don't stack
02:12:252 (2) - Move to x:496 and y:184
02:21:392 (6,2) - Stack
02:22:564 (3) - Flip vertically
02:24:439 (1,1,1) - No NC
I suggested to change quite a lot, but I honestly think this is pretty good map.
Godd luck!
Thank you so much!